wh 10 cnc used for sale

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength: 1000 mmWidth: 800 mmThickness: 250 mmWorking height: 820 mmPlate thickness: 30 mm throughout- height-adjustable metal substructureWeight: approx. 400 kgSurface rusted; used

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmWidth 1000 mmThickness 230 mmWorking height 970 mmPanel thickness 38 mm throughout- Metal baseWeight 450 kg; used

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132Fabr. No. 173082 - 3101 Year of manufacture: approx. 1995Volume flow: approx. 50 m3/hNegative pressure: 0.5 mbar (indicated on the nameplate)Negative pressure: - 0.9 bar (determined during test run)Engine power: 3 kWMotor speed: 1420 rpm. Mains connection: 400 volts, 50 Hz- Oil-lubricated rotary vane pumpDimensions L x W x H: 700 x 420 x 310 mmWeight: 78 kgGood condition; used

Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-

Straightening and welding plate SIEGFRIED WEYRAUCH GemmingenCast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmwidth 800 mmthickness 28/125 mmworking height approx. 850 mm- feet with adjustment screws for aligning the plateWeight 370 kggood surface; used

Turning table, 180 rest table, rotary table with aluminium topPositioning table, rotary table, round dividing table 180Assembly table, swivel tableTurntable: 1080 mmOverall height to top edge turntable: 630 mm- Turntable made of 25.5 mm thick aluminium plate with various holes- very stable turntable, can be rotated by hand- 2 pieces index locking positions 180, manually via foot lever for de-latching- stop damper under the turntable for the locking positions- very stable steel substructure- flange plate steel substructure L x W x H = 600 x 600 x 20 mmSpace requirement

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801899 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.7 metersPower supply: 400 volts, 50 Hz1 load train = 100 kgWeight 16.5 kgGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801900 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz1 load string = 100 kgWeight 16.5 kgGood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedheavyheavy, straightening plateLength: 1985 mmWidth: 1000 mmThickness with ribs: 220 mmWorking height: 860 mmPanel thickness: approx. 35 mm throughout- 4 pieces height-adjustable feetWeight 1050 kg; used

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

CACCIA HOT & COLD TURBOMIXER, Type CP1000, Hot mixer capacity 1.000 lt, 203 kw a.c.drive, + 1 CACCIA AG 3000, cooling unit, capacity 3.000 lt., installed power - used power in work: about 60-65% : 203 kw, availability: 3 weeks, capacity: 1000 hoìt -3000 cold, conditions: reconditioned, type: for PVC

turning diameter: 545 mm turning length: 753 mm control: Mazatrol Matrix 2 Main Spindle:: c-axis: 0,0001 ° spindle motor: 11 kW spindle turning speed range: 6000 U/min x-axis: 410 mm z-axis: 805 mm y-axis: 140 mm w-axis: 903 mm b-axis: 225 ° bar material dia.: 61 mm Rapid Travel X / Y / Z-Achse: 30/26/30 m/min 2nd Spindle:: c-axis: 0,0001 ° power capacity: 11 kW spindle turning speed range: 5000 U/min milling spindle: spindle turning speed range: 12000 U/min spindle motor: 5,5 kW total power requirement: 45,6 kVA weight of the machine ca.: 7,7 t dimensions of the machine ca.: 3,1 x 2,495 x 2,5 m 5-axis simultaneous machining - CNC control Mazatrol Matrix 2 - Main & counter spindle - 9-position tool turret - Tool changer (20-fold) - Capto C6 milling spindle - Coolant system IKZ 20bar - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech ...

Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)

We offer you the following for purchase here: Item number: 4969 Beckhoff CPPC 7112-1007 Beckhoff PC Monitor with Stainless Steel Keyboard Beckhoff CPPC 7112-1007 Beckhoff PC Monitor with stainless steel keyboard Motherboard: Boser HS6237 SBC CPU: Intel Celeron Memory: 128 MB SDRAM Slot 1: Slotplate with USB ports and DVI-port Ivisuqoho Slot 2: Boser SBC-V2.2B Slot 3: Slotplate with COM 1 and COM 2 Slot 4: Slotplate with LPT 1 Harddisk: Toshiba MK2023GAS, 20GB CD ROM: Teac 235HF 1.44MB A: Display: 15 inch Toshiba LTM 15C428S The monitor does not include a touchscreen. Touchpad: Glidepoint on PS/2 Ports: KT 7000 on PS/2 Power supply: 24V Dc Lodk Rqeu Ef Rqefcushi Item condition: used More PC monitors - new and used - can be found in our shop! International shipping costs on request!

Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg

Transnorm belt conveyor GF 25000-1000-900 RA2416 Technical data: Conveyor length (NL): 25000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 25000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...

Inv. Num. : 8553 Type: VOC 1000 Producer: INTOS Created: 2003 Parameters: Control system: Siemens 810D Work table length: 1100 mm Work table width: 500 mm Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine weight: 4500 kg

Sandretto serie 8 MEGA T 1000 année 1996 Force de fermeture : 1000 T Diamètre vis d'injection : 150 mm Volume injectable : 11296 cm3 Epaisseur moule min/max : 450mm/1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1500 L Dimensions : 15,1 x 3,15 x 2,81 m

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: grey Frame profile: PLFB 16 Profile Dimensions: P 100 x 65 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 8,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: grey Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 8,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Key data: 30 kN, 1000 mm

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Title: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Type: RS 30/1000 Machine No.: 3813 Year of Make: 2019 Never put into operation Full documentation without broaching needles Workspace Stroke: 1000 mm Gross tractive force: 30 kN small/large cutting speed: 1.0 – 7.5 m/min small/large return speed: 1.0 – 7.5 m/min Indoors: Tool feeder: by hand/independently Large workpiece Ø: 300 mm Outdoor spaces: fixed/movable/rotatable workpiece clamping plate Area of clamping plate: 255mm x 400mm T-slots: 2 pieces, 14mm wide, parallel/perpendicular to the clamping surface of the tool carriage Accessories/special equipment: Coolant Setup Broaching tool safety Machine hood to protect the working area Area requirement: 0.72m x 1.3m x ...

• Width of belt conveyor 100 mm • Length of belt conveyor 1170 mm • Height of stand 1300 mm, height can be adjusted • Inclination of conveyor adjustable • Drive 400V/0.7A/50Hz/0.25kW

Nominal pressing force ... 100t Table dimensions ... 1000 x 640mm Stroke adjustment ... 125mm Plunger adjustment ... 90mm Number of rams ... 75-150 rpm Main engine power ... 6/10kW L x W x H ... 1725 x 2230 x 2970mm Mechanical weight ... 10100kg

Code: 0190 Brand: MASTERWOOD Model: PROJECT TF 100 - CE Standard CNC point to point throughfeed boring machine for panels, furniture, custom-made furniture, kitchens, bathroom furniture, carpentries and various - CE Standard Features: Robust clamping device for panel translation running on linear guides with preloaded ball bearings and moving by means of ball screw with high precision and stiffness. Brushless motor Working table: table with idle rubber wheels for panels in and outfeed . Panel movement on air film to avoid any scratching of panels with delicate surfaces . Panel pusher for smooth and accurate movement. Longitudinal sinking reference stop. Automatic reading of panel length Operating unit: boring head with vertical and horizontal spindles plus grooving saw unit. Centralised chips suction outlet Numeric control with PC: Windows operating system - network connecti ...

Beck Wand 1000/2000 Extraction Wall Extraction wall Type: Beck Wand 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet metal evenly distributed. For connection to a central extraction system via a suction nozzle at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom of the front of the wall. Uses: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: NW 250 top center Recommended extraction capacity: 3000 m3/h Paintwork: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: 2970,-€ More items - new and used - can be found in our shop! International shipping costs on request!

Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height, Weight approx.: 6. ...

Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025.

welding current: 30 - 100 A cutting capacity: max. 50mm mm open-circuit voltage: 170 V Required air-pressure: min. 4 bar connected load: kW connected load frequency: 400 V weight: 0,75 kg Dimensions (LxWxH): 1,2 x 0,7 x 1,0 mm Plasma cutting machine with cart - 105 RTX torch - Includes 7m hose package - Spare nozzles - Like new, ready for immediate use The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1,100 litre turbo stirrer/ turbo mixer made of V2A

Injection moulding machine Arburg Allrounder 470 H 1000-170 BJ 2010 Clamping force 1000 kN Screw diameter 30mm Screw length 930 mm Shot weight 77g With Arburg robots

An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible.

pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

table length: 2000 mm table width: 1000 mm Plate thickness: 55 mm table height: 1000 mm plate height: ca. 200 mm weight of the machine ca.: 0,85 t dimensions of the machine ca.: 2x1x1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the safety pin: System: Arestant Type: AS The scope of delivery includes: 10x Safety pins, used Material colour: compl. galvanized Weight: 0,018 kg/pcs. for securing the longitudinal members against unintentional lifting Currently in stock Available: approx. 667 pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.