135,367 used machines on RESALE, but how to find them? Machine Search
table diameter: 180 mm : 10 Kg : 5 Kg chucking diameter: 65 mm turning speeds: 2 - 10 U/min swivelling range: 90 Grad tilt adjustment: manually/mechanicall: manuell connected load frequency: 230 V weight of the machine ca.: 15 Kg dimensions of the machine ca.: 400 x 400 x 400 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wire electrode, welding wire, welding wire -Manufacturer: Elga, protective gas wire electrode cored wire Elgacore DWA 50 Ø1.2 mm -Type: Elgacore DWA 50 Ø1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 5.1 kg
Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 4.0 kg
Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight roll: 12.0 kg
From operating resolution: MIgatronic PI 250 DC Year of construction 2014 Pulse function HF Ignition Water cooling without function Welding Range: 5-250Amp 250Amps at 30% ED 180A at 60% 150A at 100% 220 volts with 8meter burner (sheathing partially damaged), ground cable and pressure reducer Dimensions in mm approx. 1100x630x720 --Very neat device-
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 600 x 140 mm -Weight: 13.2 kg
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 560 x 120 mm -Weight: 9.8 kg
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 600 x 130 mm -Weight: 10,9 kg
From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.2 m -water cooled -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg
From operating resolution: Selco Genesis 352 GSM DC Device No.007410000118 with water cooling Welding range 6-350 amps 350Amps at 60%ED 270Amps at 100% ED 380 volts with 8meter burner AQ 18F with flexible head and ground cable Adjustable pulse function RF Ignition 2/4 stroke
ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...
From operating resolution: Pulse welding system Cebora EVO Speed Star 380 TC Specifications: Control Sound Digibox MIG P4 Welding range 10-380 amps 310Amps at 100% ED 4 Roller feed Water cooling TIG welding possible in the DC range Feed rollers 1.2mm Burner 4meter with 1.0mm wire, ground cable and pressure reducers-- Dimensions in mm approx. 950x850x1020 Operating instructions
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg
Ground cable for shielding gas device, electrode device, stud welding device -Welding cable: extension / connection cable -Length: 8.0 m -Connector: 5-pin -Transport dimensions: 460/450/H80 mm -Weight: 3.8 kg
From operating resolution: Kjellberg TIG 321 AC/DC Year of construction 2013 Pulse function HF Ignition Water cooling Welding Range: 5-320Amp Gyg2uk 320Amps at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very neat device-
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
Ground cable for shielding gas device, electrode device, stud welding device -Welding cable: extension / connection cable -Length: 10.0 m -Connector: 14/8-pin, see photos -Cable coupling: DIX SK 70 -Transport dimensions: 460/450/H80 mm -Weight: 9.2 kg
welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg
Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg
Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1000-N QiLin The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multipl ...
Welding iron -Welding bar: for welding plastics, from mask manufacturing machine -Thermal panels/air nozzles: 2 each -Dimensions: see photos -Number: 3x hangers available Price: per piece -Dimensions: 240/100/H55 mm -Weight: 0.7 kg/pc.
Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg
table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg
- Robot Kuka KR 8 r1420 arc HW AS NEW CONDITION - controller KR C4 compact Mmxwykv - custom metal base This KUKA KR 8 R1420 arc HW robot was manufactured in 2016. Originating from Germany with a load capacity of 8 kg and a reach of 1421 mm, it weighs 179 kg and is powered by the compact KR C4 controller.
FANUC M-710iC/70 robotic station for laser cutting and welding was built in 2017. The offered station is complete and includes the following components: – FANUC M-710iC industrial robot – IPG YLS-4000-S2T fibre laser source – FANUC SYSTEM R-30iB controller – 2-position rotary table with horizontal rotation – 2-axis L” type positioner – semi-automatic head changing system – HIGHYAG BIMO-FSC laser cutting head – IPG Photonics FLW-D30 Vertical oscillating laser welding head with HD camera – KLIMAWENT UFO-4-M/N-1/R filtering system – wire feeder (4 reels and equipment for 0.8 mm and 0.6 mm wire) – portable teach pendant FANUC A05B-2255-C101 – control system – metal construction with cabin Laser machining of workpieces is performed by a specially designed FANUC M-710iC/70 robot arm, distinguished by the best permissible load and inertia in its categ ...
