werner and pfleiderer used for sale

More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Batch mixer dough kneading machine extendable WP UC 80 A Spiral mixer Batch mixer W&P UC 80 A - Manufacturer: Werner & Pfleiderer - Type: UC 80 A - suitable for soft dough - with stainless steel spiral tool - with 2 stainless steel shells - with 2 automatic timers - slow and fast at 2 speeds - with flour dust cover - 380 volts 50 Hz

-Dough divider weigher Manufacturer: Werner & Pfleiderer Haton BV -Type: Parta SN -400 volts -Year of construction 2001

-WP fully automatic proofing machine Manufacturer: Werner & Pfleiderer Bakery Cooling -Type: GUV -for 4 trolleys -External dimensions approx.: 192x200cm WxD and 255cm high -Inner dimensions approx: 169x140cm and 200cm high -without refrigeration compressor -Refrigerant: R 404A

Manufacturer: Werner & Pfleiderer -Type: Topline -Pastry table with guillotine and lots of tools

Bread roll press, dough part and warp knitting machine WP Rotamat EN Dough dividing and warping machine W&P Rotamat EN for dividing and rounding Weight range per division from 30 grams to 70 grams 30 pieces with 3 plastic knitting plates One-handed operation with plastic knife 400 V / 1.6 kW Weight approx. 410 kg External dimensions approx : Width 69cm Depth: 65cm Height 150cm

Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g

Bread Ribbon Rounding and Long Forming Machine WP Globus U -Bread round and long knitting machine -Werner & Pfleiderer Globus U -with 2 flour shakers -Mobile on castors Dimensions: 180x73x169cm (WxDxH)

Deck Oven W&P Matador MD101C Year: 2019 Little-used deck oven Werner & Pfleiderer Model Matador MD 101C from 2019 is for sale in stock. - Deck oven with gas burner - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: Matador MD101C52 - Fuel type : Oil gas / current is with gas burner - 79 kW - 5 shelves each 120cm wide and 160cm deep - 1 pull-out stove - With exhaust hood - Combitherm - 3N 400 V 50Hz 12A - Year of construction: 2019

Laboratory mixers, used Volume : 1 ltr. Material : Areas in contact with the product in stainless steel Drive : 0.37 KW

Refer to code 1183 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1125 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1126 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Double Z mixer with discharge screw Type : UK 2000 AEL Manufacturer : Werner & Pfleiderer Volume : 2000 ltr. Material : Areas in contact with the product in stainless steel

Offered are boilers used by WP KneaderUC80 They can also be sold overhauled. Ask for price here.

Extruder line Werner & Pfleiderer type ZSK with : Feeding system with forced agitated hopper Ø53x33D twin screw Manual filter changer, model CFM75 Rod granulation head 10 wires + 6 wires Immersion tank, model TI400/4 4 M Periplast dryer Granulator Sieving

Dough Weigher W&P, Type: Parta SN -Refurbished- - with double piston - everything completely overhauled - very good condition, as good as new - incl. 6 months warranty Visits and test runs are possible by arrangement.

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Net weight= 820 kg, Producer: Werner & Pfleiderer condition: Refurbished Made in Germany Description Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour method of careful processing of the dough two dividing chamber low oil consumption weight range 150-900 g or 80-750 g hopper volume 120 l dimensions with hopper 1127x750x1612 mm power 1.1 kW renovated

General SKU204U026 MakeWerner &: Pfleiderer TypeZSK 58 F96E Mach.No.231616 Year of construction1995 Sizes Screw diameter57.8 mm Main Features Motor74 KW Inlet diameter100 mm L/D27 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter57.80 L/D27 Co-rotatingcheck Ventedcheck Water coolingcheck AC-motorcheck Screw speed191 rpm MaterialNitriding steel 1.8519 General LocationBarneveld With switchgear(as is) Floorspace2.5x1.4 m Total height1,5 m Extra Specificationsthe currently installed head” on the extruder is a cleaning head. this is not a die.- there are 2 screw shafts present.- no screw segments present.- this extruder comes with brush screws.- the extruder comes with 4 extra housing segments.this extruder was part of a complete system.any associated machines are:Collin Calander Pharma 200x400 , sku: 204U929Sollich KK240 - Belt ...

General SKU033E083 MakeWerner und Pfleiderer No.87170 LocationBarneveld Main Features MaterialStainless steel Volume0.5 Ltr. Motor2.2 KW Specified Features - Z-blade mixer Jacketcheck Capacity0,5Ltr. Double shaft kneader(1x) Single gearedcheck Trough sizes140x90x100mm With adjustable packing glandscheck With covercheck With manual operated tiltingcheck Motor1,6x2,2Kw.380Volt, flameproof Z-blade mixers MaterialStainless steel 1.4581 (316Nb) General With switchcheck Floorspace1,2 x 0,6 m Total height1,5 m Extra SpecificationsStampOintmentsZ-blade mixersStarchRubberAgrochemicalsPlastic & polymersLubricants & oleoAnimal feedConfectioneryPaints & coatingsWerner & PfleidererIndustries > Pharmaceutical > OintmentsKneaders > Z-blade mixersIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & ...

