welding tig used for sale

Welding turntable - Welding rotary device with housingRound welding deviceLoad capacity approx. 50 kgTurning chuck diameter 300 mmTurning chuck speed 1.0-15 rpm. Mains connection 230 volts, 50 Hz- Spiral lathe chuck with inwardly stepped chuck jaws- Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left- Start via electric switch- Welding current transmission with sliding contact- Extraction connection 160 mm- Interior lightingDoor opening W x H 715 x 1060 mmInterior dimensions W x D x H

Spot Projection Welding Machine NIMAK Type PMP 5 / 35Spot Welding Machine, Projection Welding MachineFabr. No. 88100 Year of construction approx. 1988Power at 50% ED 35 kVAArcharge 250 - 450 mmWorking stroke 40 mmElectrode force 100 - 460 kp infinitely adjustableElectrode force at 6 bar 460 daNBobedience air pressure 2 to 6 barElectrode arm 60 mmElectrode holder 30 mmInsert electrodes cone MK 2 17.78 mmArm spacing 200 / 400 mmAdjustability of the electrode holder 200 mmConnected load 83

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

Spot Projection Welding Machine NIMAK Type BMP 20/150Spot Welding Machine, Projection Welding MachineMasch. No. 81692 Year of construction approx. 1980Power at 50% ED 150 kVAAf clamping plate lower 200 x 160 mmClamping plate upper 200 x 160 mmPower setting infinitely variableThroat max. 150 mmElectrode force 200 - 2000 kp infinitely adjustableOperating air pressure max. 6 barConnected load 600 kVANnet connection 380 volts, 50 Hz- welding control DTW 4Z 2P- single points and series points- bounce

MIG MAG welding machine, arc welding machine EWM type MIG 230Fabr. No.: L/0340 Year of construction 1994Power 230 Amp. = 35 % ED 120 Amp. = 100 % EDEsetting range 8 stepsMains connection 400 volts, 50 Hz, 16 Amp. Plug- 2-stroke and 4-stroke welding device- Spot welding device- 2-roll wire feeder- 3 meter hose package with central connection- Welding gas pressure reducerSpace requirement L x W x H 1000 x 450 x 700 mmWeight 70 kgGood condition; used

Stud welding machine KÖCO KÖSTER & CO. Type 601 EWider-stand welding machine with capacitor discharge technologyFabr. No. 5356 Year of construction approx. 1995Maximum welding current 600 Amp.Welding power at 3% ED 600 Amp.Welding power at 100% ED 100 Amp.Bolt diameter 3-8 mmMaximum welding time 550 msMains connection 400 Volt, 50 Hz, 16 Amp. Plug- Welding current adjustment infinitely variable- Welding time adjustment infinitely variable- Welding gun KÖKO K14 with stroke ignition with 2 meter connection cable- 2 pieces of ground cable with 5 meters

Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with

Spot welding machine DALEX type SL 16 EAMasch. No. 68611900-5 Year of construction 1986Nominal output at 50 % ED 16 KVASwelding capacity max. 50 KVA charge max. 500 mmElectrode force max. 17 - 278 daNElectrode arm 45 mmElectrode holder 25 mmArm spacing 140 mm / 280 mmCircuit breaker 8 stagesControl 4 times with single and series pointsOperating pressure 1-6 barOpen circuit voltage 1.8 to 3.6 voltsConnected load 37 kVANnet connection 400 volts, 50 Hz- Triggering of the welding cycle via

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Combination of hot plate welding machine (balti ag) and hot melt adhesive technology pump for PUR hot melt adhesives. With dosing pump and control, suitable for joining and gluing plastic parts (pipes, profiles, plates). Supplied on pallet. Function not tested Weight: approx. 200 kg; Operating voltage: 400 V, 50 Hz; Hot plate welding machine with clamping device and control; Hot melt adhesive technology Pump for PUR hot melt adhesives with control unit Auction-ID: A7-49816-115

HERKULES HCS 200 Electrode Welding Machine For sale is a compact HERKULES electrode welding machine type HCS 200 for classic MMA welding work. Equipment / Scope of delivery: Manufacturer: HERKULES Type: HCS 200 Welding process: Electrode welding / MMA Adjustable welding current Electrode holder with welding cable Ground terminal with cable Connecting cable Integrated carrying handle Robust, compact metal design Scope of delivery according to illustrations Suitable for general welding, repair and maintenance work in the workshop and operation. Auction-ID: A1-49948-9

Technical data: 2009 overtaken Table load: 100 to. Table diameter: 3500 mm Table diameter with extension arms: 6000 mm Plan disc: 8 double T-slots Slot distance: 180 mm incl. 8 extension arms to increase the diameter of the washer to 6000 mm.

Table load 35 to . tischdurchmesser 3,000 mms

see picture attached

Table load 30 to . table diameter 3,000 mms

Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)

oven 650 1.0x1.0x5m bogie 6 zones PLC data monitoring Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermi ...

Faceplate speed level 1: 0.005 0.25 Faceplate speed level 2: 0.019 1.02

Table load: 12 to.

