welding tig used for sale

Welding rod OERLIKON OE-2,000 5 Ni DIN 8559 ASME Sec.II/C/SFA-5.28 ER80S-NI2 Diameter: Ø 2.4 mm Length: 1000 mm Quantity: 24 kg New ! Dimensions: 1030 x 80 x 60 mm

MIG Stainless Steel Welding Wire PAGUS DT 1.4316 AWS 308LSi Diameter: Ø 1.0 mm coil K300 Quantity: 12 kg New ! Dimension: 300 x 300 x 105 mm

Wire electrode, welding wire, welding wire, cored wire -Welding wire: MIG welding wire type S-Al Mg 3 -Diameter: 1.2mm -Dimensions: Ø 300/100 mm -Weight roll: 7.4 kg

Inverter and holder for ultrasonic welding machine TELSONIC Ultrasonics SE-26/20-36kHz VK / max 500 W max. converter voltage: 1500 V with holder and pneumatic lowering stroke: 40 mm suitable for S840 and S842 used, tested ! Dimensions: 470 x 80 x 115 mm

MIG Aluminum Welding Wire ALCAN MT-AL 4043A ALSi5 3.2245 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm

MIG Aluminum Welding Wire MTC MT-MIGAL 1450 SG/AlMg 99.5 Ti 3.0805 Diameter: Ø 1.6mm Coil: K300 Quantity: 6kg New ! Dimensions: 300 x 110 x 310 mm

MIG Aluminum Welding Wire ALCAN MT-AL 5356 S-ALMg 5 3.3556 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm

Wire electrode, welding wire, welding wire -Manufacturer: Elga, protective gas wire electrode cored wire Elgacore DWA 50 Ø1.2 mm -Type: Elgacore DWA 50 Ø1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 5.1 kg

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 4.0 kg

MIG Aluminum Welding Wire ALCAN MT-AL 5183 S-ALMg 4.5 Mn 3.3548 Diameter: Ø 1.6 mm coil: Ø 300 mm Quantity: 6.5 kg New ! Dimensions: 310 x 110 x 320 mm

MIG Stainless Steel Welding Wire BÖHLER SAS4-IG Si 1.4576 Diameter: Ø 1.0 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

MIG Stainless Steel Welding Wire BÖHLER SAS2-IG 1.4551 Diameter: Ø 1.2 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

MIG Stainless Steel Welding Wire BÖHLER SAS4-IG 1.4576 Diameter: Ø 1.6 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight roll: 12.0 kg

Stainless Steel Welding Wire, MIG Wire Electrode, Solid Wire AVESTA 316LSI/SKRSI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.6 mm Coil: Ø 300 mm Quantity: 12 kg New ! Dimensions: 310 x 110 x 300 mm

Welding smoke filter, welding smoke extraction, soldering smoke extraction, mobile filter unit, welding smoke extractor -Manufacturer: Kemper, mobile welding fume extraction -Drive: 1.1 kW -Volume flow: 1000 m³/h -Extraction arm: Ø 150 mm x 3260 mm -Machine dimensions: 710/655/H1400 mm -Weight: 130 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 600 x 140 mm -Weight: 13.2 kg

Stainless Steel Welding Wire, MAG Wire Electrode AVESTA 316L-SI/SKR-SI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.0 mm Coil: K300 Quantity: 15 kg New ! Dimensions: 310 x 110 x 300 mm

MIG / MAG Welding Machine JUPITER MIG 230 230 A 400 V used ! Dimensions: 350 x 1000 x 700 mm

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 560 x 120 mm -Weight: 9.8 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 600 x 130 mm -Weight: 10,9 kg

Shielded Welding Wire OERLIKON CARBOFIL 1 R EN 440 - G 46 2 M G3 Si 1 Material: 1.0 5125 Diameter: Ø 1.2 mm Coil: Ø 500 mm Quantity: approx. 185 kg New !' Dimension: 500 x 500 x 320 mm

Cooling Module for Welding Machines, Convection Cooling Module for Water-Cooled Welding Machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.2 m -water cooled -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg

Medium Frequency Welding Inverter, Welding Inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 GK100LS105 1070086966-102 100 A 400 V with control cabinet ! also without cabinet SG266 ! Dimensions: 800 x 450 x 450 mm

Welding converter, DC welding machine, welding transformer ELIN SWA 304 P 7.5 kW 25 - 300 A 220 - 500 V 3AC used ! Dimensions: 1000 x 600 x 840 mm

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg

Medium Frequency Welding Inverter, Welding Inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 110 A 400...480 V also with cabinet SG265 ! Dimensions: 465 x 315 x 320 mm

