wf 10 used for sale

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: 90 mm -Dimensions: 105/110/H68 mm -Weight: 3.1 kg

Machine vise, sturdy vise, drill vise -Span width: 100 mm -Jaw width: 135 mm -Back height: 40 mm -Dimensions: 400/310/H130 mm -Weight: 34 kg

Gearbox, spur gear, angle gear, reduction gear -Reversing gearbox -Translation: 2 :1 -Drive shaft pulley: 17 mm Ø 105/145/185 mm -Output shaft pulley: 13 mm Ø 120 mm -Dimensions: 540/190/H210 mm -Weight: 28.8 kg

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Power: -Input: 3x 400 V - 50/60 Hz -Output: Hertz 0-150 Hz max. 4 kVA -Dimensions: 400/100/H265 mm -Weight: 7.6 kg

Veneering press OMC PL 105 LC 30/13 Water Work surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature 85 degrees Control system logic contorl Machine control from touch panel readings Temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes Power 21KW CE Certificate Production 2023 Machine available on request New machine Net price

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Stock No.: 2107 1 used, partially overhauled and function-tested strand granulator with >> Granules Cutting Lengths Adjustment ( SV ) Manufacturer COMAC - Italy Type SG-100 SV Strand inlet width 100 mm cutting rotor width 110 mm, Parallel section rotor with 32 teeth Rotor Ø 200 mm >> strand pellet cutting length adjustment 2 drives: 1x for cutting rotor - 4 kW 1x for feed roller 1.5 kW with STOBER reduction gear Soundproof housing of the pelletizing chamber Visit / test run possible shortly by appointment. We also have matching strand cooling basins, strand blowers and classifying screens available from stock. Further strand granulators and other pelletizing systems/plants available from stock ( water ring - , hot impact and underwater pelletizing )

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Hydraulic press brake Manufacturer: MENGELE Type: A 100-2 Pressing pressure: 100t Stroke: 160mm electr. Connection: 400V 3Ph Year of construction: 1964 Condition: used and functional

electric magnetic plate, chuck, magnetic chuck, magnetic chuck -Clamping surface: 1000 x 255 mm -Connection: 100 volts DC -Dimensions: 1000/255/H98 mm -Weight: 140 kg

Key data: 1000 , 166 , 40

Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface

Capacity, ton 1000 Slider stroke, mm 400 Unattainable stroke, mm 12 Slider strokes, spm 20 Shut height, mm 730 Distance adjustment between table and slider, mm 200 Slider size, mm 1200 x 1200 Table size, mm 1250 x 1250 Table gap size, mm 800 x 800 Bolster plate thickness, mm 260 Pneumatic cushion capacity (eject), ton 40 Pneumatic cushion stroke, mm 160 Pneumatic cushion load, kg 4500 Main power drive, kW 75 Voltage, V 340 Machine dimensions, mm 4310 x 3820 x 6790 Machine weight, kg 77100

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

Lens, lenses -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Precision bending beam for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS S100-5N -Type: NJ Y123/101 -Weight: 0.1 kg

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Pressing force 1000 kN Table size 750 x 560 mm, diarrhoea opening 100 mm Installation height 800 mm, stroke 500 mm Projection 360 mm Bear size 530x400 mm, 2 T-slots Ram speed: down 200 mm/sec, up 400 mm/sec Connection load approx. 21 kW Incl. Feeder WE16 for 160 mm bandwidth Coil tray and straightening unit Fabr. OFFICE; Type CA200/R40-7, YOC 1994 Reel, loop control Two-hand operation Manuals

Bezel, stick, lynette -Max. Passage: Ø 102 mm -Tip height: 144 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 270/70/H295 mm -Weight: 5.6 kg

Clamping plate, welding table, welding table, straightening plate -Width: 710 mm -Length: 1010 mm -Height: 840 mm -Surface: milled -partially with threaded holes -Sheet thickness: 65 mm -Massive -Weight: 410 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1000 mm -Height: 780 mm -Surface: milled -partly with threaded holes -Plate thickness: 25 mm -with supporting ribs -Weight: 214 kg

