135,435 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 8389 Type: 2x ABB IRB 2400L Producer: Robolution Created: 2006 Parameters: Control system: IRC5 Door height: 2800 mm Door opening: 2800 x 2200 mm Machine weight: 5500 kg Height: 2200/3100 mm Width: 3750 mm Length: 5700 mm Equipment: Touch Screen The robot cell consists of: 2x ABB IRB 2400L Robot 2 x lathe (robot welding on one side of the table and the operator loads the material on the other side of the table) Welding power sources: 2x Fronius TPS 4000 Equipment for welding wires with diameters of 1 and 1.2 mm Burner
Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible.
Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG
table length: 1200 mm table width: 800 mm table height: 900 mm table load: 2000 Kg weight of the machine ca.: 0,24 t dimensions: 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
With asortment tube holders Auction-ID: A1-48959-171
With asortment tube holders Auction-ID: A1-48959-169
Weld edge former INDUMASCH SIEGEN Type V 12Masch. No.: 50674 Year of construction 1992Material thickness max. 40 mmChamfer angle 45Working speed approx. 3 m/min. Motor power 2 kWNetz connection 400 Volt, 50 Hz- Flow / return- Built-in guide roller for chamfer angle 45- Belt guard missingDimensions L x W x H 650 x 600 x 650 mmWeight 75 kggood condition; used
table diameter: 1500 mm table load: 5,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 10000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,5 + 3,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
With asortment tube holders Auction-ID: A1-48959-170
Welding turntable ESS type DT 50Fabr. No. 86 / 1125 Year of construction 1986Load max. 50 kgFace plate diameter 300 mmFace plate speed 0.19 to 5.7 rpm. Control voltage 24 voltMotor power 100 wattsMains connection 220 volts, 50 Hz.- Face plate in the position infinitely variable swivel by 180- Speed control via rotary potentiometers- Clockwise, counterclockwise rotation- Foot switch- 2-stroke and 4-stroke operation- Sliding contact for the mass up to 200 Amp.- New control ESS PS3 from year of construction 2009Space requirement L x W x H 600 x 500 x 350
Includes: Claenox 4.0 cleaning machine Auction-ID: A1-41279-377
Welding Fume Extraction, Soldering Extraction, TBH Type LN 230High Vacuum Filter Device, Laser Extraction, Laboratory Extraction, Extraction System, Filter SystemFabr. No. 230717 year of construction 2018Volume flow 320 m3/hEffective volume flow 50 to 250 m³/hstat. Pressure 20000 PaMotor power 1.1 kWNet connection 230 volts, 50 Hz- stepless suction power regulation via the control electronics on the device- upper part of the housing with several extraction connections 100, 80 and 2x 50 mm- mechanical air filter with approx. 99% separation efficiency- 1 piece filter 300 x 300 x 225
With asortment tube holders Auction-ID: A1-48959-166
Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.
table diameter: 700 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min : 900 Nm total power requirement: 0,37 / 0,37 kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gas bottle approx. 150 bar Auction-ID: A1-48979-48
With asortment tube holders Auction-ID: A1-48959-167
A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.
current capacity: 76 kVA throat: 0 mm contact pressure capacity: kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Spot Welder mobile, 76 kVA-50%,117 kW Connecting Load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: 800 x 800 mm table load: 1500 Kg swivelling range: 0 - 105 Grad turning speeds: 0,15 - 1 U/min height adjustment: 672 - 1180 mm hollow spindle diameter: mm welding current: 500 Ampere max. torque on the faceplate: 3000 Nm total power requirement: 0,75 kW dimensions of the machine ca.: 1560x1120x750 m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fal ...
With asortment tube holders Auction-ID: A1-48959-164
With asortment tube holders Auction-ID: A1-48959-168
With asortment tube holders Auction-ID: A1-48959-165
table length: 2900 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,9 t dimensions: 2,9 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1600 mm table load: 6 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 12000 Nm 0: 1,5 / 2,2 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1400 mm table load: 2,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.
Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.
welding current: 30 - 200 A connected load frequency: 230 V weight: 3,6 kg Dimensions (LxWxH): 290 x 135 x 2600 mm Scope of delivery: TIG welding machine Buddy TIG 160 Electrode and earth cable 3m TIG torch ET 17 4m Gas hose with union nut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping range of chuck: 120 - 380 mm height: 95 mm daylight: 170 mm external diameter: Futter 400 mm external diameter: Spannhebel 600 mm weight: 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Includes welding torch and hose Auction-ID: A1-41279-299
number: 24 Positionen weight: 22 kg condition: neu 0 Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 clamps, clamping height 300mm, variable projection 8 clamping bolts 2 pieces stop 100mm 4 pcs. stop 150mm 2 pieces stop 225mm 1 piece torch holder 1 piece perforated brush 30mm 1 piece Separating Lotion 500ml 1 pc. Welding table cleaner on a natural, biological basis 500ml The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
equipped with FK71 Fronius cooling unit Auction-ID: A1-48552-58
Includes Esab Feed 30-4 feeder Auction-ID: A1-49606-35
table diameter: 1200 mm table load: 1,2 t swivelling range: 0 - 120 Grad turning speeds: 0,06-0,6 U/min max. torque on the faceplate: 2400 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,75 + 1,1 kW weight of the machine ca.: 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm weight of the machine ca.: 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional Accessories shown are optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1400 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,5 t dimensions: 1,4 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
250 € 
