wh 10 cnc used for sale

Drawbar, drawbar, overrun brake -Height-adjustable drawbar -crooked -with overrun brake -Support load: 100 kg -Maximum permissible total weight: 1000 kg -Number: 12x drawbars available -Price: per piece -Weight: 40 kg

Spiral spring, steel spring, compression spring -Diameter: Ø 100 mm -Length: 135 mm -Wire thickness: 9 mm -Number: 148x springs available -Price: per piece -Minimum order: 3 pieces -Weight: 0.7 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of GSL (German Standard Lift) work platforms -Drive shaft: Ø 22 mm toothed - universally applicable -Number: 11 motors available -Price: per piece -Dimensions: 175/170 mm -Weight: 6.5 kg/piece

-extendable spiral mixer Kemper ST 100 A -with 2 automatic timers -with flour dust cover -Boiler right left-hand rotation - Stainless steel spiral and guide rod -with 2 stainless steel boilers -per cauldron for max. 100kg flour or for max. 160kg dough -Boiler manual locking -Machine is equipped with 2 new timers

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE 100 UK-2RS -Number: 3x spherical bearings available -Price: per piece -Weight: 4.5 kg

Drive chain, duplex chain, roller chain -Length: 3.048 m -Price: per meter -Number: 2 chains available -Weight: 5.9 kg

Guide rail - support rail for shafts, rails -Type: 1050-620-00 -Holes: 6.5 mm -Holes spaced 100 mm -Price: per piece -Quantity: 6 pieces available -Dimensions: 600x50xH23 mm -Weight: 1 kg/piece

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE 100 TA-2RS -Number: 6x spherical bearings available -Price: per piece -Weight: 4.5 kg

Vibration warning signal -Type: PA 100 -Quantity: 6 pieces -Price: per piece -Weight: 0.2 kg/piece

Temperature controller, temperature sensor, temperature setting -Type: Pt 100 Din -1 package, contents 10 pieces -Weight: 0.8 kg

power resistor, wire potentiometer, resistor -Price: per piece -Number: 4x available -Weight: 0.5 kg

Balancing valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Dungs, safety relief valve -Type: FRSBV 1010 -Connection: DN 25 -Dimensions: Ø143 x 190 mm -Weight: 1.2 kg

Power supply, power converter, power supply unit, switching power supply, MC3 controller -Manufacturer: Krauss Maffei, power supply unit from injection molding machine -Type: NT 100 -Dimensions: 260/140/H130 mm -Weight: 5 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-40-105-PPV-A -Stroke travel: 105 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 x 1.25 Quantity: 3 pieces Price: per piece -Dimensions: 270/55/H75 mm -Weight: 1.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-32-105-PPV-A -Stroke: 105 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M10 x 1.25 -Quantity: 5 pieces -Price per piece -Dimensions: 260/45/H70 mm -Weight: 0,8 kg / pc.

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Manufacturer: SP, Step clamps, clamping range 100 - 220 mm -T-slot nuts: mm -Quantity: 3 pieces -Price: per piece -Dimensions: 130/70/H245 mm -Weight: 3.3 kg/piece

Control: Max.travel range: X 800 mm Y 850 mm Z 500 mm Wave length:1,06 um Average power:100 Watt Max. peak pulse power:9 kW Laser crystal:Nd:YAG Made in Germany

Stop for lathe support, longitudinal stop, lathe, support stop -Clamping tool: stop for lathe support -Bore: Ø 45 mm -Dimensions: see photo techn. drawing -Total dimensions: 134/100/H186 mm -Total weight: 9 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tool, step claws, low clamps, clamping irons, clamping brackets -Clamping tool: clamp -Shaft: Ø 40 mm -Dimensions: see photos -Total dimensions: 505/100/H145 mm -Total weight: 12.7 kg

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany

number of feeders: 4 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm -Weight: 1548 kg

: 100 t diameter: 40 mm throat: 760 mm total power requirement: 8,5 kW weight: 3.600 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gurutzpe Super AT lathe. Distance between centers: 4000mm. Swing: 1020mm. Swing over carriage: 710mm. Swing in gap: 1320mm. Bore: 76,5mm. Motorized carriage. 4 independent jaws chuck. DRO Heidenhain.

Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Stöber, Gearbox type C002NO 105MQ10 -Translation: i 10,297 -Drive shaft: Ø 20 x 40 mm -Dimensions: see photo technical drawing -M2 perm: 43 Nm / n1= 3000 rpm -Dimensions: 240/140/H155 mm -Weight: 9.1 kg

PLC control, CPU, main memory, CPU, central unit -Manufacturer: Siemens, central device Central Controller Simatic -Type: Simatic S5 101U 6ES5 101-8UA13 -Dimensions: 260/115/H165 mm -Weight: 2.9 kg

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

PLC control, central module, memory, CPU, central device, positioning module -Manufacturer: Siemens, positioning module Simatic S5-100U CPU 102 -Type: 6ES5 266-8MA11 -Quantity: 1 piece available -Dimensions: 100/45/H135 mm -Weight: 0.3 kg

Gears, spur gears, bevel gears, worm gears -Manufacturer: Nord, gearbox type SK 42125AD-100 L/4 -Translation: i = 87.30 -Drive shaft: hollow shaft Ø 60 x 235 mm -M2 max: 1892Nm -Dimensions: 380/250/H470 mm -Weight: 101 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD A3-100, HSD P3-100, P3-100, 1- 4.5 bar -Diameter: 19mm -Length: 45mm -Number: 21 pieces available -Total Cost -Total weight: 0.5kg

USED TETRA PAK A3 FLEX 1000ML PRISMA FILLING LINE FOR SALE Item #: Usm-193 Category Tetra Pak A3 CF/Flex A3 Flex 250ml Slim and 1000ml Prisma Filling Line For Sale A3 Flex 250ml Slim filling machine with 1000ml Prisma Volume change kit, Version 100v, Speed 7000 PPH Straw applicator TSA 21 Cap applicator 45 for stream cap Tetra Pak packer TCBP 70 Tetra Film wrapper 67 eady ride and conveyors paper trolly Condition: Good

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, double hydraulic pump -Manufacturer: Orsta, double hydraulic pump -Pump 1: Type A 6.3 R -Pump 2: Type C 16-2 R -Motor: VEM KMR 112 M4 5.5 kW / 1440 rpm -Total dimensions: 725/250/H290 mm -Weight: 65 kg

Gear motor, electric motor, electric gear motor -Manufacturer: ASUG VEM, geared motor -Transmission: ASUG type GWWN 1052 -Engine: VEM type KMR 56 K 4 -Power: 0.12 kW / 1360 rpm -Protection class: IP44 -Total dimensions: 290/135/H185 mm -Weight: 10 kg

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control unit from Bierrebi TA 103 automatic cutting machine -Dimensions: 435/225/H80 mm -Weight: 1.5 kg

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control unit from Bierrebi TA 103 automatic cutting machine -Dimensions: 435/220/H90 mm -Weight: 1.6 kg

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control module from Bierrebi TA 103 automatic cutting machine -Circuit board: Type 2.028.01.063.02 -Dimensions: 460/150/H65 mm -Weight: 2.7 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm -Weight: 3 kg

Alcolor Vario continuous dampening Autoplate (semi automatic plate loader) Ink unit temperature control (Technotrans Beta C) Cooling and recirculation Impression-cylinder washing device - automatic Ink-roller washing device - automatic Blanket washing device - automatic Non-stop feeder Powder sprayer (WEKO AP 110) Preset Plus feeder Prinect Press Center AirStar Pro - Central air supply cabinet Prinect Easy Control - Color Measurement

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, press cylinder -Manufacturer: Hänchen, hydraulic cylinder type 120 10100-01 -Piston: Ø 60 mm -Piston rod: Ø 30 mm / M24 x 1.5 -Stroke: 50 mm -Max. pressure: 150 bar -Dimensions: Ø 95/270 mm -Weight: 9 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Manufacturer: DEC, ventilation hose ovp -Type: Greydec 100 - 203mm x 6 meters -ART.code: DG1203/6 -Dimensions cardboard: 400/220/H220 mm -Weight: 3.1 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Manufacturer: DEC, ventilation hose, original packaging -Type: Greydec 100 - 152mm x 6 meters -ART.code: DG1152/6 -Cardboard dimensions: 400/175/H175 mm -Weight: 1.7 kg

Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters

Turntable Bausch + Ströbele further information on request

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: tmg, temperature sensor type VH54.9i301 -Item No.: 1012919 -Measuring range: -40 to 50°C -Number: 3x temperature sensors available -Price per piece -Dimension: 263/136/83mm -Weight: 0.6 kg/pc.

Wet spent grain silo, Fabr. VetterTec, for 10 m³ net capacity, made of mild steel St 37-2, outlet hopper inclination 60°, with Discharge screw 3.0 m long, with control cabinet and remote counting device, standing on supporting structure, with Vertical ladder, Ø: 2,500 mm, cyl. Height approx. 2,000 mm

Filling machine for PFS and Cartridges in nest; for testing and small batches. Dimensions: 1,500ｘ 1,135ｘ 2,000 mm Max. Output: 4.800/hr Filling volume: 0.5 - 50 ml Supported package: 20/30/42/64/100/160 nest Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination. DFVN 1000 series is the smallest filling and stoppering machine by Groninger. Designed as a filling and closing machine for presterilized disposable syringes in nest for laboratories, test series and small batches. This semi-automated stoppering and filling machine offers processes identical to those of a high-output system. The machine supports manual nest handling under laminar flow. Clear separation between the manual handling section and the fully automatic production section.