wf 10 used for sale

CONTROLS   PLC SIEMENS S7-400 PRESS DESIGN   drive system: hydraulic   number of suspensions: 1   slide ejectors / cushion: no   table cushion: no   opening in table: no   feedstock transport direction: back-front PRESS FORCES   total force (nominal): 1000 to PRESS TABLE   table surface (left-right): 2066 mm   table surface (front-back): 2000 mm   height above floor level: 630 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 600 mm/s   working velocity min.: 15 mm/s   working velocity max.: 40 mm/s   return velocity max.: 390 mm/s   return force: 100 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1710 mm   distance table - slide max.: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 160 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   height abov ...

PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 60 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 470 mm   lower table (front-back): 470 mm   upper table (left-right): 500 mm   upper table (front-back): 470 mm   shut height max.: 277 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 180 mm ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1950 mm   space requiremen ...

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch                200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device (circulating air) with heat recovery 5 heating elements each 9 kW driven roller conveyor

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

The scope of delivery includes: 01x Stand protector, used Manufacturer: Nedcon Material color: blue Drhw0R Total height: approx. 900 mm Stand protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg size: approx. 65 x 65 mm Height deflector: approx. 50 mm Drill hole spacing: approx. 60 mm Drill hole diameter: approx. 11 mm suitable for frame profile width: 100 mm including mounting material composed of: 04x Hexagon Bolt M 10 x 35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately d ...

Harrison M400 Ø 430 x 1000 mm Distance between centers: 1000 mm Swing over bed: 430 mm Swing over cross-slide: 254 mm Diametre of main spindle bore: 65 mm Power on main spindle: 7,5 kW Number of speeds: 10 > 2000 rpm Length: 2740 mm Width : 1000 mm Height: 1270 mm Weight: 2 ton

turning diameter: 1000 mm turning length: 4000 mm turning diameter over bed slide: 680 turning speeds: 0 - 1400 U/min control: Siemens 810 D tool turret - number of stations: 2 centre distance: 4000 mm drive motor: 30/37 kW Torque: 4140 Nm bed width: 550 mm max. workpiece weight between centres: 4800 kg max.workpiece weight:each extra steadyrest: 700 kg spindle diameter in front bearing: 150 mm spindle bore: 104 mm total power requirement: - kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7 x 2,8 x 2,16 m equipped with: - CNC control Siemens 810D ShopTurn - jaw chuck - steady rest - 2-fold steel holder 23500h switch-on hours, 9300h spindle running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1994 1 pipe reactive law equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

Manufacturer: KUKA Model: KR 100-2 PA Year of Manufacture: 2009 Weight: 1240 KG Work Area Dimensions: - A: 2,180 mm - B: 3,037 mm - C: 3,200 mm - D: 2,160 mm - E: 1,040 mm - F: 1,350 mm Total Volume: 72.7 m³ Techincal Details: - Maximum Reach: 3,200 mm - Payload Capacity: 100 kg - Additional Load on Arm/Swing/Carousel: 50 kg / ~200 kg - Maximum Arm & Swing Load: 50 kg - Total Maximum Load Capacity: 350 kg - Number of Axes: 4 - Mounting Position: Floor-mounted - Design: Standard - Position Repeatability: ±0.25 mm - Path Accuracy: Not specified - Controller: KUKA KRC2 Edition 2005 - Weight (Without Controller): Approx. 1,200 kg - Operating Temperature Range: +10°C to +55°C - Protection Class: IP65 (Dust & Water Resistant) - Installation Footprint: 1,006 mm × 1,006 mm - Power Supply Requirement: 13.5 kVA - Noise Level: < 75 dB

x-travel: 600 mm y-travel: 270 mm z-travel: 430 mm : 630 mm table-size: 1120 x 270 mm spindle turning speed range: 45 - 1660 U/min spindle taper: SK 40 control: konventionell spindle motor: 2,2 kW total power requirement: 2,4 KVA weight of the machine ca.: 1,35 t dimensions: 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990