General SKU354T968 LocationBarneveld MakeWerner &: PFleiderer Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel General TypeContinua 37/27 D Mach.No.220331 Year of construction1985 With switchgear(as is) Floorspace3,2x1,3 m Total height2,3 m Weight1700 kg Extra Specificationswith extra screwsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersWerner & PfleidererIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > ...

General SKU231U195 LocationBarneveld CEcheck MakeWerner &: Pfleiderer Sizes Screw diameter40 mm Main Features Motor181 KW Inlet diameter165 mm L/D54 Specified Features - Double screw extruder Double screw extrudercheck Number of hours34432 Screw diameter50 mm L/D54 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motor0,79-181 kW 470 Volt Screw speed4-920-1056 rpm Feeding with hopper(165x130 mm) Feeding with metering screw(Werner&:Pfileiderer, type: ZS-B 58, motor: 5-6 kW, 400 Volt, max. 400 rpm) Exchangeable segmentscheck Number of temperature controllers:10 Capacity200-400 kg/h MaterialFerritic stainless steel 1.4113, Mild steel, Nitriding Steel 1.8550 General TypeZSK 50 MCC Mach.No.64012350 Year of construction2000 With switchgear(as is) Floorspace2,1x0,2 m Total height0,73 m Weight± 7340 kg Extra Specificati ...

General SKU398W1239 MakeWerner &: Pfleiderer LocationBarneveld TypeUK-20 KSL Main Features MaterialStainless steel Volume20 Ltr. Motor4.4 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity20 l. Trough sizes300x335 mm With covercheck With jacketcheck Double gearedcheck Motor2,2/4,4 kW, 380 volt, 720/1450 rpm Arm speed16/32 rpm Hydraulic tiltingcheck With hydraulic unitcheck MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) With jacketcheck General No.229540 Year of construction1989 Mounted on foundationcheck With switchgearcheck Sizes switchgear1,20x0,50x1,06 m Floorspace1,60x0,90 m Total height1,15 m Weight1000 kgOintmentsZ-blade mixersStarchRubberAgrochemicalsPlastic & polymersLubricants & oleoAnimal feedConfectioneryPaints & coatingsWerner & PfleidererIndustries > Pharmaceutical > OintmentsKneaders > Z-blade mixersIndustries > F ...

General SKU368W1091 LocationBarneveld MakeWerner &: Pfleiderer Sizes Screw diameter30 mm Main Features Motor10.4 KW Inlet diameter60 mm L/D33 Specified Features - Double screw extruder Double screw extrudercheck Number of hours8013 Screw diameter30 L/D33,3 Co-rotatingcheck Number of heating zones:8 Electric heatingcheck AC-motor10,4 kW, 440 volt With variable speed drive200-2200 rpm Screw speed4,4:1 Feeding with hoppercheck MaterialMild steel General TypeZSK 30 W 9/2 Mach.No.219522 Year of construction1985 With switchgearcheck Floorspace2,80x0,85 m Total height1,30 m Weight1100 kg Extra Specificationshomogenizing extruderwith spareparts.AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersWerner & PfleidererIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > Cosm ...

chamber volume: 4 und 5 liter useable volume: -- liter friction: - motor drive power: 2x 37,5 kW Condition: used or reconditioned Specification: 2x laboratory internal mixer – used Consisting of two mixing chambers: Type: GK4N - Capacity: approx. 4 litres - Rotor geometry: tangential type - Ram: pneumatic - 1 independent DC motor: 37.5 kW Type: GK5E - Capacity: approx. 5 litres - Rotor geometry: Interlocking rotors type - Ram: Hydraulic - 1 independent DC motor: 37.5 kW The system can be sold in its current condition. Currently not functional due to severed cables, or refurbished with new electrical parts, with CE certification and warranty. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement.

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

The system is sold in cleaned and tested condition. Availability: immediately Weighing range: from 0.6 to 2.45 kg Operating instructions: available Weight: approx. 650 kg Machine dimensions: approx. 160 x 65 x 140 cm Hopper dimensions: approx. 110 x 110 x 65

Dough dividing and warping machine W&P Multimatic 4-row head machine defective Head machine from Werner & Pfleiderer Multimatic 4-row used immediately available in stock for sale. W&P Roll Line / Head Machine Type: Multimatic 4-row - Standing machine - 4 rows - Machine is defective

General SKU245P316 LocationBarneveld MakeWerner + Pfleiderer (DE) Type175/120 No.231457 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Granulating sievecheck Gratercheck Sieve sizesdia.130mm x180mm Sieve perforationdia.2mm With hopperDia.500mm, h=300mm Inletdia.130mm Outlet200x120mm Motor1,5 kW, 220/380 Volt (Ex) With extra sieves(4x)dia.5mm, dia.2mm, dia.1mm MaterialStainless steel 1.4571 (316Ti) General Year of construction1994 Mounted on mild steel framecheck Mounted on wheelscheck With switchcheck Floor space0,7x0,6 M Total height1,5 M Weight160 KG ATEX designedcheck Extra information Extra Specifications             Sieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & i ...

