136,838 used machines on RESALE, but how to find them? Machine Search
Serial number: 5120400010 incl. the hose package shown in the photos for all other welding data, see pictures Auction-ID: A7-49089-375
consisting of various welding torches with hoses Auction-ID: A7-49089-53
MIG-MAG welding machine EIC CVR 400-2 + wire feeder WFG 142. Manufacturer EIC (also distributed by CEBORA Cebotech). Power at 60% ED: 400 A / 34 V and power at 100% ED: 310 A / 31 V. MIG/MAG welding system with water cooling unit and WFG 142 wire feeder case. Shielded gas welding machine with connecting hose package, welding hose package with MIG-MAG welding torch, ground cable, wire roll 1.2 mm. Without gas cylinder.
MIG-MAG Welding Machine Messer Griesheim Euromag 50 to 500 Ampere with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 80 - 500 A. Welding voltage MIG 18 - 39 V. Max. welding current at: 60%ED 500 A. Max. welding current at: 100%ED 380 A. Water cooling. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG-MAG Welding Machine Messer Griesheim / EWM Euromag 50 to 500 Ampere – Shielded Gas Welding Machine - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source
MIG-MAG Welding Machine Knife Griesheim VARIOMIG 600-2 Welding current up to 600 amps with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 100- 600 A. Welding voltage MIG 19 - 40 V. Max. welding current at: 60%ED 600 A. Max. welding current at: 100%ED 450 A. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. Without wheels. MIG-MAG Welding Machine Messer Griesheim VARIOMIG 600-2 / EWM WEGA Drive4 – Shielded Gas Welding Machine Welding Current up to 600 Ampere - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source
MIG-MAG Welding Machine EWM Messer Griesheim VARIOMIG 600-2 Welding current up to 600 amps with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 100- 600 A. Welding voltage MIG 19 - 40 V. Max. welding current at: 60%ED 600 A. Max. welding current at: 100%ED 450 A. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG-MAG Welding Machine Messer Griesheim VARIOMIG 600-2 / EWM WEGA Drive4 – Shielded Gas Welding Machine Welding Current up to 600 Ampere - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source
Manufacturer: Trumpf Model: TruArc Weld 1000 Year: 2023 Condition: Used Stock number: 9392 Operating hours: 20 h Maximum arm reach: 1300 mm Number of axles: 6 pieces Source: Fronius TPS 320i C PULSE Rated current: 30 A Operating voltage: 24 V Machine weight: 2980 kg Height: 2818 mm Width: 2454 mm Length: 3605 mm The offer includes:, suction, Universal robot UR10e, Work table, Retractable partition wall, Linear axis, Protective cabin, Robot welding torches,
Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Ess, MIG-MAG shielded gas welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg
Welding machine Fabr. Migatronic Typ. Automig 273
volume capacity: - m³ / h total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90.0 Grad turning speeds: 0.2 - 2.5 U/min bore: 90.0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90.0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece dia.: 2-10 mm material: rust free/heat resistant steel: / welding process: 15-20 bolts /min at: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm Accessories: - 6 x Professional screw clamp, nitrided - 2 x stop and clamping angle 175 L nitrided - 10 x quick-clamping bolts without groove, double burnished - 8 x universal stop 225 L nitrided - 2 x stop and clamping bracket 500 G nitrided - 1 x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 530 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 22 mm weight: 740 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm Side panel height: 200 mm work height max.: 850 mm weight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding - Side panel holes in diagonal grid - Corners, edges and drill holes chamfered 45° - Construction reinforced with ribs - incl. basic foot equipment (working height 850 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1075 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm Accessories: - 6 x Professional screw clamp, nitrided - 2 x stop and clamping angle 175 L nitrided - 10 x quick-clamping bolts without groove, double burnished - 8 x universal stop 225 L nitrided - 2 x stop and clamping bracket 500 G nitrided - 1 x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 543 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 32 bore: 28 mm weight: 51,2 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 1200 mm table height: 150 mm bore: 22 mm weight: 395 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 420 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1300 mm table load: 7.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M24 Tilt Angle: 90-180-100 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 3.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 0,7-9,0 U/min Torque: 2,5-10 Nm table load capacity - central/maximum: 50 kg welding current: 400 A voltage: 230 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1100 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1000 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 416 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 715 mm table load: 500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-110 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 675 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 2000 mm table height: 200 mm bore: 28 mm weight: 1299 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 730 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm Side panel height: 200 mm work height max.: 850 mm weight: 850 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >> - high-quality steel S355J2+N + plasma nitriding - Side panel holes in diagonal grid - Corners, edges and drill holes chamfered 45° - Construction reinforced with ribs - incl. basic foot equipment (working height 850 mm) Accessories: - 6 x Professional screw clamp, nitrided - 12 x quick-release bolts without groove, double burnished - 8 x universal fence 225 L nitrided - 2 x stop and clamping bracket 175 L nitrided - 2 x stop and clamping angle 500 G nitrided - 1 x accessory set - Eccentric stop Ø 60 with M10 thread nitrided - Hexagon ...