Technical data: Table load 40 to. Table diameter 3,330 mm Speed 0.01 0.2 U/Min. Voltage 400 V / 50 Hz Power 6 KW To the weight of the table 15. Dimensions L x W x H 5,600 x 2500 x 3,200 mm

Technical data: Max height of welding 4,000 mm Max Schweissllänge 4,000 mm with ESAB A6 control

welding line for galvanized and black pipes.

Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price

Rated output at 50% ED: 63kVA Short circuit current: 31, 5kA Eletrodenkraft: 100-600daN / EH Projection: 250-550mm --- Control: MPS 10 (5 times, 8-program) --- incl. additional options: -Foot switch "unpowered setting up" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 100kVA Short circuit current: 41, 5kA Eletrodenkraft: 100-600daN / DH Projection: 350-650mm --- Control: MPS 200multiR1 (8 times, 8-program) --- incl. additional options: -Foot switch -Double stroke cylinder -Flow switch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

SWELD welding machine - Mains connection: 415 V (50/60 Hz) 3 Ph. - Transformer fuse: 30 A - Duty cycle: 375 A 40 % 300 A 60 % 230 A 100 % - Protection class: IP 23 S Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Technical data: Max height of 4,500 mm / 4,600 mm Maximum throat depth 4,500 mm / 4,000 mm Welding source ESAB, LCA1200 / ESAB TAF 1250DC Welding machine carrier 1 x without welding equipment broken demotiert Type: MH45. 2 / BODE DSCN 3109

Posts to Erico Cadweld Welding Metal for the production of welding connections between copper cables e.g. for grounding cables, lightning conductors Special price

wire diameter range: 1,0 - 5,0 mm ringdiameter: 80 - 600 (1.000 mm) wire feeding length: max. 10.000 mm output: 12 - 30 rings/min welding capacity: 10 kVA; ready for operation

Connection - 380 V, 50 Hz, control voltage 24 V, output at 100% ED 3.5 kVA, Btto 235 kg, more tech. Info from nameplate

Electric welding equipment FRONIUS WTU 205, 2 stub

Thyristor-controlled, pneumatic point welding pliers with timer and compensation device 6kVA water-cooled

Rated output at 50% ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN / easy lift Projection: 350-650mm --- Welding control: MPS 10 (5 times, 8-program) --- Incl. additional options: -Flow switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

BIZETA BZ3T4P/8 welding machine was built in Italy in 1989. The machine is designed to perform a very precise and accurate welding of materials such as PVC and polyester by subjecting the surface of the material to high-frequency energy. Electricity in the form of an electromagnetic field generates heat, which softens the material and fuses its layers together. At the end of the process, the BZ3T4P/8 welding machine with rotary table cools the material surface while holding it under a high pressure, resulting in the formation of a very strong weld. The total weight of the machine is 3400 kg. Technical parameters of the high frequency welding machine BIZETA BZ3T4P/8 - maximum welding force: 9000 kg - maximum punching force: 3000 kg - power: 22 kW - nominal operating frequency: 27.12 MHz - maximum electrode power efficiency at high frequency: 10 kW - number of work heads: 3, inclu ...

Humpback welding machine year 1952 25 kW 500 V All data without gewaehr

8 piece welding pliers 1 piece welding control Manufacturer: Düring

Projection welding machine Year of construction: 1979 Manufacturer: Roth electric Type 126 P 125.4 Rated current at 50% ED: 16.0 kA Rated output at 50% ED: 160 k Nennspennung: 380V/50 Hz All information without guarantee

Machine type: welding rotary table Make: Merkle / Conzelmann Type CD 50/25 - 320 Connection voltage 1 x 230 V Speed range 0.25 – 2.5 rpm, infinitely variable Speed control 1 : 10 Torque 2.5 – 10 Nm Face plate diameter 250 mm Face plates - internal passage 10 mm Tilt angle of the face plate 135° Vertical load capacity 0.5 kN = 50 kg Table height 320 mm Tilting movement manual, clampable Tipping torque 90 Nm Pantograph 400 A 80 % d.c. Connection for - foot switch simple - Double foot switch - Foot remote control Age 3 years Condition: as good as new Weight 44 kg Warranty 24 months from the date of delivery Original price €2,198.00 + VAT Offer price €1,690.00 + VAT Foot switch simple with 3 mtr. cable 239.00 € + VAT 019.0.2900 Double foot switch with 3 mtr. cable 389.00 € + VAT 019.0.2901 Foot remote c ...

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...

Rated output at 50% ED: 25kVA Short circuit current: 14kA Electrode force: 220daN Throat depth: 455mm Arm distance, stufemlos: 168-443 mm Electrodes Cone: Mk1 --- Welding control: WS 402 (4-times, 2 program) --- Incl. additional options: -Foot switch -Main switch -3 m connection cable and Cekon-plug 32A --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

Rated output at 50% ED: 60kVA Short circuit current: 24kA Electrode force: 470daN / easy lift Throat depth: 435mm Arm distance, infinitely variable: 180-510 mm Electrodes Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: -Two hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock