wf 10 used for sale

John Deere tractor ready to drive Type UTC102LS Year of construction: 1993 Perkins Engine 46446

bore capacity in steel (diameter): 40 mm arm length: 1.000 mm workpiece height max.: 1.250 mm table-size: 1.150 x 690 mm spindle taper MT: 4 spindle turning speed range: 40 - 1.400 U/min feed range: 0,08 - 0,40 mm/min crossrail adjustment horizontal: 800 mm crossrail adjustment vertical: 700 mm spindle stroke: 220 mm power requirement: 3,5 kW coolant: voltage: 380 V total power requirement: 4,0 kW weight of the machine ca.: 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cast iron bed 1305 x 800 x 100 mm - No 1 Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 510 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 945 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection class: IP 54 -Dimensions: 330/213/H225 mm -Weight: 25 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 40 mm -Piston rod: Ø 19 mm -Stroke: 105 mm - Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 390/90/H55 mm -Weight: 2.7 kg

Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 100 mm -Piston rod: Ø 45 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 480/145/H130 mm -Weight: 19 kg

Stop magnet, pull magnet, opening magnet, stop magnet, locking unit -Manufacturer: Thomas/Sauer gear -Type: 82-5650-106700 -for: Sauer gear -Type: WE10J402F1E0D220 -Connection: 220 volts -Stroke: 12 mm -Number: 1x available -Price: per piece -Dimensions: 115/210/H145 mm -Weight: 7 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from: a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg

Autobond Mini 105 TPHES - thermal laminator year 2008 2 sided Max. sheet size: 106 x 106 cm (41.73" x 41.73") min. sheet size: 28.5 cm x 32 cm (11.5" x 12.5") Max. speed: 60 m/min (200 ft/min) 115 gsm to 650 gsm Heidelberg Speedmaster feed head Good Condition

Swivel rotary table Ø 1000 mm Shelf diameter: Ø 1000 mm x height 650 mm Rotation at 360° Vertical swivel Weight: approx 650 kg

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate, straightening bench ... -Number: 1 prism available -Dimensions: 100/120/H60 mm -Weight: 5 kg

Radial piston motor, hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 34 mm -Flange: Ø 180 mm - Universally applicable: -Number: 1x motor available -Price: per piece -Dimensions: Ø 205/258 mm -Weight: 23 kg/piece

clamping plate, welding table, welding table, surface plate -Clamping plate: is steel -Width: 1000 mm -Length: 1000 mm -Height: 820 mm -Plate thickness: 50 mm -Plate is on: steel frame -Quantity: 1 piece available -Transport dimensions: 1000/1000/H820 mm -Weight: 466 kg

Machine condition: cleaned and tested Year of construction: 2013 Main motor incl. Mentor control suitable for KBA RA 106 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: 90 mm -Dimensions: 105/110/H68 mm -Weight: 3.1 kg

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Machine vise, sturdy vise, drill vise -Span width: 100 mm -Jaw width: 135 mm -Back height: 40 mm -Dimensions: 400/310/H130 mm -Weight: 34 kg

Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition

Capacity/ ◆1000kgs. Raise/ ◆85-800mm. Fork width/ ◆550/685mm. Fork length/ ◆1150. Wheel/ ◆Nylon / PU wheels Wear parts can be reordered from us!

Capacity/ ◆ 1000/1500 kg Raise/ ◆ 85-800 mm Fork width / ◆ 550/685 mm Fork length / 1150 Battery/ ◆ 12V60Ah battery Wheel/ ◆ Nylon/PU wheels Wear parts can be reordered from us!

Gearbox, spur gear, angle gear, reduction gear -Reversing gearbox -Translation: 2 :1 -Drive shaft pulley: 17 mm Ø 105/145/185 mm -Output shaft pulley: 13 mm Ø 120 mm -Dimensions: 540/190/H210 mm -Weight: 28.8 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Power: -Input: 3x 400 V - 50/60 Hz -Output: Hertz 0-150 Hz max. 4 kVA -Dimensions: 400/100/H265 mm -Weight: 7.6 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Hydraulic lift table 1000 Kg Height from 85 mm - 860 mm 150kg costs 120 euros more

We offer you here a used pallet rack stand of the manufacturer Mecalux. Technical data for the pallet rack stand: Shelving system: Mecalux Type: M-81 The scope of delivery includes: 01x Pallet racking stand, used Material color: blue Frame profile: 80 x 70 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 8,000 mm high 1,100 mm deep Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Refrigeration system from Vektor with 2 fans Year of manufacture : 1996 at the moment unfortunately no further information about the product

pressure: 100 t chamfer lenght: 2050 mm control: CYBELEC DNC 880S weight: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale : 1000ml SLIM conversion kit for A3flex machine. I send photos by email.

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

electric magnetic plate, chuck, magnetic chuck, magnetic chuck -Clamping surface: 1000 x 255 mm -Connection: 100 volts DC -Dimensions: 1000/255/H98 mm -Weight: 140 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

Technical data for the pallet rack beam: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack traverse, used Material color: orange Truss type: PNB085|1,5 Box profile: 125 x 50 mm Agraffe: 4 HK (hook) Clear width: 1,000 mm max. load per pair of trusses 1,500 kg, at the same time. distributed load 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting

Lens, lenses -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Precision bending beam for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS S100-5N -Type: NJ Y123/101 -Weight: 0.1 kg

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,000 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 7,17 kg Internal designation: RW-3

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized Total length: approx. 1,010 mm Stand depth: approx. 1,000 mm Clear span: approx. 895 mm Profile dimensions: C: 75 x 45 x 18 mm Technical data for the Tiefensteg: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) Truss support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pcs.

Turbomixer: 1.000 L. Brand: Papenmeier, 2-speed engine: 150/190 Kw. at 1500 and 3000 rpm

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Bezel, stick, lynette -Max. Passage: Ø 102 mm -Tip height: 144 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 270/70/H295 mm -Weight: 5.6 kg

Grinding mill with blades Brand: Folcieri, cutting chamber: 1000x350 mm, motor: 125 hp. Flywheel, vacuum cleaner, cyclone and big-bag support with feeding belt: 4.5x 0.75 m. With electrical panel.

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate, welding table, welding table, straightening plate -Width: 710 mm -Length: 1010 mm -Height: 840 mm -Surface: milled -partially with threaded holes -Sheet thickness: 65 mm -Massive -Weight: 410 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1000 mm -Height: 780 mm -Surface: milled -partly with threaded holes -Plate thickness: 25 mm -with supporting ribs -Weight: 214 kg

Clamping plate, welding table, welding table, straightening plate -Width: 995 mm -Length: 1000 mm -Height: 800 mm -with supporting ribs -Weight: 170 kg

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4000 x 2000mm 10000w / 10KW FIBER laser