129,508 used machines on RESALE, but how to find them? Machine Search
weight max. in kg: 10000 kg weight: 10 kg with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible.
pressure: 100 t stroke: 400 mm daylight longitudinal/sideways: 1010 x 300 mm Motor output: 4,0 kW liter capacity: 11,0 l dayligth: 900 mm table surface area: 1010 x 560 mm feed down: 4,8 mm/sec feed up: 7,5 mm/sec weight of the machine ca.: 0,9 t dimensions: 1550 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brown & Sharp 1000 x 2000 mm
Inv. Num. : 8737 Type: NX 100 Producer: MOTOMAN Created: 2008 Parameters: The workplace consists of the following components: 2 Yaskawa NC100 robots TPS5000 welding power sources Fronius air purifier 2x Single Column Positioner (Dekona 101) 1x double column and single axis positioner
Used cone mixer Vrieco Nauta mixer Type 100-RV-5 Material: Mild steel Max product weight 7,000kg Previously, gelatin was mixed with this mixer The mixer is in an uninspected condition. Revision work is also offered at the sale. See pictures
8/0 , 4/4 CP-Tronic CPC 1-04 Autoplate Auto washers 340 million impressions
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
Reference ID PP-52867 Category 5-Colors Manufacturer Heidelberg Model SM 102-5-P3 Year Built 2003 Color 5 Impression 259 Working Hours - Speed-- Max. size 72x102 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description 5 colors perfecting 3/2 Print Count: 259 Million Desk-mounted remote control, all settings from the desk, CP 2000, alcohol dampening, Automatic Plate
Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Working hours : 134.000 h
Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Hours : 138000 h
Manufacturer: EOS Model: M 100 Year of Manufacture: 2016 Machine Type: Laser-Sinter System / Metal 3D Printer Build platform: Diameter 100 mm x Z 95 mm Technology: DMLS Materials: CoCr, 316L, option available for Ti64 Laser: Yb-fibre laser; 200 W CE Certified: Yes Electrical Specifications: - Voltage: 230 V 1~ / N / PE or 200–240 V 2~ / PE - Full Load Current: 8 A - Net Fuse: 16 A (1~) / 15 A (2~) - Frequency: 50 / 60 Hz - Nominal Power: 1.7 kW - Short Circuit Current Rating: 5 kA Physical Specifications: - Total Weight: 570 kg Condition & Notes: - Machine is fully functioning, but currently missing a filter, which is required for operation. - Last maintenance: 17/08/2024 — the machine has not been used much since. - No accessories included with the sale. - A Concept Laser QM powder sieve can be sold separately if required. Find more here - / Contact us at -
Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.
Work table AT 1000 with beech wood top and flour trolley with beech wood worktop and gallery at the back 2 stainless steel flour trolleys for 100 kg each Stainless steel Dimensions: 1000 x 800 x 870 mm, WxDxH Used device cleaned Plate sanded & re-oiled Quality from a specialist company! Benefit from over 35 years of experience!
A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.
Leaching machine Drautz RD 100 Drautz Model RD 100 Compact design 1 man operation & easy cleaning 2-fold lye curtain with puller Connection 400V, 16A-CEE plug Machine with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!
pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2550 mm stroke: 150 mm total power requirement: . kVA Number of working hours: . h workpiece: workpiece: Number of strokes: total power requirement: kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: m Back gauge 400mm Throat 250mm Speed: 8mm /S kW: 6,5 Volts: 380 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your ...
Replacement column for IDRA 3300, D330mm x 7115mm, (8), 102016, Strate/Idra, used Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Used The column is in a used condition and is still functional. However, the surface of the column already has many surface defects. The column can be used as a reserve for emergencies or as raw material for a new D300 column. That's why this column will be sold at a particularly low price. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
sheet width: 1020 mm plate thickness: 2 mm distance between columns: 1020 mm bending angle max.: 135 ° total power requirement: 0 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1350 x 850 x 1175 m Max. bending angle 135° Manually operated with auxiliary spring on both sides. Upper beam opening 40 mm, Upper and lower beams segmented, Segment division: 25-30-35-40-45-50-75-100-150-200-270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Demag hoist DCS PRO 10-1000 1 TON
3D coordinate measuring machine XM 1600 control unit Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Accuracy: +/- 7μm Repeatability: +/- 3μm
TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS&FREUDENBERG Name: Dewatering screening machine Type: "Roberg" 1000/2500/1 Year of manufacture: unknown Screen length: 1,000 mm Screen width: 2,500 mm
An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.
Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour frame: Ral 5015 blue Material colour half-timbering: sendz. galvanized Frame profile: PLFB 30 Profile dimensions: P 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,250 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Takeuchi TB108 - mini excavator, - Year of construction: 2009, - Dead weight: 860 kg, - Engine power: 7,1 kW
Extension arm suitable for 6-10t mini excavator / extension arm to fit 6-10t excavator, length 2 m, weight 230 kg, rear mount 2x fixed bolted, front mount with various quick couplers possible (on request)
B&A REF: 9213 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE: HYDRAULIC
Year of manufacture 1995, 14,800 km, off-road tires, Maxwald cable winch with function control, price on request
Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Bed size 105x 147 cm Pneumatic clutch full working condition Video available
Manufacturer: Heina Model: TT2-1000/1000 Year of Manufacture : 2018 Condition : Very Good Find more here - / Contact us at -
Height=6 m, Overall length= 21 m, Overall width= 3 m, Description proofer for 4 carts climate control Lillnord PG-1000 used in working condition
DH Robotics RGI-100-14 Rotating Electric Gripper without Brake Gripping force (per back): 10~35 N Stroke (both sides): 14 mm Rotational torque: 0.25 Nm Rotation Range: Infinity Mechanical data Maximum rotation speed: 1500 degrees/s Rotation repeatability: ± 0.02 degrees Rotation clearance: ± 1 degree Position repeatability (gripping): ± 0.02 mm Open/close time: 0.2 s/0.2 s Weight: 1.1 kg Electrical Specifications Communication interface: Modbus RTU (RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Rated current: 1.1 A Peak current: 2 A Degree of protection: IP 20 Recommended Operating Environment: 0-40°C, < 85% RH
DH Robotics RGI-100-30 Rotating Electric Gripper without Brake Gripping force (per back): 10~35 N Stroke (both sides): 14 mm Rotational torque: 0.25 Nm Rotation Range: Infinity Mechanical data Maximum rotation speed: 1500 degrees/s Rotation repeatability: ± 0.02 degrees Rotation clearance: ± 1 degree Position repeatability (gripping): ± 0.02 mm Open/close time: 0.2 s/0.2 s Weight: 1.2 kg Electrical Specifications Communication interface: Modbus RTU (RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Rated current: 1.1 A Peak current: 2 A Degree of protection: IP 20 Recommended Operating Environment: 0-40°C, 85% RH
Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Lillnord temperatures: +20°C – +45°C humidity: 60%-95% power: 6,2 kW, 380 V Made in Denmark Description for 10 m3 proofer used
grinding length: 1000 mm grinding width: 750 mm workpiece height: 700 mm Control: SIEMENS, SIMATIC S 7-1500 table surface area: 1050 x 640 mm table height over floor: 1000 mm table speeds: 3.000 - 30.000 mm/min cross feed of table continual: 5 - 5.000 mm/min cross feed of table intermittent: 0,1 - 65,0 mm vertical adjustment, 1 graduation: 0,002 mm rapid traverse vertical: 0,25 m/min grinding spindle speed: 50 - 2.500 U/min grinding wheel size: ø 400 x 50 x ø 127 mm workpiece weight: max. 1.000 kg table load: max. 1600 kg total power requirement: 33,2 kW weight of the machine ca.: 9,3 t dimensions of machine L x W x H: 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction The data for this ad was created with ModulMWS - the software solution of Log ...
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Materials: PET, APET, RPET, GRG, GAG, G-PET, PS, PP // Film Width (Max): 700 mm
Maximum Diameter: 800 mm // Minimum Diameter: 280 mm
ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for the highest performance. This range includes all the main characteristics of RF ranges in terms of efficiency, Power factor, ventilation, internal structure (dedicated 3 compartments) and general flexibility. An integrated digital interface with OLED display and integrated USB enables the best and easiest overview/setting of charging parameters, diagnostic and data reports. Main features AC mains voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Display: OLED/LCD display, 4 LEDs and 4 control buttons Setting Type: OLED Display: Current, Capacity and 7 pre-set Charging Characteristics Through PC laptop/USB port: advanced programming Data storage: report on the last 50 charges and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heat sink ...
- VAC 100a Station - 2 x VAC 100m Station - ST-40 with SPF-CV infeed conveyor - SPF-20A Stitcher & Folder - FC-20A Trimmer - Standard delivery
APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...
Properties: Length 800 mm Width 330 mm Total height 770 mm Weight 22.4 kg Manufacturer ELMOR MORATTO - Italy Speed 905 min ̄¹ Installed engine power 1.85 kW Series: 03-13-5620.004 Connections: Input: DN 50 Output: DN 50
x-travel: 1035 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain type: iTNC 530 table surface area: 1400x650 mm workpiece weight: 1000 kg Tool changer: . spindle taper ISO: SK40 Spindle capacity: 10 KW turning speeds: 8000 U/min total power requirement: 20 kVA weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 15425033554 Chip conveyor 2 hydraulic vises Operating hours: 53005 Spindle hours: 12233 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers ...
number of heads: 4 serial no.: 92.847 bore diameter: 3-8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Uhlmann C 100 horizontal cartoning machine Modified 2025 - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Cognex 1D barcode and 2D matrix code reading system for leaflet and folding carton code - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump or Venturi nozzle
Gathering Machine Horizon VAC 100 a/c + SPF-200A + FC-200A Year of construction 2009 Art.Nr. L1103 Collector Horizon VAC 100 a + c Sewing Machine SPF-200A Trimmer FC-200A Turret "a" 2.08 million, trimmer 2.04 million
maximum number of results exceeded
please refine your search
