wf 10 used for sale

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, pipe silencer, silencer -Ventilation duct: Pipe silencer with spiral slit -Connection diameter: 100mm -Dimensions: Ø 210 x 675 mm -Weight: 3.3 kg

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible.

Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.

Press brake manufactured in 2018. This IBETAMAC 3200 100T features a pressing force of 100 t and a bending length of 3,200 mm. It includes controlled axes for X and Y, along with safety equipment such as additional side safety lasers. The machine is practically unused, fully functional, and available for testing. If you are looking to get high-quality bending capabilities, consider the IBETAMAC 3200 100T machine we have for sale. Contact us for further details.

Press brake manufactured in 1997. This IMAL E3A 100/33 features a press force of 100 tonnes and a bending length of 3,300 mm. With a motor power of 11 kW and a machine weight of 9,700 kg, it is designed for robust performance. If you are looking to get high-quality bending capabilities, consider the IMAL E3A 100/33 machine we have for sale. Contact us for further details.

Diesel Fuel Tank 1000 Liter, 1.000 Liter Tank, KIWA Certified; Gross weight [kg]: 540

Key data: 250 °C

Manufacturer: David + Baader, Kandel Type: 10880.3 Machine Type: Industrial Furnace/Chamber Furnace/Heat Treatment Furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories and workshops and is ideal for heat treatment, drying or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Type: Electric chamber furnace Condition: Used Further technical data on request or according to the nameplate Features and benefits Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Suitable for continuous operation Proven German quality Possible areas of application Heat treatment of metal parts Annealing and tempering work Drying processes Laboratory and testing ...

Round brush, grinding wheel, chip brush, wire brush -Round brush: Steel wire brush, 268 pieces -Outer diameter: 100 mm -Width: 22 mm -Bore diameter: 27 mm -Submission/Price: complete -Weight: 0.2 kg/piece

MOSSINI PDM/4B 1000T mechanical press was built in 2009 in Italy by Mossini SpA. The machine is designed for the precision blanking, stamping and forming of large-size components. The combination of high press force and wide machining capabilities makes the press ideal for the mass production of components used, among others, in the automotive and machinery industries. The MOSSINI PDM/4B 1000 is distinguished by its high press force of 1000 tonnes. Its drive system is based on a flywheel and an eccentric gearbox, which cooperate with four connecting rods. This solution enables uniform torque transmission and smooth control of the slider movement. Tools are positioned on the work table with centring pins and fixed with clamps, whilst they are fixed to the slider with bolts. The work table can be moved outside the press’s work area to carry out the assembly or disassembly of tooling,  ...

Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.

This 3-axis DMG DECKEL MAHO DMC 104V linear was manufactured in 2006. It features an X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust table size of 1250 x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 104V linear vertical machining centre we have for sale. Contact us for further details.

Forming and/or portioning machine for a wide variety of malleable masses This machine can be used to produce products in an infinite number of individual shapes with a flat bottom. We used the machine to portion our date chocolates. - Tabletop device – compact and space-saving - For small to medium production capacities - Fully automatic operation - Easy tool change and quick cleaning - Cost-effective forming rollers can be ordered TECHNICAL DATA: - Year of construction: 2021 - Condition: very good (Nov. 2025 fully serviced) - Dimensions (L×W×H): 750 mm × 550 mm × 940 mm - Weight: approx. 81 kg - 85 kg - Working width: 95 mm - Voltage: 230 V / 50–60 Hz / 16 A - Drive power: 0.5 kW - Control voltage: 24 V/DC PERFORMANCE (calculated with marzipan mass) – Volume (m³/h): 0.113 – Mass (kg/h): 128 – Number of units (pcs/h): 7,066 (bar: 80/20/1 ...

This 3-axis DECKEL MAHO DMC 1035 V was manufactured in 2007. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool changer that holds 20 positions and operates at a spindle speed of 20–8,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 V vertical machining centre we have for sale. Contact us for further details.

