wf 10 used for sale

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 1167218/794,

Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310

Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.

Busch roots vacuum pump WV 1000 B with 3.0 KW AC-Motor, 1000 m3/h, final pressure: - 100 mbar, completely overhauled with all wearing parts, 1 year warranty

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1, Frequenzumrichter: yes, Motor: MAC 112C-ED-HC, Current (A): 100/100,

Manufacturer: Indramat, Type: MOD 3/1 X 003-334 KDS 1.1 100-300-W1/220, Produktionsnummer: 237-787 B 12.065, Frequenzumrichter: yes,

Scale with conveyor belt Brand Sartorius Built in 2006 Type: WM6FDP-1000Q Up to 6 kg Conveyor belt speed: 15-36 m/min Bandwidth: 300mm - Calculation and display of weight values (RS-232C) - 100 product storage - Fixed weight values in dynam. Operation - TCP | IP, RS-422 and RS-485 can be used via external cartridges

Leybold vacuum pump SV 100 B with 2.2 KW AC-motor, - 0.5 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Modell: 3/1x110-006, Seriennummer: 02758, Current (A): 100/25, Operating rpm: 3500/Ma0.025V/8, Gebraucht: yes,

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Storage Tank / Flat Bottom Tank with Outlet Discharge 20.100 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge year: 1983 manufacturer: Defrancheschi Measurements: Width: 1780 mm Depth: 3700 mm Height: 4000 mm weight: approx.. 1,5 tons

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1-220, Seriennummer: Mod 9/11008-140, war verbaut inMaschine: IMA,

all stainless steel twin shaft paddle mixer suitable for vacuum suitable for cooling capacity ± 1.500 L loading height ± 2.000 mm discharging height ± 750 mm double lid at the top 2 discharge guards dimensions : ± 2.300 x 2.000 x 2.400 mm

Oerlikon/Leybold roots vacuum pump WAU 1001 complete with 4.0 KW AC-motor, 1000 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty

Key data: 80 KW, 100 kVA, 400 V

MODEL: EQ-D10080 ENGINE: Deutz BF4M1013EC G2 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 100(kVA) / 80(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1600kg DIMENSIONS L/W/HEIGHT (MM): 280011501600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry wi ...

Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.

Key data: 100 KW, 125 kVA, 400 V

MODEL: EQ-D125100 ENGINE: Deutz BF4M1013FC FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 125(kVA) / 100(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1900kg DIMENSIONS L/W/HEIGHT (MM): 280011501600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry wit ...

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Wilo DL-E 100/145-11/2-S1 Dry Runner Double Pump Dry-running double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v), among other things. Design Electronically controlled dry rotor double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (according to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Features/Function Modes Δp-c for Constant Differential Pressure Δp-v for Variable Differential Pressure PID Control Actuator operation (n=constant) Hand control level Setting the differential pressure setpoint Setting the speed (manual operation) Setting the operating mode Pump ON/OFF adjustmen ...

This Rational Ultra Vent hood for Rational combi steamers, including connection kit, fits the combi steamers CMP, SCC 61/101 Electric from year of construction 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultra Vent hood is € 3,696 net. The price quoted is net, plus 19% VAT. Service: We will be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or mo ...

The vertical shelving system is a well-thought-out storage solution for the upright storage of long goods such as roof battens, strips, installation pipes or beams. It was specially developed for commercial as well as private use and offers a particularly space-saving alternative to classic horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or the self-service area in retail. The scope of delivery includes: 01x Vertical racking, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 2,360 mm Projection: approx. 500 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with a ...

Manufacturer: Grundfos Number: 1 Model: NB 100-200/181 A-F-A-GQQE Built: 2008 Rated flow current: 284.3 m3/h Nominal head: 33.4 m Speed: 2950 rpm Pressure: 16 bar Temperature range: 0-90 °C Power: 37 kW The pumps never went into operation after installation and therefore virtually unused. Technical specifications and data sheets are available and will be sent on request.

Control type: CNC Sinumerik 840D-SL x-way 1135 mm y-way 1050 mm z-way 750 mm table size 1400 x 1050 mm Table load 2500 kg max. workpiece size LxWxH 1400 x 1240 x 750 mm Speed 10000 rpm feed speeds X/Y/Z Axis 40000 mm/min Expressspeeds x/y/z 40000 mm/min Tool holder HSK-A100 HSK Number of places in the tool magazine 30 places max. tool weight 20 kg max. tool length 395 mm max. tool diameter 110 mm Machine height 3294 mm Drive power - spindle motor 44 kW machine weight approx. 17.9 t Space requirements approx. 15 m2 Information: Universal milling machine in mono BLOCK design (3-axis) - available September 2019 - only 3800 spindle hours, 13400 power-on hours Equipment / Accessories: - Coolant system - High-pressure pump - Chip conveyor - Hand-held panel - BALLUFF option - Documentation

Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order

electric box lifting device, lift lift Brand: KLB Type: Lifter 1000 Built: 2013 Load capacity: 2000N, approx. 200kg maximum lifting height: 102 cm Crate dimensions: 62 x 62 cm Trolley with spindle drive Forks to hang in Cable for power supply Control panel with cable This item is only sold to traders. All information without guarantee

This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, built in 2023. For the following Index series: Index H and I can also be used for DUO devices or individual devices. This hood not only binds escaping fumes, but also eliminates odors and smoke. You don't need an exhaust air path to the outside. An LED lamp automatically shows you when you need to change the filter. This version has stainless steel lamella filters, as well as a pre-filter mat behind it. In this way, the activated carbon filter, which is located in the hood as the centerpiece, is protected from too rapid contamination and offers optimal functionality. This Plus condensation hood can be used optimally in the front area, in closed rooms or for show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be retrofitted without much effort. The hood has been checked in our i ...

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, built in 2024. For the following Index series: Index H and I can also be used for DUO devices or individual devices. This hood not only binds escaping fumes, but also eliminates odors and smoke. You don't need an exhaust air path to the outside. An LED lamp automatically shows you when you need to change the filter. This version has stainless steel lamella filters, as well as a pre-filter mat behind it. For example, the activated carbon filter (newly installed) located in the hood as the heart is protected from too fast contamination and offers optimal functionality. This Plus condensation hood can be used optimally in the front area, in closed rooms or for show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be retrofitted without much effort. The hood has been checked in our i ...

GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...

Key data: 80 KW, 100 kVA, 230 V

Made in the EU 30 months warranty On hand! Only 2 pieces available Power Generator Specifications: Model No.: EQ-I10080 Prime Rating: 100 kVA / 80 kW Standby Rating: 109 kVA / 87 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45TM2A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight: 1422 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...

Vessel for Melting Manufacturer BINDER 1000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available (from 2008)!

7 pcs of clamping cubes 1000x750x400mm pirce 800eur/pc

GEMA GP 100 semi-automatic pallet wrapping machine was built in 2012 in Poland by GEMA sp. z o. o. This highly efficient machine is an indispensable tool in various types of warehouses and logistics centres. This is because it makes it possible to wrap loads with a maximum weight of 1500 kg in stretch film, increasing their safety and stability during transport. The process is performed by the machine semi-automatically. The GEMA pallet wrapping machine weighs 500 kg. We have two of these machines for sale. The price included in this advertisement is for one unit. Technical specifications of the GEMA GP 100 stretch wrapping machine General data - maximum wrapping height: 2200 mm - maximum load diagonal: 1650 mm - maximum load weight: 1500 kg - capacity (15 wraps per pallet and a pallet change time of 30 s): 30 pallets/h - rotary table height: 70 mm - rotary table positioning ...

The diesel forklift with a load capacity of 10.0 tons (10,000 kg, 22,046 lbs) has been specially developed for the transport of particularly heavy loads. Equipped with a modern Cummins diesel engine, hydrostatic steering, pneumatic tires and a closed hydraulic system, it offers the highest performance and efficiency. For special requirements, we also have electric forklifts for zero-emission solutions, gas forklifts for versatile applications and four-wheel forklifts that are great for difficult off-road conditions. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 10,000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 175 x 80 mm - Total weight: 12,900 kg  ...

Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg

Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293

cutting effort 1000t the number of strokes (no load) 17 /min course a support of the blades 140mm Max. cutting diameter of rounded workpiece, mm 190 Max. cutting diameter of squared workpiece, mm 180 for 450 N/mm2. Machine weight, kg 60000

Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.

Used machine with 110 KW as a retro-fit machine We are also happy to work on your Stephan machine as in the pictures in the appendix as retro-fit

Key Features & Specifications of Nissan Muffler (550x170x150mm) ✔️ Product Overview: The Nissan Muffler is an essential component of the exhaust system, designed to reduce noise, improve engine efficiency, and manage emissions. It ensures optimal vehicle performance by directing and filtering exhaust gases. ✔️ Key Specifications: Type: Exhaust Muffler / Silencer Compatible Vehicle: Nissan (specific model compatibility may vary) Dimensions: 550mm (Length) × 170mm (Width) × 150mm (Height) Material: Stainless Steel / Aluminized Steel (depends on variant) Weight: Approx. 4-6 kg (varies by design) Inlet/Outlet Diameter: Standard sizes, typically between 40-70mm (check model-specific details) Function: Reduces exhaust noise, directs emissions, and enhances engine efficiency Durability: Rust-resistant and corrosion-resistant for extended lifespan Installation: Direct-fit ...

CNC monitor and keyboard NUM CNC (760-1040) top condition Visible in our warehouse in Gussago BS. Mimu Machine Tools

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes

Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.

For sale is a fully automatic cleaning and disinfection system of the type Expert 100 / T from the manufacturer Melksysteme Niedersachsen (NISA). The system is ideal for daily cleaning of milking equipment and milk lines on farms. It takes over all dishwashing, disinfection and control functions fully automatically. Specifications: Manufacturer: Melksysteme Niedersachsen (NISA) Model: Expert 100/T Function: Automatic cleaning & disinfection of milking systems Control functions: start/stop, washing programs, temperature control Flushing: Pre-, main and post-flush programmable Power supply: 230 V / 50 Hz (standard connection) Condition: used, cleaned, tested

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 2600 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...