wf 10 used for sale

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: DZ25L38/100 GEHV -Piston rod: Ø 25 mm -Holes: Ø 20 mm / Distance: retracted 277 mm -Dimensions: 340/60/H100 mm -Weight: 4.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: unfortunately without type designation -Piston rod: Ø 16 mm -Holes: Ø 10 mm / Distance: retracted 220 mm -Dimensions: Ø 35 x 248 mm -Weight: 1.3 kg

Model V 1000 Machine no. HO 1026 Center height over flat web 500 mm Circumferential diameter over bed 1,000 mm Bed length 6,200 mm Turning length 4,000 mm Spindle bore 104 mm Face plate diameter 900 mm Max. workpiece weight between tips 5,000 kg Max. workpiece weight with 1 setting stick 6,000 kg max. workpiece weight with 2 stacks 7,100 kg incl. documentation

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 6-groove pulley -Art.No.: 168-06-00041000 -V-belt width: 13 mm -Mounting: Ø 38 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 105 x 95 mm -Weight: 3.6 kg/piece

three-phase motor, electric motor -Manufacturer: ADDA, electric motor type 100LB-4 -Power: 3 kW -Speed: 1400 rpm -Shaft: Ø 28 x 60 mm -Design: B3/B14 -Protection class: IP 55 -Dimensions: 360/200/H250 mm -Weight: 22.6 kg

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Distribution belt / Deserting system For splitting a shingle stream into two processing lines Condition: overhauled, serviced, fully functional, ready for use

Knurled screw handwheel -Knurled screw: handwheel -Length: 100 to 163 mm -Thread: trapezoidal thread see photos -Dimensions: Ø 72 x 100 mm -Weight: 2.7 kg

Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

for sale YALE Mid-Stroke Order Picker Model MO10EAC Gripping height up to 3 meters Load capacity 1000 kg Platform lifting height up to 1.2 m Fork length 1150 mm incl. battery and charger Total weight approx. 1775 kg further models and inquiries to FSA Maschinen AG

Key data: 10000 , 3950 , 2500

Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.

HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width optionally as an open 3- or 7-blade rotor Drive motor 110 kw Folding device with electric winch

Flat Conveyor Belt FK 100 Width: 300 mm Length 2500 mm

Laboratory mixer Papenmeier, 3l and 10l pot available

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

Steel holder, clamping plate with T-slot, wedge holder -Steel holder: wedge holder -Shot size: 50 - 60 x 23 x 100 mm -Dimensions: 175/165/H215 mm -Weight: 12.3 kg

ALDURO Combination Belt Grinder BS-100+ Specifications: Motor voltage 400 volts Motor power 0.7 kW Sanding belt size 100x1000 mm Grinding wheel dimension DxWxID 200x25x20 mm Speed 2850 min- Sanding belt speed 15 m/sec. Dimensions WxDxH 550x310x580 mm Weight approx. 29 kg Connection suction Ø 36 mm Shaft extension Buffing disc Grinding wheel Abrasive belt

x-travel: 1000 mm y-travel: 380 mm z-travel: 430 mm total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2 m No. 4471 Universal milling machine IBERIMEX U 1000 Working area: 1000 x 540 x 430 Drive: 5.5 kW Control: Visulesta 4 digital display Table clamping surface 1500 x 360 mm documentation Spindle holder ISO 50 Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3239.100 -Fan: 230 V 19 W -Dimensions: 205/205/H110 mm -Weight: 0.9 kg

Micrometer screws, micrometer screws, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -Locking device -other sizes: also available -Case dimensions: 320/180/H40 mm -Weight: 0.9 kg

Offer 24315 Univ. Radii Metal Belt Grinding Machine Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Contact disc / grinding roller Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact - sanding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck holder MK4 -Chuck size: Ø 100 mm -Passage: Ø 20 mm -Dimensions: Ø 100 x 200 mm -Weight: 3.8 kg

Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/100/H105 mm -Weight: 7.7 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Revolving center: Mounting: MK4 -Type: unfortunately without type designation -Centering tip: Ø 100 mm -Dimensions: Ø 100 x 230 mm -Weight: 5.2 kg

Gas boiler for sale inklusive Weishaubt gas burner panel gas string and soundbox Price 3500 euro loaded on truck

max. wheel diameter: 120 mm gear width: 130 mm max. module: 2 no. of teeth to be hobbed: 6-325 Z min/max. spiral pitch: 20-5000 mm hobbing length: 130 mm weight of the machine ca.: 860 kg Universal hobbing machine MIKRON 102.05 MPS > External surface gearing Technical Data Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030/800/1520 mm Weight of the machine: 880 kg Colour of the machine: black The data for this ad was created with ModulMWS - the softwa ...

