We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,199 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
TIG welding rod, welding wire -Net weight: 3.0 kg -Number: 1x package available -Price: per package -Weight complete: 3.2 kg/package
new
table diameter: 1500 mm table load: 5 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 10000 Nm 0: 1,5 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 780 mm table load: 1,0 t swivelling range: 0 - 135 Grad turning speeds: 0,15 - 1,5 U/min table height adjustment: von 780 bis 1560 mm max. torque on the faceplate: 1000 Nm welding current: 500 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 900 mm table load: 1,0 t swivelling range: 135 Grad turning speeds: 0,12 - 1,2 U/min : 820 mm welding current: 500 Ampere total power requirement: 0,75 + 0,55 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
wire electrode, welding wire, welding wire -Type: AWS A5.18 ER 70 S-6 -Diameter: 0.8mm -started role -Weight complete: 4.2 kg
new
table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1000 - 1450 mm max. torque on the faceplate: 2000 Nm engine output: 0,75 / 0,55 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1400 mm table load: 5 t swivelling range: 0 - 135 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1100 bis 1950 mm max. torque on the faceplate: 7000 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 560 mm table load: 0,3 t swivelling range: 0 - 90 Grad turning speeds: 0,25 - 4,0 U/min : 360 Nm welding current: 500 Ampere total power requirement: 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
- Compressed air: 6 bar - Transport speed: 3 - 30 m/min - Welded frame dimensions (LxW): 580 x 440 mm - Film core diameter: 76 mm - Max. film roll diameter: 300 mm - Max. product height: 180 mm - Film thickness: 7 to 60 mμ - Max. foil width: 550 mm - Cycle rate: 40 cycles/min - Total power: 3.7 kW - Machine weight: 560 kg - Space requirements (W x D x H): 2.05 x 1.72 x 1.48 m - Condition: good Details Angle welding machine fully automatic, permanently heated welding knife, DELTA color touch screen, horizontal and vertical photocells, film material polyolefin fine shrink films, PVC, PLA and other bio-films, with labeler / barcode printer SATO M8485Se Accessories no other accessories, documentation
new
table diameter: 1600 mm table load: 6 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 12000 Nm 0: 1,5 / 2,2 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Projection welding machine for sale. The welding machine has been completely renovated. All elements are either regenerated or replaced with new ones. Modern Aspa ASM-713 controller installed. We have complete documentation for the machine.
used
Lincoln Powertec 425S welding machines Following the closure of our manufacturing plant, we are selling our 5 Lincoln brand welding machines.
used
RS BEFI MIG RS 350 DV welding machine Following the closure of our manufacturing plant, we are parting with our 3 RS BEFI brand welding machines
new
welding power: 30 - 290 A (stufenlos) welding power: ED 60% 175 A Wire thickness: 0,6 - 1,2 Stahl mm Wire thickness: 1,0 - 1,2 ALU mm voltage: 400 V weight: 67 kg LORCH authorized trader - other models on request Description: Automatic setting With the help of the automatic adjustment of the wire feed speed The Lorch M 304 supports you with the selected voltage level Finding the perfect working point. Quality wire feeder The Lorch M 304 comes with a 4-roller wire feed as standard Robust housing due to its compact and robust You can easily place your Lorch M 304 under the housing with sturdy wheels Stow away the workbench or use the top of the machine as a storage area. Double gas bottle lock For optimal safety, the Lorch M series has a double Gas bottle lock. So you can move your power source safely. Furnishing: - Integrated 4-roll wire feed - ML2500 burner, 4m - Workpiece lead 25 mm² ...
new
table diameter: 700 mm table load: 0,5 t swivelling range: 0 - 135 Grad turning speeds: 0,2 - 3 U/min height adjustment: 400 - 900 mm boring diameter: 100 mm welding current: max. 500 Ampere total power requirement: 0,75 kW including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1100 mm table load: 2 t swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min : 4000 Nm 0: 1,1 / 0,75 kW welding current: 500 Ampere • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1300 mm table load: 3 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 6000 Nm 0: 1,1 / 1,1 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1200 mm table load: 3 t swivelling range: 0 - 135 Grad turning speeds: 0,07- 0,7 U/min table height adjustment: von 980 bis 1750 mm max. torque on the faceplate: 4500 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1100 mm table load: 2000 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1100 - 1550 mm max. torque on the faceplate: 4000 Nm engine output: 1,1 / 0,75 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1400 mm table load: 4 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 8000 Nm 0: 1,1 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1300 mm table load: 3000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1200 - 1800 mm max. torque on the faceplate: 6000 Nm engine output: 1,1 / 1,1 kW welding current: 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 1600 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1210 bis 2238 mm max. torque on the faceplate: 1200 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cell with welding robot (MIG) Motoman YR-MA01400-A00 Cell with welding robot (MIG) Yaskawa - Year of construction: 2010 - 6-schsen robot Motoman YR-MA01400-A00, - Source: Motoweld EL350 III - Positioner Yaskawa 2 pcs.. - Dimensions of the cell: 3300 mm x 3000 mm x 2400 mm - Control Motoman DX 100 - Weight: 2.5 t
used
Continuous wire welding equipment Suitable for aluminum welding low:5A/10v high:270A/21v Overall machine dimensions 1000x450x1200mm
used
Type: welding robot Romat 410 Welding machine MC3R 553. Workstation with 10m travel. WPG-S-20000N positioners with a span of up to 5m.
