werner used for sale

Fraese Fritz Werner TC800BJ 1984

Dough Weigher W&P, Type: Parta SN -Refurbished- - with double piston - everything completely overhauled - very good condition, as good as new - incl. 6 months warranty Visits and test runs are possible by arrangement.

General SKU204U026 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 58 F96E Mach.No.231616 Sizes Screw diameter57.8 mm Main Features Motor74 KW Inlet diameter100 mm L/D27 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter57.80 L/D27 Co-rotatingcheck Ventedcheck Water coolingcheck AC-motorcheck Screw speed191 rpm MaterialNitriding steel 1.8519 Information Year of construction1995 With switchgearcheck (as is) Floorspace2.5x1.4 m Total height1,5 m Extra Specificationsthe currently installed head” on the extruder is a cleaning head. this is not a die. - there are 2 screw shafts present. - no screw segments present. - this extruder comes with brush screws. - the extruder comes with 4 extra housing segments. this extruder was part of a complete system. any associated machines are: Collin Calander Pharma 200x400 , sku: 204U929 Sol ...

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Net weight= 820 kg, Producer: Werner & Pfleiderer condition: Refurbished Made in Germany Description Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour method of careful processing of the dough two dividing chamber low oil consumption weight range 150-900 g or 80-750 g hopper volume 120 l dimensions with hopper 1127x750x1612 mm power 1.1 kW renovated

Ashine: TC800 Serial Number: 25133 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW.

General SKU033E083 LocationBarneveld MakeWerner und Pfleiderer No.87170 Main Features MaterialStainless steel Volume0.5 Ltr. Motor2.2 KW Specified Features - Z-blade mixer Jacketcheck Capacity0,5Ltr. Double shaft kneader(1x) Single gearedcheck Trough sizes140x90x100mm With adjustable packing glandscheck With covercheck With manual operated tiltingcheck Motor1,6x2,2Kw.380Volt, flameproof Z-blade mixers MaterialStainless steel Information With switchcheck Floorspace1,2x0,6M Total height1,5M Extra SpecificationsStamp Z-blade mixersWerner & PfleidererKneaders > Z-blade mixersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...

Engine: TC800 Serial Number: 25132 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW. Legal information

General SKU354T968 LocationBarneveld MakeWerner & PFleiderer TypeContinua 37/27 D Mach.No.220331 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel Information Year of construction1985 With switchgearcheck (as is) Total height2,3 m Floorspace3,2x1,3 m Weight1700 kg Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

General SKU231U195 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 50 MCC Mach.No.64012350 Sizes Screw diameter40 mm Main Features Motor181 KW Inlet diameter165 mm L/D54 Specified Features - Double screw extruder Double screw extrudercheck Number of hours34432 Screw diameter40 mm L/D54 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motor0,79-181 kW 470 Volt Screw speed4-920-1056 rpm Feeding with hoppercheck (165x130 mm) Feeding with metering screwcheck (Werner&Pfileiderer, type: ZS-B 58, motor: 5-6 kW, 400 Volt, max. 400 rpm) Exchangeable segmentscheck Number of temperature controllers:10 Capacity200-400 kg/h MaterialFerritic stainless steel 1.4113, Mild steel, Nitriding Steel 1.8550 Information Year of construction2000 With switchgearcheck Total height0,73 m CEcheck Floorspace2,1x0,2 m Weight± 7340 kg Extra ...

General SKU398W1239 LocationBarneveld MakeWerner & Pfleiderer TypeUK-20 KSL No.229540 Year of construction1989 Main Features MaterialStainless steel Volume20 Ltr. Motor4.4 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity20 l. Trough sizes300x335 mm With covercheck With jacketcheck Double gearedcheck Motor2,2/4,4 kW, 380 volt, 720/1450 rpm Arm speed16/32 rpm Hydraulic tiltingcheck With hydraulic unitcheck MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information Mounted on foundationcheck With switchgearcheck Sizes switchgear1,20x0,50x1,06 m Total height1,15 m Weight1000 kg Floorspace1,60x0,90 mZ-blade mixersWerner & PfleidererKneaders > Z-blade mixersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

