used Welding Robots for sale

Cell with welding robot ABB IRB 1400, table 2 pallets Built: 2001 Control: CNC ABB Country of origin: Sweden Max arm area: 1 440 mm Max payload: 5 kg Welding source: KEMPPI 520 R Power from the welding source: 520 A

Welding cell with robot ABB IRB 1400 M98, rotary table 2-paltten Built: 1998 Control: CNC ABB Country of origin: Sweden 6-axis Max arm area: 1 440 mm Max payload: 5 kg

Cell with welding robot ABB IRB 1600, table 2 pallets Built: 2006 Control: CNC ABB Country of origin: Sweden Max arm area: 1 200 mm Welding source: KEMPPI 520 R Reading of the welding machine: 520 A

Welding robot ABB IRB 2400L with welding source Fronius Year of construction: 2000 Arm range: 1800 mm Control: ABB S4C Plus Source: Fronius TransPuls Synergic 4000 Fitted with FRONIUS wire feeder Payload: 7 kg Weight: 380 kg 6 axes Axis range Axis 1 ±360 degrees Axis 2 ±200 degrees Axis 3 ± 125 degrees Axis 4 ±370 degrees Axis 5 ±240 degrees Axis 6 ±800 degrees

Robot ABB IRB 2400L (2000) Year of construction: 2000 Payload: 7 kg Max arm range: 1800 mm Weight: 380 kg Control: ABB S4C Plus 6 axes Axis range Axis 1 ± 360 degrees Axis 2 ± 200 degrees Axis 3 ± 125 degrees Axis 4 ± 370 degrees 5 axes ± 240 degrees Axis 6 ± 800 degrees equipped with a FRONIUS wire feeder 2 pieces available

Wave soldering machine make ATF type 20-33Year 1995, make -No: 0352330795Fluxer (spray fluxer)Compressed air consumption approx. 80 l / min depending on the setting.process width: 330 mmFluxer (foam fluxer)Compressed air consumption approx. 60 l / min depending on the setting.Process width: 330 mmMax. Flux capacity: 4.0 lMax. Foam height: 12 mmpreheatingRadiator per machine: 8Power consumption: 4.0 / 7.9 kWTemperature range Ambient temperature: -300 ° CTemperature sensor: Type J Fe-CuNisolder potPump motor: 24 V DC 1.3 AMax. Soldering temperature: 30 ° CHeating elements: 9 x 500 WHeating time approx: 2.0 hoursTemperature sensor: Type J Fe-CuNiLot quantity: 220 kgconveyor beltMax. PCB size: 335 x 420 mmDrive motor: 24 V DC 1.5 ABelt speed: 0 - 2.5 m / min.adjustable transport angle: 5 - 9 °Max. Process height: 120 mmSpecification machineDimensions approx: 1600 x 1000 x 1360 mmExtracti ...

Inv. Num. : 7048 Type:- Producer: CLOOS Created: GO 2019 Parameters: Maximum load capacity: 500 kg Clamping length between flanges: 1500 mm

Inv. Num. : 5559 Type: ARC Mate 100iB Producer: Fanuc Created: 2007 Parameters: Control system: FANUC SYSTEM R-30iA Duty cycle: 2000 h Maximum arm reach: 1373 mm Number of axles: 6 pieces Maximum load capacity: 6 kg Source: MIGATRONIC FLEX 4000 Nominal current: 7 A Accuracy: 0.08 mm Machine weight: 135 kg External Wire Feeder Cleaning station Base Control panel and control panel Simple table design

Welding robot FANUC R-2000iA/165F Built: 2001 Control: CNC R-J3iB 6-axis Max arm area: 2 650 mm Max payload: 165 kg Country of origin: Japan You can buy the robot without the welding head

Welding robot FANUC S-430iW Built: 2000 Control: CNC R-J3 6-axis Max arm area: 2 643 mm Max payload: 165 kg Country of origin: Japan You can buy the robot without the welding head

Induction soldering machine FDF Fritz DusseldorfBuilt in 1990 consisting of:1.) Soldering table type LT No. 25-18080.90 built in 1990with 1 lifting station projection: 400 mmDistance table - soldering unit: 650 mmelec. Connection: 380 V, 63 AConnected load: 35 kVADimensions: 1600 x 1200 x 1900 mm2.) Stationary parallel resonant circuit inverter type PSU 30-10Fabr. -No: 65.18601-90Max. Power: 30 kWFrequency range: 8 - 10 kHZConnected load: 41 kVAelectrical connection: 380 VDimensions: 1100 x 1100 x 2200 mm3.) Refrigeration unit VICARB Germany, built in 1987Machine -No: D 1044Operating pressure: 10 barPower: 56 kWWeight approx .: 186 kgDimensions: 1200 x 1200 x 1030 mmTotal operating time so far: 7770 operating hoursequipped with:- adjustable heating time- adjustable heating cycles- adjustable pause timelittle used, in good conditionPrice on request.Delivery: ex warehouse or location fre ...

