welding used for sale

SPECIFICATIONS: Mobile welding fume extraction with suction arm for welding fumes Installed capacity KW: 1.5

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

Specifications: - BIA tested welding suction device - Articulated suction arm 3000 mm - Air volume flow approx. 1000 m³/h - static pressure 2700 pa - Filter area approx. m² - Filter control - Light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Welding smoke filter, welding smoke extraction -Suction tube: flexible -Diameter: 230 mm -Length up to: 7 m -Price: per piece -Number: 3 pieces -Dimensions: 1250/290/H270 mm -Weight: 22 kg

Stick electrodes 3.25 x 350 -Type: Guarantee -Price: per package -Number: 5 packages available -Weight per package: 5.3 kg

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Stick electrodes 2.5 x 350 -Type: CONARC 49 C -Price: per package -Number: 3 packages -Weight per package: 2.6 kg

Stick electrodes 4.0 x 350 -Type: Gricon 515 S -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg

Stick electrodes 2.0 x 350 -Type: Special -Weight per package: 3.9 kg

table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,5 - 5,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stack electrode 4.0 x 350 -Type: Cromocord Kb -Weight per package: 4.8 kg

Stacking electrode 2.5 x 350 -Type: SL 19 G -Weight per package: 2.7 kg

Stick electrodes 4.0 x 350 -Type: FE 1006 (FE Yellow S) -Weight per package: 4.6 kg

stick electrodes 3.2 x 350 -Type: Phoenix SH Yellow B -Price: per package -Quantity: 2 packages available -Weight per package: 4.4 kg

table length: 1200 mm table width: 800 mm : 28 mm table height: 450 - 800 mm : 500 kg weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1490 mm table height: 840 - 890 mm weight of the machine ca.: 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stacking electrode 2.0 x 250 -Type: FOX KES -Weight per package: 3.3 kg

Stack electrodes, welding electrodes -Stable electrode: 4.0 x 350 -Type: FINOX 4337 AC -Weight: 5.1 kg

table length: 1590 mm table width: 1490 mm table height: 840 - 890 mm weight of the machine ca.: 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 330 mm table load: 350 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 120 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 52 Kg dimensions of the machine ca.: 640 x 490 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 330 mm table load: 220 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 100 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 48 Kg dimensions of the machine ca.: 640 x 440 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Stack electrode 4.0 x 350 -Type: 4370 W -Weight: 4.7 kg

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

Stack electrode 4.0 x 350 -Type: 330.1 SH Purple R -Weight: 4.8 kg

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

number: 57 Positionen : 22 mm condition: neu weight: 66 kg Set 2 57 pieces, 22mm system, consisting of: Clamps: 6 x 220610.1 Clamps 4 x 220630.1 Prism 4 x 220645.1 Bolt: 18 x 220511 Magnetic bolt 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Stop: 2 x 220426.N Angle: 4 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Plant No. 04E 85048 Connection voltage 1 x 230 V Setting range 40 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 26 Ampere 3.25 rod electrodes, since 120 / 130 amps Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age approx. 10 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 16 qmm, 4 mr. long 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy versio ...

Stick electrodes 3.2 x 350 -Type: Thyssen Ce I 70 -1 package: 650 pieces -Weight: 17.9 kg

Stick electrodes 4.0 x 350 -Type: Phoenix SH Green TB -Weight: 4.7 kg

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Stick electrodes 2.5 x 350 -Type: Gricon 8 A Price: per package -Number: 3 packages available -Weight per package: 4.6 kg

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Machine Type Electrode Inverter Welding Rectifier Ep Systems brand Plant No.: 99J33202 Type W 150 E Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 35 % ED at 150 Ampere 60% ED at 120 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 120 x 300 x 270 mm Weight 4 kg Age approx. 10 years Condition workshop tested good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 25 pieces rod electrodes Böhler 2.5 x 350 mm 25 pieces rod electrode ...

Stack electrode 4.0 x 450 -Type: OK Selectrode 83.28 -Weight per package: 5.8 kg

Stick electrodes 5.0 x 450 -Type: FOX MST -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg

Machine Type Electrode Inverter Welding Rectifier with PFC control STEL brand Type MAX 191 PFC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 115 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 420 x 160 x 280 mm Weight 9 kg Age 6 months Special accessories PFC control Condition workshop tested, new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 pair of welder gloves with cuff 1 piece slag hammer, heavy version 1 piece steel wire brush 2-row 20 pieces rod electrodes Böhler 2.5 x 350 mm 20 pieces rod ...

Stick electrodes 2.5 x 250 -Type: FOX CM 2 Kb -Price: per package -Number: 8 packages available -Weight per package: 3.3 kg

table length: 1150 mm table width: 1150 mm table load: 2 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: JWelding Type: HB-20 Capacity: 2.000 kg Plateau dimensions: 1.150 mm ø Working height platform, horizontal: 1.180 mm Working height platform, vertical: 1.000 mm Rotation diameter vertical: 1.550 mm ø T-slots: 8 Electrically tiltable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 4.0 x 350 -Type: Phoenix Green S -Price: per package -Number: 1 packages available -Weight per package: 4.7 kg

Stick electrodes 2.5 x 350 -Type: Overcord -Price: per package -Number: 5 packages available -Weight per package: 4.8 kg

Stick electrodes 4.0 x 350 -Type: OK 63.30 -Price: per package -Number: 2 packages available -Weight per package: 4.6 kg

Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Stick electrodes 4.0 x 450 -Type: Phoenix 120K -Price: per package -Number: 9 packages available -Weight per package: 5.9 kg

Replacement welding controls for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information

Stick electrodes 4.0 x 450 -Type: Thyssen 600 Violet W -Price: per package -Number: 14 packages available -Weight per package: 6.2 kg