General SKU368W1091 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 30 W 9/2 Mach.No.219522 Sizes Screw diameter30 mm Main Features Motor10.4 KW Inlet diameter60 mm L/D33 Specified Features - Double screw extruder Double screw extrudercheck Number of hours8013 Screw diameter30 L/D33,3 Co-rotatingcheck Number of heating zones:8 Electric heatingcheck AC-motor10,4 kW, 440 volt With variable speed drive200-2200 rpm Screw speed4,4:1 Feeding with hoppercheck MaterialMild steel Information Year of construction1985 With switchgearcheck Total height1,30 m Floorspace2,80x0,85 m Weight1100 kg Extra Specificationshomogenizing extruder with spareparts. Double screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

chamber volume: 4 und 5 liter useable volume: -- liter friction: - motor drive power: 2x 37,5 kW Condition: used or reconditioned Specification: 2x laboratory internal mixer – used Consisting of two mixing chambers: Type: GK4N - Capacity: approx. 4 litres - Rotor geometry: tangential type - Ram: pneumatic - 1 independent DC motor: 37.5 kW Type: GK5E - Capacity: approx. 5 litres - Rotor geometry: Interlocking rotors type - Ram: Hydraulic - 1 independent DC motor: 37.5 kW The system can be sold in its current condition. Currently not functional due to severed cables, or refurbished with new electrical parts, with CE certification and warranty. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The system is sold in cleaned and tested condition. Availability: immediately Weighing range: from 0.6 to 2.45 kg Operating instructions: available Weight: approx. 650 kg Machine dimensions: approx. 160 x 65 x 140 cm Hopper dimensions: approx. 110 x 110 x 65

A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement.

A recirculating rack oven WP is available. Tray dimensions X/Y: 600mm/800mm, max. rack trolley diagonal: 1070mm, max. rack trolley height: 1800mm, baking area: 10m², max. tray load: 350kg. Machine dimensions X/Y/Z: approx. 1550mm/1650mm/2550mm, weight: approx. 2000kg, controls: Navigo 3. Documentation available. An on-site inspection is possible.

Baking area: 12m², decks: 5, deck dimensions X/Y: 1200mm/2000mm, loading guideline with 1kg bread: 30x5, heating type: oil, heating capacity: 90kW, version: Combitherm. Machine dimensions X/Y/Z: approx. 1900mm/3100mm/2450mm, weight: approx. 3000kg. Including lifting table. Documentation available. On-site inspection is possible.

x-travel: 1200 mm weight: 2 t : ja milling-head swivable +/-: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough dividing and warping machine W&P Multimatic 4-row head machine defective Head machine from Werner & Pfleiderer Multimatic 4-row used immediately available in stock for sale. W&P Roll Line / Head Machine Type: Multimatic 4-row - Standing machine - 4 rows - Machine is defective

General SKU245P316 MakeWerner + Pfleiderer (DE) Type175/120 No.231457 Year of construction1994 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Granulating sievecheck Gratercheck Sieve sizesdia.130mm x180mm Sieve perforationdia.2mm With hopperDia.500mm, h=300mm Inletdia.130mm Outlet200x120mm Motor1,5 kW, 220/380 Volt (Ex) With extra sieves(4x)dia.5mm, dia.2mm, dia.1mm MaterialStainless steel 1.4571 (316Ti) Information Mounted on mild steel framecheck Mounted on wheelscheck With switchcheck Floor space0,7x0,6 M Total height1,5 M Weight160 KG ATEX compatiblecheck Extra Specifications : : : : : : : : : : : : Sieve granulatorsWerner & PfleidererSieves > Sieve granulatorsBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared  ...

A used dough dividing and rounding machine WP Werner & Pfleiderer Lebensmitteltechnik Rotamat EN is currently for sale and immediately available in our warehouse in Bielefeld. W&P Rotamat EN Dough dividing and knitting machine Roll press Bj.2008 - Dough dividing and rounding machine for dividing and rounding dough into 30 parts - Weight range per division: 30 grams - 70 grams - 30 pieces - with plastic knife - Including 3 plastic knitting plates - One-handed operation Technical data: - 400 V / 1.6 kW - Weight approx. 410 kg - Year of construction 2008 - Outer dimensions approx: width 69cm Depth: 65cm height 150cm

Used W&P bread roll line, type: MULTIMATIC MUC-5 with Super B Compact - Head machine / dough divider Multimatic MUC-5 - 5 rows - Up to 95g dough weight per dough piece - Proofer Super B Compact - for emperor and sliced rolls - with side discharge - The system was in operation until the end Visits and test runs are possible by arrangement.

General SKU435U1404 LocationBarneveld MakeKrupp werner & pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwcheck brabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 Information TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgearcheck (as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

General SKU095Y843 MakeWerner & Pfleiderer TypeZSK-170 W-1750 5G Mach.No.221 071 Year of construction1986 Main Features Motor760 KW Inlet diameter170 mm L/D14 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter170mm, Screw length 2500mm L/D14,7 Co-rotatingcheck Electric heatingon housing no. 2, 3, 4 en 5 (65,8 KW) DC-motor760 KW, 6000 Volt Screw speed± 198 Rpm Used onDMD Information LocationBarneveld Without switchgearcheck Floorspace14,0x4,0 M Weight21.000 KG Extra Specifications :- Barrel material 1.8519, screw material 1.2344 DiscountDouble screw extrudersWerner & PfleidererDiscountExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

Used Spiraslkneader W&P, Type: SF 75 -In good bakery condition- - for 120 kg dough or 75 kg flour - Everything technically checked - Ready for immediate use - El. Connection: 3 Ph, 50 Hz, 380 V, 19.6 A, 35 A Visits and test runs are possible by arrangement.