General SKU435U1404 LocationBarneveld MakeKrupp werner &: pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwbrabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 General TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgear(as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersWerner & PfleidererIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsInd ...

Used Spiraslkneader W&P, Type: SF 75 -In good bakery condition- - for 120 kg dough or 75 kg flour - Everything technically checked - Ready for immediate use - El. Connection: 3 Ph, 50 Hz, 380 V, 19.6 A, 35 A Visits and test runs are possible by arrangement.

Dough weigher Werner &, Pfleiderer Parta UProduct descriptionManufacturer: Werner &, Pfleiderer HatonType: Parta Uused dough dividers from Werner &, Pfleiderer type Parta U with 1 chamber. The Parta U is very suitable for dough dividing for companies with higher quantities per hour.with 1 chamber Weight range: 300 grams to 2800 gramsHourly output: 925 to 1050 piecesPainted machine ( needs to be overhauled )2 pieces in stock ( photos of 2 pieces )Details see pictures.

Used Bun Press WP Rotamat CN Manufacturer : W&, P Type : Rotamat CN 380 Volt, Weight range from 30 - to 80 grams 30 Pitch including 3 knitting plates See pictures for details.

used deck shop oven WP Carat CS 12.8Product descriptionAll-purpose oven Manufacturer: Werner &, PfleidererType: Carat CS 12.8Year of construction: 2006mobile on castors with prooferConnected value per floor 10.8 kWHearth division all stoves divisibleDetails see pictures.

Batch kneader WP UC 80 A Manufacturer : Werner &, Pfleiderer Type : UC 80 A extendable with 2 boiler Kettle and kneading arm made of stainless steel for max. 80kg flour 120kg dough 380 Volt 50 Hz 30 A

Vat Batch Kneader WP UC 80 BoilerManufacturer : Werner &, PfleidererType: UC 80 Kettle made of stainless steelfor max. 80kg flour 120kg doughDetails see pictures.Payment: Bank transfer or cashOur opening hours: only by appointmentShipping and collection:Pick-up: by appointmentIs the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at our other advertisements.

Bread press Werner&, Pfleiderer Rotamat E + 3 WirktellerProduct descriptionManufacturer: Werner&, PfleidererType: Rotamat 3Current type: 3 / N - 50 HzNominal voltage: 380 VNenn operating current: 2.5 AMax. Pre-fuse: 16 ACondition: used, in working order, bakery condition - please clean thoroughly before useWith three red plastic knitted platesThe working room height is adjustableFunctions: For cutting or actingDetails see pictures.

Long Moulding Machine W&, P ELR Bread Long MoulderManufacturer: W&, PÂ Type: ELR Belt Width 88cm400 Volt Mobile on Rollswith 2 Moulding BoardsThe W&, P ELR Bread Long Moulder is a machine used in bakeries and other bakeries to form and mould bread doughs. The bread moulder helps to shape the dough into the desired shape, whether elongated for baguettes or round for rolls. The machine is designed to optimize the work process and increase efficiency in the production of baked goods. The W&, P ELR bread longitudiner is simple

used bread press RotamatManufacturer : WPTyp : Rotamat GS380 Volt, weight range from 30 - to 80 grams30 graduation including 1 knitting plateThe Rotamat GS roll press from the manufacturer WP is a professional machine used in bakeries and other bakeries to form rolls and other pasta. The Rotamat GS enables precise and efficient shaping of the dough to produce uniform and attractive rolls. With this machine, bakeries can optimize production processes and ensure the consistency of their baked goods. The

Double conical kneader W&, P DK 100 extendable Product description Manufacturer: W&, P Type: DKK 100 Year of construction: 1968 Condition: used, functional, bakery condition Batch size: max. 100 kg flour Extendable Operating voltage: 380 V / 50 Hz / 25 A External dimensions: W.: 95 cm, D.: 140 cm, H.: 133 cm Details see pictures.

Water mixing / dosing device Werner &, Pfleiderer WMD 152 Product description Manufacturer: Werner &, Pfleiderer Type: WMD 152 Condition: used, functional, bakery condition for water quantity and temperature control unit Current type: 1/N / 50 Hz Nominal voltage: 230 V Nominal operating current: 0.5 A Details see pictures

used boiler extendable for Werner &, Pfleiderer DK 250 Edelstah â Product description âœ" Manufacturer: Werner &, Pfleiderer âœ" Type: DK 250 âœ" Condition: used, baker's condition - must be thoroughly cleaned before use âœ" The boiler is integrated on a trolley âœ" The trolley is easy to drive and rotate âœ" The boiler can be rotated on the trolley in all directions âœ" Material trolley: Metal âœ" Material boiler: stainless steel âœ" Inner ✠of the boiler: 120 cm, 56 cm deep âœ" Outer of the kettle: 122 cm, 100 cm high âœ" Stock: 20 pieces