Radial drill CSEPEL RFH 100/3000 without cubes

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller -Load capacity: kg -Dimensions: 210/100/H65 mm -Weight: 5 kg -only 1 piece available

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

Vernier caliper, caliper, vernier caliper -Caliper: Vernier caliper with fine adjustment -Measuring range: 0-1000 mm -Measuring accuracy: 0.1 mm -Dimensions: 1180/225/H15 mm -Weight: 2.5 kg

Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

For inserting eyelets into pre-perforated material such as cardboard, cardboard, plastic, etc. -Automatic eyelet machine with maintenance-free brake motor drive -Automatic eyelet feed to the upper tool -The eyelet pressure can be adjusted according to the thickness of the material -The trigger is done with a foot pedal. Machine is in good condition

Transnorm angled-belt conveyor 45° 1500-1250-1000 RA1850 Exhibit Make: Transnorm Year of manufacture: 2018 Inlet angle: 45 Length center: 1500 mm Belt width (RB): 1000 mm Frame height: 270 mm Nominal/external width (NB): 1250 mm Conveying speed: 0.717 mm V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports Construction year: 2018 angle: 45° KW: 1,5/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Conveying length in mm (NL): 1500 Frame width in mm (NB): 1250 Belt width in mm (GuB): 1000 Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Movi-Mot For individual ...

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-1000 PPV-A -Stroke: 1000 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -max. pressure: 12 bar -Dimensions: 1190/80/H110 mm -Weight: 10.2 kg

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type SPA Ø 102 mm -V-belt width: 13 mm -Mounting: Ø22 x 52 mm -Dimensions: Ø102 x 55 mm -Weight: 1.8 kg

Capacity: 3.100 Ltr. Operating pressure: 4.5 bar, with test book Year of Make: 1976 Manuf.: Wabag Material: Stainless Steel, 1.4571, V4A Design: Cylindrical sthd, on 3 feet, spout with ball valve DN 25, lateral weld-on nozzle DN 65, various connections inch threads, manhole cover, slight adhesions inside and outside last use: water Height approx. 3,300 mm (with cleaning line) Diameter: approx. 1,150 mm

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type 100A Ø 106 mm -V-belt width: 13 mm -Material: aluminum with steel insert, see photos -Mounting: Ø24 x 45 mm -Dimensions: Ø106 x 45 mm -Weight: 0.8 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: Jung, machine spindle -Type: MP 10z -Speed: max rpm -Recording: Dimensions see photos -Dimensions total: 545/210/120 mm -Weight: 23.5 kg

Key data: 78 KW, 97 kVA, 400 V

Diesel Emergency Power Generator 100kVA, 4 Cylinder EU StageV Engine: Deutz TCD4.1L4 Generator: Stamford UCI274C Frequency: 50Hz Voltage: 400/230V Tank: 188l Power PRP (kVA / kW) 97/78 Power ESP (kVA / kW) 107/86 Noise Level Lp(A) (dB(A)@7m): 67 Sound power-LW(A) (dB(A)): 95 Control: DSE 7420 MKII Fuel filler neck with key Tropical-proof cooler for operation at 50 ºC. Prepared for maintenance intervals every 500 hours Emergency stop button Differential protection Central stop eye Access door to the radiator

Interface, data acquisition device, test device, telemetry system, probe interface -Manufacturer: Renishaw, Probe Interface from coordinate measuring machine Stiefelmayer C 100 413514 -Type: PI 200 -Dimensions: 185/140/H90 mm -Weight: 1.5 kg

Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE  ...

Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in mm (N ...

Interface, data acquisition device, test device, telemetry system, probe interface, laser measuring system -Manufacturer: Renishaw, laser measuring system from measuring machine Stiefelmayer C 100 413514 -Type: RGH22 D07S06 -Dimensions: 130/90/H45 mm -Weight: 0.2 kg