floor-plate length: 3000 mm floor-plate width: 1500 mm floor-plate height: 150 mm total power requirement: kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 3,0 x 1,5 x 1,3 m The welding table is made of 15 mm thick steel plates. assembled and welded. The table stands on height-adjustable feet. The mounting holes for the assembly and fastening parts have a diameter of 28 mm. A starter package with alignment and fastening parts is included at a price of € 750,00 (price is included) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ground cable for MIG/MAG welding machine, electrode welding machine, welding cable extension, MMA welding cable -Welding cable: Ground cable for MIG/MAG welding machine, electrode welding machine -Version: Dinse plug -Length: 10 meters -Weight: 5.7 kg
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: CEA, rocker arm spot welding machine type ZP 28 -Rated power: 25 kVA -Arm length: 550 mm, adjustable length -Operation: via foot pedal -Dimensions: 1050/330/H1270 mm -Weight: 152 kg
current capacity: max. 13 KW throat: 120 mm contact pressure capacity: max. 120 kp voltage: 400 V open-circuit voltage: 2,5 V output voltage: 6300 A welding power: 2 x 2mm Blech fuse protection -thermal: 25 A total power requirement: 13 kW weight of the machine ca.: 12 kg dimensions of the machine ca.: 0,5 x 0,1 x 0,2. m Manual spot welding machine with 2 sets of welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single-head welding machine, single-head welding machine, fighter welding machine, butt welding machine -Voltage: pneumatic -Weight: 270 kg
mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg
Pipe welding accessories, forming gas welding equipment, forming gas welding aid -Diameter: 600 mm -Rubber sealing lip -with transport rollers for disassembly from the pipe to be welded -Dimensions: 650 x 450 mm -Weight: 18 kg
table length: 4000 mm table width: 2000 mm : 28 mm table height: 815 mm : kg weight of the machine ca.: 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stick electrodes 3.25 x 350 -Type: AWS: E 6013 -Analysis: C 0.07, Si 0.2, Mn 0.5% -Number: 23 packages available -Price: per package -Weight per package: 4.3 kg
Clamp welding machine, foil welding machine -Connection: 220 V -Working width: 300 mm -Weight: 10 kg
TIG welding rod, welding wire -Net weight: 3.0 kg -Number: 1x package available -Price: per package -Weight complete: 3.2 kg/package
table length: 1200 mm table width: 800 mm table height: 800-975 mm table load capacity: 250 Kg weight of the machine ca.: 150 Kg dimensions: 1,2 x 0,8 x 0,85 m Special price! Siegmund workbench Perforated plate made of high-quality steel S355J2+N + plasma nitriding - 16 mm bore - Surface holes in 50x50 mm grid - Material thickness approx. 12 mm - Height-adjustable feet for working height in the range of 800 to 975 mm - Frame made of aluminum profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type: MIG/MAG welding machine Make Merkle Type ME 251 LK Appendix No. 7206 Connection voltage 3 x 400 volts Adjustment range 40 - 250 amps Duty cycle 35% ED at 250 amps 60% ED at 170 amps Current setting 8 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 815 x 440 x 680 mm Special accessories for point and interval equipment Weight 122 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Adorned 1 pair of welding gloves 1 Pi ...
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg
Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg
Machine Type: TIG Inverter Welding Machine Water-cooled DC system Make Merkle Type TIG Insquare 350 W-DC Appendix No. 24.410 Connection voltage 3 x 400 volts Adjustment range 5 – 350 amps Duty cycle 60% ED at 350 amps 100% ED at 270 amps Current adjustment infinitely variable max. weldable material thickness steel / stainless steel = 10 mm Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm incl. bottle holder Weight 130 kg Age approx. 30 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch SR 18 SC, 8 mtr. long 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruc ...
MIG/MAG welding machine, MIG/MAG welding machine -Max. welding current: 320 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg
maximum number of results exceeded
please refine your search