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 843 kg Specifications - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Holes in 100×100 mm grid pattern - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing on side panel: 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups - Special equipment for welding tables is available on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 960 mm table load: 3.500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M20 Tilt Angle: 70-90-180 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 1.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 918 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current capacity: 42 kVA contact pressure capacity: 600 kp weight of the machine ca.: 170 kg dimensions: 1200 x 900 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 544 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 900 mm table load: 1.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1,1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-105 ° Tilting Speed: 30 sn min./90° dimensions: 2100x920x1100 mm weight of the machine ca.: 930 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1000 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 300 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 585 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mm weight: 86 kg 4-163400 Consisting of: - 10x Professional screw clamp, burnished/nitrided - 4x Professional screw clamp 45°/90°, burnished - 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided - 30x quick-release bolts without groove, double burnished - 8x universal stop 80 L, nitrided - 10x universal stop 115 L, nitrided - 10x stop and clamping angle 90 X, nitrided - 10x stop and clamping angle 90 L, nitrided - 4x stop and clamping angle 300 G, nitrided - 1x set of stop and clamping angles 250 G with rotating angle, nitrided - 1x set of stop and clamping angles 500 GK, nitrided - 1x tool trolley, powder-coated - 1x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 124 bore: 28 mm weight: 326 kg 4-283500 consisting of: - 14x Professional screw clamp - nitrided - - 10x Professional screw clamp 45°/90° - nitrided - 8x Prism Ø 50 135° with screwed-in collar - nitrided - 36x Quick-clamping bolts without groove, double - burnished - 8x magnetic clamping bolts 68 - aluminum - 12x universal stop 150 L - nitrided - 12x universal stop 225 L - nitrided - 4x universal stop 500 S - nitrided - 12x stop and clamping bracket 175 L - nitrided - 2x stop and clamping bracket 300 G - nitrided - 2x stop and clamping bracket 500 G - nitrided - 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided - 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracket Clamping bracket 750 G right - nitrided - 1x stop and clamping bracket 800 ...
table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm material thickness: ca. 24,5 - 27 mm : 200 mm weight: ca. 1.553 kg Product description: Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet. Welding table: - High-quality steel S355J2+N + plasma nitriding 200 - Holes surface 100x100 mm grid - Corners, edges, and holes 45° chamfered - Holes side panel in diagonal grid - Construction reinforced by ribs - Includes basic foot equipment (working height 850 mm) Accessories: - 6 x professional nitrided screw clamps - 12 x quick-release bolts without groove, double burnished - 8 x universal stop 225 L nitrided - 2 x stop and clamping angle 175 L nitrided - 2 x stop and clamping angle 500 G nitrided - 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided - Allen key size 6 - Brush Ø 30 with ...
table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
450 € 