Ref. -No.: 10196Manufacturer: HYUNDAIYear of construction: 2008Storage location: HalberstadtCountry of origin: Südkoreaserial number: HB5-0156-440

Welding robot make KUKA type KR 6 ARCYear of construction 2008Technical specifications:Load capacity 6.0 kgNumber of axles 6Repeatability +-0.1mmMax Reach 1823.5mmWeight around 235 KGWith- Control KR C2used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Inv. Num. : 1748 Type: KR5si5xx R850 Producer: KUKA Created: 2008

--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + S5-RoboMIG XT - Collaborative MIG-MAG welding - Welding machine: S5 RoboMIG XT Cobot - Incl. FullProcess: All Lorch SpeedProcesses included SAY GOODBYE TO SKILLS SHORTAGES, COST PRESSURES AND TECHNOLOGICAL GAPS With Lorch Cobot Welding Solutions, you can relieve your employees and increase productivity and profitability by optimizing the use of your human resources. Reduce waste, rework, and costs with consistent performance and reproducible results of the highest quality. Stay future-proof and position yourself as an attractive employer for young, tech-savvy talents with this practical step towards Industry 4.0. REPRODUCIBLE PERFECT ...

--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + V 30 AC-DC - Collaborative TIG welding - Welding machine: V30 AC-DC Cobot - Optional: digitally fully integrated cold wire feed EASY PROGRAMMING With the free-drive function, welders show the cobot where it should weld by hand – including intermediate waypoints and sections. Operators can then perform the tasks precisely with the help of the robot. The optional multifunction flange also allows programming directly on the 6th robot joint to avoid unnecessary walking distances. SECURE AND FLEXIBLE The safety concept consisting of laser and function probe ensures that the operator is not within the radius of movement of the robot arm ...

current capacity: - kVAnumber of controlled axis: - workpiece weight: - kgWelding robot with 2 turning tablesCategory: Robots/Automation2 tables, each 1800 x 550 mm6-axis robot + turning table and travel pathBurner cleaning BinzelPower source Fronius Transpuls Synergic 4000 including water coolingNot operational (in need of repair, spare parts carrier or forRestore - servo axis 7+8 report errors)Sale ex site (without dismantling)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cell with welding robot (MIG) Motoman YR-MA01400-A00 Cell with welding robot (MIG) Yaskawa - Year of construction: 2010 - 6-schsen robot Motoman YR-MA01400-A00, - Source: Motoweld EL350 III - Positioner Yaskawa 2 pcs.. - Dimensions of the cell: 3300 mm x 3000 mm x 2400 mm - Control Motoman DX 100 - Weight: 2.5 t

Powered by a reliable FRONIUS TransPuls Synergic 4000 power source, the robotic welding station enables efficient MIG/MAG welding in all positions and ensures low operating costs. The industrial robot located in the welding cell, thanks to its high repeatability of positioning and stability, is able to guarantee the highest quality and precision of welding. A robust body with a 1500 mm reach arm, combined with six high-speed axes, contributes to a significant reduction in production cycles. The welding cell consists of: industrial robot: REIS RV 10-6 RSV, FRONIUS TransPuls Synergic 4000 welding source with a capacity of 400 A (50%), 365 A (60%), 320 A (100%), SRM 100 rotary table with a lifting capacity of 100 kg and dimensions of 1200 x 750 mm each, cooler, control cabinet, user manual in Polish and German. Technical Specifications: number of axles: 6 arm reach: 1500 mm maximum lo ...

Welding robot robot FANUC 100i OConstruction year: 1998 Country of origin: Japan Axis range: J1: +/-165° J2: +135 -75° J3: +150 -149° J4: +/-190° J5: +/-140° J6: +/-320° Max arm area: 1 368 mm Pallet: 850 x 810 mm Power source: OTC Max payload: 6 kg Control: CNC SYSTEM R-J2

current capacity: 25 kVAnumber of controlled axis: 6 workpiece weight: 10 kgweight of the machine ca.: 1,55 tYear of construction 2020 demonstration machine, as newEasy ARC 01.02 FD-B6 Welbee P500L welding robot stationMIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6with welding table 2000x1200mmHole diameter 28 mmThe mobile welding cell for the craft businessSetting range MIG / MAG 20 - 500 ASteplessly adjustable switching levelsDuty cycle at max.current 40 ° C 50%Current at 100% ED 40 ° C 410 AWire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AS GOOD AS NEW with approx. 200 working hours DEMONSTRATION MODEL

Inv. Num. : 6619 Type: SONIX 0510i – H Producer: YUDO-STAR Created: 2012 Parameters: Axis X: 2500 mm Axis Y: 660 mm Z axis: 1000 mm Number of axles: 3 pieces Load capacity in the 3rd axis: 8 kg Equipment: 2x Vacuum Touch screen