NUM 1020 T 131352 CNC control

D.Electron DE 1078

D.Electron DE 1082

D.Electron DE 1082

Baldor PSM 150-100-x

Bosch PSS 2034.0 A 052713-109

Prometec process monitor system 100

Cybelec NVM 101

Cybelec NSP 102

Cybelec NOT 102

Cybelec NIN 101

Cybelec NAX-103

Reflow soldering system Centurion 1040N Dimensions: 6,280 mm x 1,600 mm x 1,420 mm Weight approx. 2,500 kg 10 heating zones, length 3,550 mm 4 cooling zones, length 1,420 mm, with connection to domestic water cooling or chiller Year of construction 2022, first installation 12/2022, operation in line 10 months Additional Frequency Inverter Peak Bottom Pin Chain Transport PCB support throughout with tabs Automatic width adjustment and chain lubrication Transport direction from right to left Full nitrogen system incl. control Process gas cleaning CATHOX-ULTRA, full equipment SMEMA interface Process Data Acquisition Extensive special equipment Maintenance and much more

Manufacturer: YANCHENG Model: XYJ-3/100 Year of Manufacture: 2016 Type of Machine: stamping machine press Capacity: 100T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 2 - Width 2 - Height 1.6 (cm or m) - Weight 1000 kg - Power 11 (Kw or KVA, ) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: YANCHENG Model: XYJ-3/100 Year of Manufacture: 2017 Type of Machine: stamping machine press Capacity: 100T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 2 - Width 2 - Height 1.6 (cm or m) - Weight 1000 kg - Power 11 (Kw or KVA, ) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Model: 420-1000 CX Year of Manufacture: 2016 Type of Machine: Injection moulding machine Capacity: 420T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 7 - Height 2 (cm or m) - Weight 25500 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3; Compressed air 7 (bar or psi) - Cooling or heating - water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 650-1000-750 CX Z Year of Manufacture: 2017 Type of Machine: Injection moulding machine Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m) - Weight 35000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 650-1000-750 GX Z Year of Manufacture: 2018 Type of Machine: Injection moulding machine Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m) - Weight 32000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 1000-2000-1400 MX W Year of Manufacture: 2018 Type of Machine: Injection moulding machine Capacity: 1000T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 4, Width 10, Height 3.5 (cm or m) - Weight 40000 kg - Voltage 480 Volts - Current 500 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Magnification: 10×/40×, eyepieces: W 10×/20, free working distance: 92mm, field of view at 10×/40×: 20mm/5mm, illumination: integrated reflected light and transmitted light, mixed-light operation possible. Machine dimensions X/Y/Z: approx. 230mm/300mm/350mm, microscope body weight: approx. 1.5kg, stand weight: approx. 3.5kg. An on-site inspection is possible.

This 3-axis Matsuura Vplus 1000/40 was manufactured in 2005. It features a travel range of 1020 mm in the X-axis, 550 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a table size of 1150 x 550 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Matsuura Vplus 1000/40 vertical machining centre we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details.

Manufacturer: General Inspection (Gi) Model / Machine Type: DT-100 Date of Manufacture: 10/2018 Find more here - .ucymachines/ Contact us at - sales@ucymachines

The STUDER Internal Grinding Spindle Type 102560B 60,000 rpm is available for sale as a kit with accessories and tools as shown in the photographs. The set includes: STUDER Internal Grinding Spindle Type 102560B Different wheel chucks / accessories for internal grinding Tools and wrenches for assembly and adjustment Support and auxiliary elements Wooden box for storage and transport Condition: Used, from industrial machinery. Ideal set as a spare part or equipment for compatible STUDER grinding machines. The complete kit shown in the photographs is sold. For more information, price, measurements, compatibility or shipping conditions, please do not hesitate to contact us. Available for domestic and international shipping.

Sahinler RM 1050 x 3 mm Number of rolls: 3 rolls Roll capacity cold: 1050 x 3 mm Roll dia upside: 90 mm Power needed: 1,1 kW Length: 1630 mm Depth: 700 mm Hight: 1200 mm Weight: 480 kg

Motorized vertical test bench IMADA MV-100BA., Dynanometer Chatillon:, 100 x .05 Lb, 50 x 05 Kg, 500 x .5 N

This 3-axis FAMUP MCX 1000 vertical machining centre was manufactured in 1997. It features a longitudinal travel of 1,100 mm, transverse travel of 480 mm, and vertical travel of 470 mm. The machine includes a tool magazine capacity of 30 positions and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the FAMUP MCX 1000 vertical machining centre we have for sale. Contact us for further details.