welding machine used for sale

Rofin Tool Open Laser Welding Machine 150 W All maintenance has been done Lamps have been changed recently

2 Head PVC Welding Machine

Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003

Welding machine for joining rods/wires min: 3mm - max: 7mm 380V III; 4Kva - 18kVA DOCUMENTATION AVAILABLE

Schweissmaschine - Electrode welding machine DECA TURBO 260 SB -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

RoyalKraft IGBT-N350 welding machine; unused

RoyalKraft IGBT-N350 welding machine; unused

4-in-1 mobile workstation with 5.5 kVA power generator with 230 Volt outlet, small/large (= function 1), welding machine with 200 Ampere current (= function 2); 1.35 kW air compressor, 10 litre tank capacity, 8 Bar (= function 3); Extendable telescopic light tower, mast height max. 450 cm, light pole (= function 4). equipped with 420 cm3 petrol engine; electric start + pull start; comes with a 12 Volt starter battery; unused

Lastek Lastimig 300 welding machine; mobile

- Various workshop tools and power tools of various brands (Bosch, Parkside, etc.) with batteries and chargers, Beta tool trolley - 1 compressor 100 Lt - 1 Telwin brand welding machine.

From an operational resolution: Medium-frequency resistance welding machine from EST-Dresden Model 6121 N-S Year of construction 2017 Mach.Nr.00481 Control of Tecna 810mm projection 600kg weight external cooling DTE K 0036 Dimensions in mm approx. 1950x1700x380 Performance see photo

Time control for spot welding machine PGH FUNKTECHNIK DRESDEN EZ 6/1 channels: 4 switching stages: 20 per channel 220 V 50 Hz used, tested ! Dimensions: 360 x 280 x 160 mm

Description: KOPR SK258 Projection Welding Machine Approx. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 1,800 mm, weight approx.: 1,500 kg

Tabletop welding machine HAWO HD 260, 230 V, with knife, plus 2 original rolls 100 mm x 100 m and 1 roll 75 mm x 200 m, operating instructions, function-tested

Description: Portable Welding Machine  , Approx. Onsite Dimension. (l x w x h): 270 x 400 x 300 mm, weight approx.: 10 kg

full line for mesh up to 6 m

see picture attached

Rated output at 50% ED: 63kVA Short circuit current: 31, 5kA Eletrodenkraft: 100-600daN / EH Projection: 250-550mm --- Control: MPS 10 (5 times, 8-program) --- incl. additional options: -Foot switch "unpowered setting up" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 100kVA Short circuit current: 41, 5kA Eletrodenkraft: 100-600daN / DH Projection: 350-650mm --- Control: MPS 200multiR1 (8 times, 8-program) --- incl. additional options: -Foot switch -Double stroke cylinder -Flow switch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Wire diameter range: 1.0 - 5.0 mm Ring diameter: 80 - 600 mm feed insert: max. 10,000 mm Power: 12 - 30 rings/min Welding capacity: max. 10 kVA with gluedevice; ready for use

wire diameter range: 1,0 - 5,0 mm ring diameter range: 80 - 600 mm wire feeding length: max. 10.000 mm output: 12 - 30 rings/min welding capacity: max. 10 kVA with annealing unit; ready for operation

Wire diameter range: 1.0 - 5.0 mm Ring diameter: 80 - 600 (1,000 mm) feed load: max. 10,000 mm power: 12 - 30 rings/min Welding capacity: 10 kVA; ready for use

wire diameter range: 1,0 - 5,0 mm ringdiameter: 80 - 600 (1.000 mm) wire feeding length: max. 10.000 mm output: 12 - 30 rings/min welding capacity: 10 kVA; ready for operation

Connection - 380 V, 50 Hz, control voltage 24 V, output at 100% ED 3.5 kVA, Btto 235 kg, more tech. Info from nameplate

Rated output at 50% ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN / easy lift Projection: 350-650mm --- Welding control: MPS 10 (5 times, 8-program) --- Incl. additional options: -Flow switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 25kVA Short circuit current: 14kA Electrode force: 220daN Throat depth: 455mm Arm distance, stufemlos: 168-443 mm Electrodes Cone: Mk1 --- Welding control: WS 402 (4-times, 2 program) --- Incl. additional options: -Foot switch -Main switch -3 m connection cable and Cekon-plug 32A --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 60kVA Short circuit current: 24kA Electrode force: 470daN / easy lift Throat depth: 435mm Arm distance, infinitely variable: 180-510 mm Electrodes Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: -Two hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Technical data: -5 x good plate surface, 2 x good plate with hole -Mounting plate - length approx. 1485 mm -Width approx. 990 mm -Plate thickness 50 mm -Plate thickness with ribbing 115 mm -Height adjustable in height approx. 880 mm - plate frame -4 T - longitudinal grooves L 1485 mm -Distance between the grooves 250 mm -Sliding distance from outer edge 120 mm -Keyway width approx. 17 / 38 mm -Groove depth approx. 40 mm -Weight approx. 950 kg -Space requirement approx. L T 1485 x 990 x H 880 mm

Technical data: -Capacity approx. 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, type 6 PTF, BJ. 97 - space requirement approx. B H 1100 x 1300 X 1600 mm -Weight approx. 300 kg

