wf 10 used for sale

Treif Felix 100-CE dicing and strip cutting machine Performance max. 0.8 t/h Including one grid set for cubes (consisting of two single grids) Including cutting knife Max. cutting-off length 0.5-32 mm Click & go quick change gridset system Refurbished condition

number of heads: 2 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 20 mm serial no.: 26332 voltage: 280/220 V Dimensions (L/W/H): 80x120x170 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control unit from Bierrebi TA 103 automatic cutting machine -Dimensions: 435/220/H90 mm -Weight: 1.6 kg

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of feeders: 6 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control module from Bierrebi TA 103 automatic cutting machine -Circuit board: Type 2.028.01.063.02 -Dimensions: 460/150/H65 mm -Weight: 2.7 kg

serial no.: 9174 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm -Weight: 3 kg

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gebr. Slotted cutter for tenon cutters Carpentry joinery machine such as KRÜSI ZA-66 or REX ZA 800 SATURN 5.109 Tool diameter: 450 Tool height: 31-60 mm Aluminum From location. No shipping!

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, press cylinder -Manufacturer: Hänchen, hydraulic cylinder type 120 10100-01 -Piston: Ø 60 mm -Piston rod: Ø 30 mm / M24 x 1.5 -Stroke: 50 mm -Max. pressure: 150 bar -Dimensions: Ø 95/270 mm -Weight: 9 kg

Alexanderwerk WRN 100 Planetary Agitator  High-performance stirring and beating machines for professional use. With 100 litre mixing bowl, plastic protective screen • Stirring, beating and kneading of doughs, meat and frothy masses • Stirred tank capacity 100 liters volume • Fixed protective shield made of plastic  • 400 V, 50 Hz • incl. stirrer, broom and dough hook Application Kneading, mixing, stirring, beating More items new and used - can be found in our shop! International shipping costs on request!

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Manufacturer: DEC, ventilation hose, original packaging -Type: Greydec 100 - 152mm x 6 meters -ART.code: DG1152/6 -Cardboard dimensions: 400/175/H175 mm -Weight: 1.7 kg

Combination with the Intermac CNC Crease Grinder Groove 1500 (no. 23020) - Serial Number: 90147 Weight: 200 kg Power: 0,8 Kw + internal extraction Length mm: 900 Width mm: 1000 Height mm: 1700 Working height: 1200 Transport size L x W x H: 0,9 x 1,0 x 1,7 Number of spindles: 1 spindle Condition machine : Good Control type: Manually Electric. Connection: 16A 3P+N+PE - For more information, please mail us: salestecfort.nl

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: tmg, temperature sensor type VH54.9i301 -Item No.: 1012919 -Measuring range: -40 to 50°C -Number: 3x temperature sensors available -Price per piece -Dimension: 263/136/83mm -Weight: 0.6 kg/pc.

mechanically switchable clutch, releaseable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, coupling type 100110405 35-12 -Translation: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm -Dimensions: 405/212/H213 mm -Weight: 41 kg

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

Transnorm conveyor belt GF 10800-600-500 RA2177 Technical data: Conveyor length (NL): 10800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 10800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Connecting Rod With New Bushing And Used Immediately Available

CINCINNATI ARROW 2 1000 CNC WITH LOW HOURS WE OFFER AN NICE CONDITION VERTICAL MACHINING CENTRE YEAR 2003 WITH EQUIPMENT CONTROLS: GE-FANUC SERIES 18I-M CONTROL Table: 1,120 x 610mm TRAVELS: X : 1,020mm, Y : 510mm, Z: 560mm. Rapid Traverse : XYZ=24m/min. Maximum Cutting Feed : 15m/min. Maximum Spindle Speed: 8,000rpm. Spindle Taper BT40. 20 Position ATC. MACHINE WILL BE AWAILIBLE FROM BEGINING FEBRUARY 2024

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt -Conveyor belt: link belt stainless steel -Width: 1000 mm -Length: 2890 mm -Thickness: 4 mm -Transport dimensions: Ø 122 x 1000 mm -Weight: 32.7 kg

-extendable spiral mixer Kemper ST 100 A -with 2 automatic timers -with flour dust cover -Boiler right left-hand rotation - Stainless steel spiral and guide rod -with 2 stainless steel boilers -per cauldron for max. 100kg flour or for max. 160kg dough -Boiler manual locking -Machine is equipped with 2 new timers

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Control: Max.travel range: X 800 mm Y 850 mm Z 500 mm Wave length:1,06 um Average power:100 Watt Max. peak pulse power:9 kW Laser crystal:Nd:YAG Made in Germany

Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measuring technology, contact manometer -Manufacturer: Wika, Manometer Pressure gauge with contact device -Type: 233.50.100 Kont 821.1 16 bar -Screw connection: see photos -Dimensions: 160/130/H120 mm -Weight: 1.3 kg

Pressure gauge, flow meter, measurement and control technology, flow meter liquid -Manufacturer: SKT, flow meter for liquid / water -Measuring range: 100 to 1000 l/h -Accuracy class: 4 -Connection: DN 25 -Pmax: 10 bars -Dimensions: 60/60/H390 mm -Weight: 0.8 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diametr: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l p

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany

Moving bezel, bezel, setting stick, lynette -Bezel: riding along -Peak height: 100 mm -Edition: Brass -Technical drawing: see photos -Dimensions: 180/30/H245 mm -Weight: 2.5 kg

Control box, control unit, pneumatic control -Manufacturer: Festo, pneumatic control system 1000 -Control no.: 3051 9 -Inlet pressure: max. 14 bar -Operating pressure: 4 - 6 bar -Dimension: 490/410/H945 mm -Weight: 56 kg

Hydraulic press, oil hydraulic press, shear press -Manufacturer: Santenberg, hydraulic shear press -Hydraulic unit: HyPneu 0.75 kW / 100 bar -Individual components: see photos -Dimensions: 1190/910/H1670 mm -Weight: 262 kg

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diameter: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l

Gurutzpe Super AT lathe. Distance between centers: 4000mm. Swing: 1020mm. Swing over carriage: 710mm. Swing in gap: 1320mm. Bore: 76,5mm. Motorized carriage. 4 independent jaws chuck. DRO Heidenhain.

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs -Length: 1000 mm -Width: 1000 mm -Sheet thickness: 30 mm -Dimensions: 1000/1000/H260 mm -Weight: 402 kg

Pneumatic grease gun, compressed air grease gun, grease pump -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm -Overall dimensions: Ø 606 x H1020 mm -Weight: 63 kg

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, manometer -Type: 0 to 100 mbar -Screw connection: see photos -Number: 1x manometer available -Price per piece -Dimension: 140/100/50mm -Weight: 0.5 kg/pcs

USED TETRA PAK A3 FLEX 1000ML PRISMA FILLING LINE FOR SALE Item #: Usm-193 Category Tetra Pak A3 CF/Flex A3 Flex 250ml Slim and 1000ml Prisma Filling Line For Sale A3 Flex 250ml Slim filling machine with 1000ml Prisma Volume change kit, Version 100v, Speed 7000 PPH Straw applicator TSA 21 Cap applicator 45 for stream cap Tetra Pak packer TCBP 70 Tetra Film wrapper 67 eady ride and conveyors paper trolly Condition: Good

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: Bernstain, Foot switch type F1-U1 UN -Voltage: 10A 500V-AC IP65 -Connector: 6-pin -Metal housing: with protective cover -Overall dimensions: 280/150/H760 mm -Weight: 3.3 kg

Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation damper: louvered louvre damper -Type: 9 adjustable slats -Material: aluminum -Total dimensions: 445/100/H330 mm -Weight: 2.6 kg

Autoplate (semi automatic plate loader) Ink unit temperature control (Technotrans Beta C) Cooling and recirculation Alcolor continuous dampening Ink-roller washing device - automatic Blanket washing device - automatic Powder sprayer (WEKO AP 110) Preset Plus feeder Prinect Press Center AirStar Pro - Central air supply cabinet