Manufacturer: Stöber Frequenzumrichter, Type: 1040B, Serial number: 1073873/791,

Manufacturer: Biesse, Type: Selco EB 108, Year: 2008, Program: Selco Optiplaning, Optimisation: Selco Osi Plus, Max plate format mm: 4200 X 2200, Saw blade protrusion: 107, Cutting lenght mm: 4200, Working hight mm: 95, Vorschub Sägewagen : 100, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 400, Säge verstellbar über Steuerung: yes, Number of clamping tools: 9, Main motor kW: 13,5, Feeding speed continous adjustable: yes, Feeding from front side: yes, Feeding speed continous adjustable: yes, Year :2008

Manufacturer: Stöber Umrichter, Type: 1040 B, Serial number: 1172564/894,

Manufacturer: Transporband 1000 X 780 mm, Working length mm: 1000, Working widht mm: 780, Total hight mm: 920, Total power kW: 0,7,

Manufacturer: Pilz Netzteil C-P8-E Enstörfilter Eingabe, Type: 24 volt 10ms, Model: 3069100,

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Serial number: 02751,

Manufacturer: Biesse , Type: Skipper 100, Year: 2005, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2005

Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007

Manufacturer: NUM , Type: 1040 W1, Model: 139241, Year: 2000, Year :2000

Hersteller : Hitachi Umrichter, Type: L 100, Card number: 463PT19123, Free text 1: Input 50/60 Hz , Free text 2: 200-240 Volt, Free text 3: 16 Ampere,

Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006

Manufacturer: Böhl Wickelmaschine, Type: Meister S 100 +FM, Year: 2005, Control: ESA, Work piece width min-max mm: 300-850, Min.-max. workpiece length in mm: 1500, Min.-max. workpiece height in mm: 50-500, Belt conveyor: 6 Meter vorlegeband, Ausrichtstation: yes, Width:165 to 250 mm: yes, Automatic product recording: yes, Belt tension adjustable: yes, Function repeat: yes, Min. cycle rate: 4, Feeding belt L x W x H mm: 2500, Year :2005

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014

Hersteller : Homag Floppy, Spare part from machine: Einschub Floppy, Type: HD SCSI 10TE CPU 30, Serial number: 2-083-03-0045,

Manufacturer: Stöber, Type: FBW 1060 X, Serial number: 20922/392, mH/Hz: 100 Hz, Power Output: 3 x 220,

Manufacturer: Stöber Umrichter, Type: 1040 B, Serial number: 1164833/794,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/B, Serial number: 794, Serial number: 1167218,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/B-1, Serial number: 1292, Power Output: 1,5 KVA,

Manufacturer: Stöber Umrichter 1070, Type: 1070 B, Serial number: 1119158/1292,

Manufacturer: Stöber Umrichter, Type: FDS 1030 B, Serial number: 67825, Serial number: 1163144,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/1, Serial number: 0193, Power Output: 1,5 KVA,

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 794, Systemconfiguration: 1167218,

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 1167218/794,

Manufacturer: Stöber Frequenzumrichter, Type: 1040B, Serial number: 1108181/992, Power Output: 4kVA,

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Manufacturer: Num Güttinger, Type: 1060 W, Seriennummer: 134457, war verbaut inMaschine: BP 195, Zustand: gut, Standort 32469 Petershagen: yes, FREE TEXT: Verfügbar sofort,

Manufacturer: Haffner , Type: SL 100, Year: ca.1980, Work piece width min-max mm: 550-1050, Face plate aggregate: yes, Key hole boring aggregate: yes, Clamping hight max. mm: 1050, Trench deepth max mm: 150, Trench lenght max mm: 315, Vertikal spindles: 1, Horizontal spindles: 1, Milling chain motor Kw: ca.1,0, Milling widths stop system: 315, Total power kW: 1,5, Lifting device: Pneumatisch, Year :ca.1980

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1, Frequenzumrichter: yes, Motor: MAC 112C-ED-HC, Current (A): 100/100,

Manufacturer: Indramat, Type: MOD 3/1 X 003-334<CRLF>KDS 1.1 100-300-W1/220, Produktionsnummer: 237-787 B 12.065, Frequenzumrichter: yes,

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Modell: 3/1x110-006, Seriennummer: 02758, Current (A): 100/25, Operating rpm: 3500/Ma0.025V/8, Gebraucht: yes,

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1-220, Seriennummer: Mod 9/11008-140, war verbaut inMaschine: IMA,

REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)