Technical data: -max load capacity 300 kg -maximum clamping diameter approx. 1500 mm -Chuck diameter 300 mm -Bore hollow shaft approx. 60 mm -Rotation Electr. infinitely variable - right - + links - course -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 800 x 1150 x D 700 mm -Weight approx. 500 kg

Rated output at 50% ED: 4kVA Clamping force: 200daN Compressive strength: 80daN --- Incl. additional options: -Post annealing equipment -Trolley -Grinding machine for deburring --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Total power: 6.5-12 kW Machine weight: 160 kg Dimensions (W x D x H): 0.9 x 0.8 x 1.1 m Condition: good, ready for operation Arm 350 mm with cooling Welding time adjustable U = 1,2-2,2, CHF 50 Input a phase 220 V, I = 29 A

Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

Induction soldering machine FDF Fritz DusseldorfBuilt in 1990 consisting of:1.) Soldering table type LT No. 25-18080.90 built in 1990with 1 lifting station projection: 400 mmDistance table - soldering unit: 650 mmelec. Connection: 380 V, 63 AConnected load: 35 kVADimensions: 1600 x 1200 x 1900 mm2.) Stationary parallel resonant circuit inverter type PSU 30-10Fabr. -No: 65.18601-90Max. Power: 30 kWFrequency range: 8 - 10 kHZConnected load: 41 kVAelectrical connection: 380 VDimensions: 1100 x 1100 x 2200 mm3.) Refrigeration unit VICARB Germany, built in 1987Machine -No: D 1044Operating pressure: 10 barPower: 56 kWWeight approx .: 186 kgDimensions: 1200 x 1200 x 1030 mmTotal operating time so far: 7770 operating hoursequipped with:- adjustable heating time- adjustable heating cycles- adjustable pause timelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free  ...

Wave soldering machine make ATF type 20-33Year 1995, make -No: 0352330795Fluxer (spray fluxer)Compressed air consumption approx. 80 l / min depending on the setting.process width: 330 mmFluxer (foam fluxer)Compressed air consumption approx. 60 l / min depending on the setting.Process width: 330 mmMax. Flux capacity: 4.0 lMax. Foam height: 12 mmpreheatingRadiator per machine: 8Power consumption: 4.0 / 7.9 kWTemperature range Ambient temperature: -300 ° CTemperature sensor: Type J Fe-CuNisolder potPump motor: 24 V DC 1.3 AMax. Soldering temperature: 30 ° CHeating elements: 9 x 500 WHeating time approx: 2.0 hoursTemperature sensor: Type J Fe-CuNiLot quantity: 220 kgconveyor beltMax. PCB size: 335 x 420 mmDrive motor: 24 V DC 1.5 ABelt speed: 0 - 2.5 m / min.adjustable transport angle: 5 - 9 °Max. Process height: 120 mmSpecification machineDimensions approx: 1600 x 1000 x 1360 mmExtractio ...

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

Qty. 1 Second-hand tube welding production plant Mfc.: Woosung Machine Built: 2014 Strip width: 190, 320, 400 mm Thickness: 1.2 – 4.0 mm Tube dia.: 60.5, 101.6, 127 mm Tube length: max. 6.0 m Scope of supply: Tube mill line – dia. 60.5 mm Tube mill line – dia. 101.6 mm Tube mill line – dia. 127 mm Roll straightener – dia. 25.4 mm Roll straightener – 50.8 mm Roll straightener – dia. 127 mm

Ultrasonic welding system used as spare part carrier with at least 30 single-welded pneumatic feed cylinder solder cylinder sands and clamps

Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

- max welding current: 200 A - max welding voltage: 27 V - Total power: 10.6 kW - Machine weight: 88 kg - Weight wire feed unit: 17 kg - Space requirement (W x D x H): 376 x 684 x 381 mm Details with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version is manual power source

Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

specifications: - Rated power at 50% ED 25 kVA - max. Welding power 107 kVA - Discharge adjustable 140 - 300 mm - Welding values - steel sheet 6 + 6 mm - Brass sheet 3 + 3 mm - Alublech 1.2 + 1.2 mm - Electrode force adjustable - Control DALEX 1 - 01 TT - Foot button - Cooling water quantity 8 l/min - Drive 380 V - Space requirement approx. W 670 x H 1250 x D 1550 mm - Weight approx. 240 kg

Sheet thickness max 50 mm Angular speed 3 m/min. Power 3 PK Country of origin Spain Machine Weight 60 kg Machine LxWxH 50 x 50 x 50 cm

Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...

Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 €  ...

Machine type bolt welding system Make SOYER Type BMS-8N Connection voltage 1 x 230 volts Welding range M 3 – M 8 3 – 7.1 mm Ø Material steel, stainless steel, Aluminium, brass Welding process peak ignition According to DVS leaflet 0903 Current setting infinitely variable Welding time 1,000 – 3,000 ms Welding sequence 20 bolts / min., depending on the bolt diameter Pistol positioning welding pistol Dimensions W x H x D 320 x 300 x 120 mm Hedging 16 amps Weight 10 kg Age 12 months Condition workshop tested, as new, incl. UVV test report Scope of delivery bolt welding device with the following accessories: 1 piece welding gun PS-1K 2 pieces ground cable 3 mtr. long 1 piece transport case 1 piece user manual Warranty 24 months from the date of delivery List original price 2.490,00 € + VAT Price kpl. with above a ...

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

ESAB LAE 800 welding device The machine is located in France.