WP Pallet Swampler ST. A+PM Pallet shoppers Werner & Pfleiderer Model: ST. A+PM with stamping boxes 5 x 7 for Kaiserbrötchen Stüpfler drivable Connection 400V, 16A-CEE plug Used machine

Key data: 38 liter, 25 liter

Werner & Pfleiderer Mixer Model GK12 Rotor type Tangential Total chamber volume 38 L Unable volume. 25 L Complete with motor Electrical control panel Chamber dims: 40x40x40cm = 0,064m3 Rubber used: EPDM, Natural EPDM, NR BR.

used deck shop oven WP Carat CS 12.8Product descriptionAll-purpose oven Manufacturer: Werner &, PfleidererType: Carat CS 12.8Year of construction: 2006mobile on castors with prooferConnected value per floor 10.8 kWHearth division all stoves divisibleDetails see pictures.

Dough Divider Dough Weigher W&P PartaU 2 Chamber Overhauled - Manufacturer: Werner & Pfleiderer Haton - Model: Parta U - Dough weigher / dough divider with 2 chambers - Weight range 2 chamber: 110 grams to 1200 grams - Hourly output: 1230 to 2840 pieces - With stainless steel funnel - Completely clad in stainless steel

Used Bun Press WP Rotamat CN Manufacturer : W&, P Type : Rotamat CN 380 Volt, Weight range from 30 - to 80 grams 30 Pitch including 3 knitting plates See pictures for details.

Dough weigher Werner &, Pfleiderer Parta UProduct descriptionManufacturer: Werner &, Pfleiderer HatonType: Parta Uused dough dividers from Werner &, Pfleiderer type Parta U with 1 chamber. The Parta U is very suitable for dough dividing for companies with higher quantities per hour.with 1 chamber Weight range: 300 grams to 2800 gramsHourly output: 925 to 1050 piecesPainted machine ( needs to be overhauled )2 pieces in stock ( photos of 2 pieces )Details see pictures.

Batch kneader WP UC 80 A Manufacturer : Werner &, Pfleiderer Type : UC 80 A extendable with 2 boiler Kettle and kneading arm made of stainless steel for max. 80kg flour 120kg dough 380 Volt 50 Hz 30 A

Vat Batch Kneader WP UC 80 BoilerManufacturer : Werner &, PfleidererType: UC 80 Kettle made of stainless steelfor max. 80kg flour 120kg doughDetails see pictures.Payment: Bank transfer or cashOur opening hours: only by appointmentShipping and collection:Pick-up: by appointmentIs the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at our other advertisements.

Bread press Werner&, Pfleiderer Rotamat E + 3 WirktellerProduct descriptionManufacturer: Werner&, PfleidererType: Rotamat 3Current type: 3 / N - 50 HzNominal voltage: 380 VNenn operating current: 2.5 AMax. Pre-fuse: 16 ACondition: used, in working order, bakery condition - please clean thoroughly before useWith three red plastic knitted platesThe working room height is adjustableFunctions: For cutting or actingDetails see pictures.

In-store baking oven WP BrillantDefectManufacturer : WPTyp : Brillant 4Details see picture

Long Moulding Machine W&, P ELR Bread Long MoulderManufacturer: W&, PÂ Type: ELR Belt Width 88cm400 Volt Mobile on Rollswith 2 Moulding BoardsThe W&, P ELR Bread Long Moulder is a machine used in bakeries and other bakeries to form and mould bread doughs. The bread moulder helps to shape the dough into the desired shape, whether elongated for baguettes or round for rolls. The machine is designed to optimize the work process and increase efficiency in the production of baked goods. The W&, P ELR bread longitudiner is simple

used bread press RotamatManufacturer : WPTyp : Rotamat GS380 Volt, weight range from 30 - to 80 grams30 graduation including 1 knitting plateThe Rotamat GS roll press from the manufacturer WP is a professional machine used in bakeries and other bakeries to form rolls and other pasta. The Rotamat GS enables precise and efficient shaping of the dough to produce uniform and attractive rolls. With this machine, bakeries can optimize production processes and ensure the consistency of their baked goods. The

Double conical kneader W&, P DK 100 extendable Product description Manufacturer: W&, P Type: DKK 100 Year of construction: 1968 Condition: used, functional, bakery condition Batch size: max. 100 kg flour Extendable Operating voltage: 380 V / 50 Hz / 25 A External dimensions: W.: 95 cm, D.: 140 cm, H.: 133 cm Details see pictures.