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg

Ground cable for shielding gas device, electrode device, stud welding device -Welding cable: extension / connection cable -Length: 8.0 m -Connector: 5-pin -Transport dimensions: 460/450/H80 mm -Weight: 3.8 kg

Welding Machine VEM, SCHRÖDER Welding Rectifier: RGSa 315.1 Wire Feeder: DVG 400 electronic Year: 1977 / 2001 50 - 315 A 220 / 380 V used, tested ! Dimensions: 800 x 600 x 1400 mm

table load: 150 kg weight of the machine ca.: 250 kg dimensions of the machine ca.: 800 x 700 x 950 mm Exhibit Machine Producer: BENDMAK Type: SRP 015 Load capacity: 150 kg Load center: 100 mm Eccentricity: 100 mm Rotation of the turntable: 360° Strongest inclination: 90° Input Power: 380 V Rotary motor: 0,18 kW tilt motor: 0,25 kW Speed: 1,4 m/min Slew: 30 sek. Table-Ø: 500 mm T-Slots: 5-72 Height in horizontal rotation: 700 mm Dimensions: Height: 950 mm Length: 800 mm Width: 700 mm Weight: ca. 250 kg Earthing: 300 Amp. Additional information: - adjustable speeds - control panel with 5 m cable - digital speed indicator on the control panel for monitoring the rotation - weld grounding mechanism - mechanical angle indicator - engine brake with air cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ground cable for shielding gas device, electrode device, stud welding device -Welding cable: extension / connection cable -Length: 10.0 m -Connector: 14/8-pin, see photos -Cable coupling: DIX SK 70 -Transport dimensions: 460/450/H80 mm -Weight: 9.2 kg

welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg

Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Welding machine, welding rectifier, jump starter, battery starter, charger VISZEK TIRISZTAR 24 SV built: 1988 charging current: max. 63 A < < br />jump start: max. 400 Abr /> welding current: max 130 A 9 kW 380 V 3AC used, checked! without batteries ! Dimensions: 820 x 520 x 940 mm

Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Welding iron -Welding bar: for welding plastics, from mask manufacturing machine -Thermal panels/air nozzles: 2 each -Dimensions: see photos -Number: 3x hangers available Price: per piece -Dimensions: 240/100/H55 mm -Weight: 0.7 kg/pc.

welding manipulator, welding turntable, welding table HEINRICHSGLÜCK H50 payload: 5000 kg clamping plate: 1200 x 1200 mm 360° rotatable ca 110° tiltable 380 V used, tested ! Dimensions: 1500 x 2800 x 1700 mm

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Hot gas welding machine, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New !' Dimensions: 470 x 200 x 50 mm

2012 BEAM MATIC LM4 Starmatic 1003 AC / DC Submerged arc welding system for sale, second hand. Already dismantled and stored Find more here - / Contact us at -

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Thermal Arc, TIG welding machine, inverter welding machine type LS-300 -Welding power: max. 300 A -ground cable -Dimensions: 410/210/H435 mm -Weight: 21.1 kg

Welding robot great working condition Find more here - / Contact us at -

2014 KOCEVAR & SONS R-94-K0LQ-320/750-DD160 Find more here - / Contact us at -

Ultrasonic welding machine for the production of thermal solar absorbers Dimensions and Material Specifications: - Pipe Diameter Options: 8, 10, 12, or 15 mm - Material Thickness: - Copper Sheet: 0.12 to 0.5 mm - Aluminum Sheet: 0.3 to 0.5 mm - Sheet Width: Up to 200 mm - Programmable Welding Length: 1 mm to 9999 mm or continuous - Overall Height: 1250 mm - Overall Depth / Width: 1100 mm / 900 mm - Table Height: Adjustable to 900 mm - Total Weight: Approximately 150 kg Electrical and Pneumatic Requirements: - Supply Voltage: 230V | 50Hz - Power Consumption: Maximum 3500 VA - Compressed Air Supply: Minimum 300 liters/min at 8 bar, clean and dry Performance and Features: - Mechanical Repeatability: Less than 0.2 mm - CNC Module: B&R with CAN-BUS connection for frequency inverter - Memory: 128 MB CF card for programs - Interfaces: - 1 x RS 232 - 1 x USB - 1 x Ethernet - Control Panel: ...

Ground cable for MIG/MAG welding machine, electrode welding machine, welding cable extension, MMA welding cable -Welding cable: Ground cable for MIG/MAG welding machine, electrode welding machine -Version: Dinse plug -Length: 10 meters -Weight: 5.7 kg