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

Standard Equipment's Chrome Coated Cylinder Boiled Steel Body Pressure indicator Pressure Adjustment User guide 2 Years Warranty CE

Clamping plate, welding table, welding table, straightening plate -Width: 995 mm -Length: 1000 mm -Height: 800 mm -with supporting ribs -Weight: 170 kg

Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 100-125 mm -One revolution of the drum corresponds to: 0.5 mm -without locking device -large measuring areas -Measuring force: ratchet -Including case Setting mass -also other sizes available -Weight: 1.0 kg

Emergency generator set 100 kVA Volvo Penta / WA-V 100 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine type: TAD 531 GE Engine No.: in production Motor power: 102 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCI 274 C1 Gen.Nr.: N22B053121 Generator capacity: 100 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.150 Height approx. mm: 1.950 Length approx. mm: 3.000 Weight approx. KG: 1.920 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immed ...

Depth gauge, dial gauge, depth gauge, depth caliper, caliper, vernier caliper -Measuring range: 0-100 mm -Fine-tuning -long measuring jaws -Transport box -Dimensions: 365/180/H40 mm -Weight: 1.15 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -spindle tool -Recording: SK50 -suitable for tool changers -spindle dimension -Dimensions: 240/120/H320 mm -Weight: 10 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 6 l/min -Drive: 0.6 kW 1380 rpm -Dimensions: 410/250/H340 mm -Weight: 22 kg

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Clamping plate, welding table, welding table, straightening plate, straightening table -Width: 1000 mm -Length: 720 mm -Height: 200 mm -with supporting ribs -Plate thickness: mm -Weight: 486 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg

Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane -Payload: 1000 kg -Dimensions: 450/210/H90 mm -Own weight: 9 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Connection piston rod: M12x1.75 -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 45/H310 mm -Weight: 1.2 kg

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Air inlet and outlet: adjustable -Number: 1x available -Price: per piece -Dimensions: 95/95/H345 mm -Weight: 5 kg

Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

Integrated system with 3 Bitzer compressors 4PES-10Y-40P and switch box TK compound or normal cooling compound system. Price on request.

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Total length: 300 mm -Total length extended: 400 mm -Price: per piece -Number: 1x available -Dimensions: 95/95/H300 mm -Weight: 3.6 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 105 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 357 mm -Total length extended: 462 mm -Price: per piece -Number: 1x available -Dimensions: 96/96/H357 mm -Weight: 6.75 kg

Technical data for the compensating plate: Manufacturer: Bito (L) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.14 kg | Pcs.

Stock number: 3768 CNC PRESS BRAKE Manufacturer: DONEWELL, Type: 100 x 3000 Machine NO.: 588 12 2348, Year of construction: 1988 Specifications: Size bending length 3100 mm Size Printing capacity 100 tons Stroke length 215 mm Stand passage 2600 mm Projection 265 mm Bending speed 420 mm/min Hydraulic. CNC control Cybelec EURO III Fabr. Controlled in Y1-Y2-X Achen Program-controlled backgauge. X - 500 mm Accessories: Segment-split upper tool 3100 mm Multi bottom tool 3100 mm Operating manuals Length: 1300 mm, Height: 2450 mm, Width: 3100 mm, Weight: 7000 kg

Technical data for the compensating plate: Manufacturer: Bito (L) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.37 kg | Pcs.

Several used ARI 3 – way control valve with Belimo servomotor 24V DN 80 / PN 6

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-0140PPV -Piston: Ø 100 mm -Stroke: 140 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 138/H395 mm -Weight: 8.5 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 600 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Number: 2 pieces available -Price: per piece -Dimensions: 74/74/H835 mm -Weight: 5.4 kg

Technical data for the compensating plate: Manufacturer: Bito The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | Pcs.

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

Technical data for the compensating plate: Manufacturer: Bito The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | Pcs.