Head machine WP Multimatic MUCHcreator : Werner &, PfleidererType : MUC 5approx. 8000 pcs/hWeight dough piece 35gr. - 85gr.suitable for wheat, wheat mixing, rye mixing and special doughsBakery conditionDetailÒ's see picture

Water mixing / dosing device Werner &, Pfleiderer WMD 152 Product description Manufacturer: Werner &, Pfleiderer Type: WMD 152 Condition: used, functional, bakery condition for water quantity and temperature control unit Current type: 1/N / 50 Hz Nominal voltage: 230 V Nominal operating current: 0.5 A Details see pictures

 Bread press WP Rotamat CN Manufacturer : W&, P Type : Rotamat CN 380 Volt, weight range from 30 - to 80 grams 30 graduation including 3 knitting plates

used boiler extendable for Werner &, Pfleiderer DK 250 Edelstah â Product description âœ" Manufacturer: Werner &, Pfleiderer âœ" Type: DK 250 âœ" Condition: used, baker's condition - must be thoroughly cleaned before use âœ" The boiler is integrated on a trolley âœ" The trolley is easy to drive and rotate âœ" The boiler can be rotated on the trolley in all directions âœ" Material trolley: Metal âœ" Material boiler: stainless steel âœ" Inner ✠of the boiler: 120 cm, 56 cm deep âœ" Outer of the kettle: 122 cm, 100 cm high âœ" Stock: 20 pieces

used extendable boiler for W&, P DK 150 stainless steel â Product description âœ" Manufacturer: Werner &, Pfleiderer âœ" Type: DK 150 âœ" Condition: used, bakery condition - must be thoroughly cleaned before use âœ" The boiler is integrated on a trolley âœ" The trolley is easy to drive and rotate âœ" The boiler can be rotated in all directions on the trolley âœ" Material trolley: Metal âœ" Material cauldron: stainless steel âœ" for max. 240 kg dough âœ" inner ✠inner â ̃ of the cauldron: 98 cm, 56 cm deep âœ" outer of the cauldron: 104 cm, 103 cm high âœ" Stock: 8 pieces

Spreader for bread roll line / pastry lineâœ" The manufacturer and the type are unknownâœ" Condition: Used, various conditions ( See pictures)âœ" Please clean thoroughly before useâœ" External dimensions for all 3 devices: approx. 67.7 x 25 x 31.7 cm ( LxWxH)âœ" Detailed dimensions for all 3 devices: see picturesâœ" Stock: 3 piecesDetails see picturesÂœ 

Batch kneader WP UC 80 A  Manufacturer : Werner &, Pfleiderer Type : UC 80 A extendable with 2 boiler Kettle made of stainless steel kneading arm teflon for max. 80kg flour 120kg dough 380 Volt 50 Hz 30 A for more details please see picture  

Spreader for bread roll line / pastry line âœ" The manufacturer and type are unknown âœ" Condition: Used, various conditions ( See pictures) âœ" Please clean thoroughly before use âœ" External dimensions for all 3 devices: approx. 85 x 36 x 35 cm ( LxDxH) âœ" Detailed dimensions for all 3 devices: see pictures âœ" Price on request âœ" Stock: 3 pieces Details see pictures Âœ 

CNC SCREEN PRINTING MACHINE Balsfulland CNC 1500 H Manufacturer: Werner Kamann Model: CNC 1500 H Year of manufacture: 2008 Design: Fully enclosed safety cabinet with protective glazing Machine type: Multi-color CNC screen printing system CE certified: Yes Details: CNC-controlled axes Multi-color printing stations Automatic product transport system Fully enclosed safety housing Integrated drying / curing unit Designed for industrial serial production Heavy-duty steel / aluminum frame construction Application: Cosmetic containers Brochure stand Glass bottles Plastic packaging Cylindrical or slightly tapered products Industrial packaging components

Stainless steel puller trolley + pullers / 10 shelves 248x60x183 cm â Product description âœ" Used - please clean thoroughly before use âœ" Material: stainless steel, heavy quality, very robust âœ" On four swivel castors âœ" Version: 10 levels / With 2 handles: left and right âœ" Shelf spacing: approx. 15.5 cm âœ" Slide-in dimensions: approx. 242 x 58 cm (W x D ) âœ" External dimensions of the trolley with wheels: approx. 248 x 60 x 183 cm (W x D x H) âœ" Height without wheels: approx. 168 cm âœ" External dimensions of the pullers: approx. 239 x 61x 4.5 cm (W x D x H)  Details see pictures