We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,108 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
including accessories; unused in box
used
used
Equipped with various welding accessories, bottles not included
used
without welding cable set
used
IGBT Technology, 200A inverter with digital display
used
used
X-travel: 500mm, y-travel: 275mm, z-travel: 300mm, max. feed rate: 15m/min, max. laser power: 700W, clamping stroke: 4mm, control: HEIDENHAIN TNC 407.
used
Rated power: 50-125kVA, throat depth: 350-750mm, arm distance: 240-500mm.
used
There are six welding machines available, including control cabinets, without documentation.
used
Electrode force: 900daN, nominal power: 80kVA, without accessories.
used
Max. electrode force: 12.7kN, nominal power: 3x 80kVA.
used
Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2.
used
There are two identical machines available, connected load: 120kVA, weight: 172kg.
used
Max. air pressure: 10bar, without documentation.
used
Electrode force: 736daN, connected load: 90-300kVA, weight: 178kg.
used
Controls: DALEX RS 15.
used
Arm length: 550mm, max. welding power: 136kVA, length: 640mm, width: 930mm, height: 1550mm, weight: 290kg.
used
Max. electrode force: 5600N, nominal output: 130kVA, connected load: 324kVA, weight: 630kg.
used
Max. electrode force: 260kp, nominal output: 150kVA, connected load: 620kVA, weight: 1.1t.
used
Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.
used
Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.
used
The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition.
used
X-travel: 800mm, y-travel: 500mm, z-travel: 400mm, working height: 980mm, turntable diameter: 900mm, connected load: 12.5kW, control: Siemens Sinumerik 840D, length: 2710mm, width: 1815mm, height: 2645mm, weight: 1.86t, weight control cabinet: 300kg, with documentation, an on-site inspection is possible.
used
With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible.
used
Length: 1500mm, width: 1300mm, height: 1500mm, weight: 350kg, including electrodes and cooling unit, without documentation, an on-site inspection is possible.
used
Length: 1500mm, width: 1300mm, height: 1500mm, weight: 450kg, including electrodes and cooling unit, without documentation, on-site inspection is possible.
used
Electrode force: 900daN, length: 1500mm, width: 1200mm, height: 1800mm, weight: 720kg, on-site inspection is possible, with refrigeration unit, tools and documentation, has been regularly serviced.
used
Welding capacity: 504kVA, connected load: 90-125kVA, weight: 588kg, without cooling unit, on-site inspection is possible.
used
Welding rectifier: A10-355K, welding process: MIG/MAG, power connection: 3-phase, 220/380V, 50 Hz or 220V, 60 Hz, output range: 50A/15V to 355A/29V. Duty cycle: 355A/29V at 20%, 315A/30V at 60%, 280A/28V at 80%, 250A/27V at 100%. Open-circuit voltage: 17-39V, current at 220V: 41A at 50%, 34A at 60%. Current at 380V: 24A at 50%, 20A at 60%, weight: 175kg.
used
Generator power: 10kW, with documentation.
used
Connected load: 2000W, weight: 80kg.
used
Connected load: 2.5kW, controls: Siemens SIMATIC, weight: 80kg, with instruction manual.
used
Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm.
used
Inv. Num. : 7355 Type: Tetrix 352 AC/DC Producer: EMW Generated:- Parameters: Switch-on hours: 33 h Operating hours: 10 h Machine weight: 177 kg Height: 1250 mm Width: 375 mm Length: 780 mm
used
Guide welding occasion Portico: Length: 4 meters Head movement by rack and pinion. Speed: Variable speed drive for regulating the movement of the car on the gantry. Torch height: Adjustable by GULLCO guide. Welding equipment: Brand: PRAXAIR - EWM Model: Integral MIG 500 Pulse Gear factor: - 60% - 500A - 100% - 400A Joint follower: Brand: Praxair Model: Super-Guide WSG 1100 2 axes.
used
Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence
used
Inv. Num. : 6133 Type: PW 75/5 Producer: PROFIWELD Created: 2015 Parameters: Connection voltage: 480 V Power: 75 kVA Pressure: 0.6 MPa Cooling water flow: 12 l/min Frequency: 50/60 Hz
used
Description: Machine number: 308 With digital control MPS200 Approx. Onsite Dimension. (l x w x h): 1,200 x 850 x 1,800 mm, weight approx.: 1,000 kg
used
Description: For all other technical welding data, see photographed type plate Incl. the hose packages shown in the photos Attention: without the gas cylinder shown in the photos weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,000 mm
used
Description: For all other technical welding data, see photographed rating plate weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 900 x 420 x 600 mm
used
One used SCHLATTER MG330 high performance mesh welding line for standard mesh in sheets Actual production output: 100t/shift Very complete with line wire pay offs, automatic tying system and many extras
used
Power source for orbital welder MESSER GRIESHEIM - POLYSOUDE PS204 Water Cooling for Orbital Welder MESSER GRIESHEIM - POLYSOUDE RC200 without accessories available multiple times Price for a set consisting of 1x power source and 1x water cooling 1.900,-- EUR net, free loaded.; used
used
used
Fiber Laser welder 1 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported.
used
Fiber Laser welder 1,5 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Manual laser welding devices with optical fiber laser emitters are the latest development in the field of welding technologies, which replaced argon arc welding. They are used for welding such metals as stainless steel, iron, aluminum and other metals.
used
Description: Serial number: 9409975ILA For technical data see photographed type plate Control: ELMATECH digital control With foot switch Power: 20 kVA medium frequency Approx. Onsite Dimension. (l x w x h): 1,100 x 1,300 x 1,600 mm, weight approx.: 350 kg
used
From an operational resolution: Victor Thermal Dynamics Cutmaster 40mm 30-120 amps of power 120Amps at 40% ED 80Amps at 100% ED 40mm quality cut 50mm separating cut Air consumption 190l/min Serial No.MX1928048535 Hose package 6meter Torch SL 100 extra toggle switch for 4-stroke (continuous operation) installed Weight 28kg 380Volt Bn2u828m with trolley
used
Specifications: - Nominal power at 50% ED 16 kVA -Max. Welding capacity 45 kVA - Projection adjustable 180 - 500 mm - Welding values - sheet steel 4 + 4 mm - Brass sheet 1.2 + 1.2 mm - Aluminum sheet 1 + 1 mm - Electrode force adjustable 17 - 278 daN -Mot. Cooling water system - Cooling water volume approx. 8 l/min - Control for power time, etc. - Drive 400 V - Space requirement approx. W 480 x H 1300 x D 1100 mm - Weight approx. 200 kg
used
Description: serial number: 5597 weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 500 x 1,300 mm
used
Fiber Laser welder 3 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ℃ ...