used
This YASKAWA Motoman MA1900 Robot welding station machine was manufactured in the year 2012. It is included with 3 stations: Robot Motoman MA1900, DX 100 control system and Welding machine Lorch Saprom Speedpulse S8.
used
Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.
used
Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.
used
Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.
used
Workpiece weight: 10000 kg Table diameter: 1400 mm Make Stahler 10 T Type SD 10000 Year 70 er Welding positionar manipulator Workpiece weight by welding positioner (kg) Table 1400 x 1400 Table diameter (mm) Load = 10.000 Kg Workpiece weight by selfaligning rotater (kg)Tilt 0 - 135 Gr Workpiece diameter (mm)Remote control Number of rolls New Elctr. cabinet
used
Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.
used
Equipped with ARC SR-A3510 welding machine. Includes Binzel welding torch cleaner.
used
Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.
used
Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.
used
Equipped with welding torch, ground clamp, electrodes and welding carriage.
used
SPECIFICATIONS: Mobile welding fume extraction with suction arm for welding fumes Installed capacity KW: 1.5
used
Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.
used
Mounted on platform with heavy-duty spot welding installation (70kVa) and welding manipulator 2-gang with shaft locking size
used
Equipped with: Lorch WUK 6 cooler; Wheels; 8m cable welding torch; welding torch with controls; 4m ground cable PLEASE NOTE: C02 bottle not included
used
Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.
used
Butt Welding Machine Fabr. IDEAL Type AS 5Built in 1977Rated power at 50% ED: 30 kVAConnected load: 35 kVAPower setting above: 10 levelsOpen circuit voltage: 3.5 - 7 Vhighest compression force: 1.4 MPMax. Butt welding performance: 400 mm2Protection: 100 AExternal dimensions: 1150 x 1600 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
MIG / MAG welding machine make DALEX type CGW 302Mash. -No: 756757Welding power of: 30 - 320 ANumber of welding steps: 18Continuous operation: 100% ED 300 AOpen circuit voltage: 19 - 53 Vweldable wire electrodesSteel / stainless steel: 0.8 - 2.0 mmAluminum: 0.8 - 2.0 mmPower factor cos phi: 0.75Duration Maximum current: 24/25 AMains voltage: 3 x 380 VDimensions L x W x H: 750 x 520 x 850 mmWeight approx: 180 kgWith- separate wire feed- Hose package with burner water cooled- Ground cable- Pressure gaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Welding rectifier make MESSER-GREISHEIM type Uniwig G 200Built in 1987Power Rectifier: 15 - 180 Aat 180 A: 35% EDat 150 A: 60% EDat 100 A: 100% EDPower TIG welding: 2 - 200 Aat 200 A: 35% EDat 150 A: 60% EDat 100 A: 100% EDOutside dimensions approx: 600 x 1000 x 930 mmfor rod electrode and TIG DC steel / VAWith- mobile- TIG hose package with burner 4.0 m- Ground cable with clampsvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Served 1 time for a test - MIG and TIG welding - Operates on alternating current and direct current - Digital display of welding parameters - Built-in inverter
used
Welding transformer make DALEX type TK 52Machine -No: 5217843 built in 1984Technical specifications:Power range: 25 - 250 A60% ED at: 250 A100% ED at:185 AExternal dimensions approx.: 600 x 700 x 1100 mmwith- mobile- Welding station equipment with electrode holder and ground wireused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Stud welding machine make SOYER type BMS 600Fabr. -No: 6601Weldable threaded bolts: 2 - 8 mmExternal dimensions: 400 x 350 x 250 mm highWith- Stud welding gun- Ground cableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Stud welding machine make SOYER type BMS 600Fabr. -No: AH3581, year of construction 1983Weldable threaded bolts: 2 - 8 mmExternal dimensions: 400 x 350 x 250 mm highWith- Stud welding gun- Ground cableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Combined welding machine make TECNA type T-SPOT 120with 2-fold spot welding function, Art. -No: 3541Machine -No: 00238, built in 2015Power at 50% ED: 5 KVAmaximum direct current: 2.6 KAHeat flow: 8.3VNo-load secondary voltage: 8.3VFuse: 16 AExternal dimensions: 345 x 220 x 420 mmWeight: 28 kgWith- Multifunction gun- Ground cable- electrodes- CE marking- for spot weldingvery little used from body shopin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Spot welding machine make ARO type N 303Machine -No: YR231122 Year 1982Welding power at 50% ED: 15 kVAElectrode holding force: 70 - 150 kgextendable electrode holders: 220 - 540 mmWelding time setting: 0.05 - 1.5 sec.Welding power sheet metal: 0.5 - 2.0 mmWelding performance of round iron: 4.0 - 10 mmWith- FootswitchUsed, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools