135,533 used machines on RESALE, but how to find them? Machine Search
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 913 kg 280030.XD7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1860 m³/h : Pressung 2.900 Pa : 1,1 kW filter surface area: 10 m² : 72 dB(A) : 400/50 V/Hz : 665 x 1100 x 1495 mm : 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class W3 (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good clean ...
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table load: 1000 kg table diameter: 900 mm turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 900 mm table load: 1 t swivelling range: 0-135 Grad excentricity: 200 mm table turning speeds: 0,12 - 1,2 U/min Torque: 2000 N/m total power requirement: 0,75 kW dimensions of the machine ca.: 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...
: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kW volume capacity: 20.000 m³/h weight: 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter are ...
WIDOS HT 1500 CNC ist eine Kunststoffschweißmaschine von hoher Präzision, ausgelegt für zuverlässige und hochgenaue Schweißarbeiten. Angaben zu Arbeitskapazitäten (Durchmesser, Module, Verfahrwege, Werkstückmaße) liegen nicht vor. Haupttechnische Daten: Leistung der Heizung 2 kW; Anschluss 50 Hz, 3x 230 V; Maschinengewicht ca. 104 kg; Abmessungen L 880 x B 810 x H 700 mm. Wichtige Ausrüstung: elektronisches Handbedienpult, Spannwerkzeug, Satz Reduktionsspanneinsätze, Schnittstellenkarte PCMCIA, Transportkoffer. Gewährleistet enge Toleranzen und eignet sich für präzisionsorientierte Bereiche wie Automotive, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr
Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Donaldson Torit, mobile welding fume extraction / dust collector type PT 1000 -Drive: 1.1 kW -Max. volume flow: 1100 m³/h -Extraction arm: Ø 165 mm x 2210 mm -Transport dimensions: 1200/620/H1645 mm -Weight: 105 kg
PRODUCT (PROFILE, TUBE) external diameter min.: 25 mm external diameter max.: 76 mm wall thickness min.: 0.7 mm wall thickness max.: 3.25 mm LINE CHARACTERISTICS welding process: HF inductive sawing process: travelling speed max.: 100 m/min ELECTRICAL SPECIFICATIONS mains power supply: 680 kVA Technical data & highlights: System length: approx. 130 m Staff requirements: 6 employees for operation Welding process: High-frequency welding up to 400 kHz Induction welding process: Power up to 250 kW Advantages: Robust and reliable design – suitable for continuous industrial operation Precise welding quality thanks to state-of-the-art high-frequency technology Ideal for manufacturing pipes in various dimensions -Pipe welding machine: Abbey Etna -Strip processing + saw VAi Seuthe -Rolling mill Carl Wetzel -Induction welding system: Rittal SK3215.100, built in 2 ...
Manufacturer and model: iDEAL BAS 050-11 Rated power (ED 50%): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Maximum compression force: 2.2 kN Iisc Hq E Rrszqdkxjvef Machine weight: approx. 180 kg Hydraulic tensioning, operated via foot switch Pyrometer (GTR): yes (temperature display on the touch panel) Connection voltage: 380 – 419 V Bi-metal/carbide saw blades: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Blade dimensions: 6×0.4 – 30×0.6 mm Blade steel S235JR: max. cross-section 75 mm² Blade steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: The integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. The target temperature is pre-defined in a recipe and displayed on the panel – the annealing cycle en ...
Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 515/160/H115 mm -Weight: 18.9 kg
Input Voltage: 230V~50Hz Welding Current Range: 20-330A No-load Voltage: 60V Maximum Current Draw: 55A Effective Current Draw: 45A Duty Cycle: 40% 330A, 100% 202A Electrode Size: 1.6-4.0mm Auction-ID: A7-49495-192
Input Voltage: 230V~50Hz Welding Current Range: 20-330A No-load Voltage: 60V Maximum Current Draw: 55A Effective Current Draw: 45A Duty Cycle: 40% 330A, 100% 202A Electrode Size: 1.6-4.0mm Auction-ID: A7-49495-92
The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low spark formation, high duty cycle Auction-ID: A7-49495-86
The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low spark formation, high duty cycle Auction-ID: A7-49495-286
Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-49495-171
The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low spark formation, high duty cycle Auction-ID: A7-49495-186
Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-49495-271
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-49495-305
Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-49495-71
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-49495-334
Input Voltage: 230V~50Hz Welding Current Range: 20-330A No-load Voltage: 60V Maximum Current Draw: 55A Effective Current Draw: 45A Duty Cycle: 40% 330A, 100% 202A Electrode Size: 1.6-4.0mm Auction-ID: A7-49495-292
CONTROLS electronic controls SITEC/TRUMPF system: - Laser welding system with rotary table, 2 units per side - Laser welding with Trumpf BEO D 70 welding optics - Beam guidance via laser light cable (LLK) - Inline laser monitoring system for weld seam monitoring - Weld penetration depth: 1.5 mm - Shielding gas welding possible! For aluminum or stainless steel
table length: 2400 mm table width: 1200 mm table height: 880 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Siegmund Schweißtisch 16er Maße: 2000 x 1000mm Lochung 16mm Plasmanitriert Auf Rollen Inkl. Zubehör
table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: KUKA Model: KR 5 ARC Year: 2014 Condition: Used Stock number: 9467 Control system: KUKA KR C4 Maximum arm reach: 1412 mm Number of axles: 6 pieces Maximum load capacity: 5 kg Machine weight: 127 kg The offer includes: Smart Pad Control Panel FRONIUS TransPuls Synergic 4000 water-cooled welding power unit Steel robot base Steel Fence Complete electrical installation
used
Large basket welding machine, Fabr. Züblin = Machine data of the automatic welding machine: - Range of inner reinforcement diameter 1,465-4,100 mm - Diameter of the longitudinal wires: 6-10 mm - Number of longitudinal wires: 12 or 24 - Length of cylindrical reinforcement: any mm - Weight of the entire system: approx. 26.0 t - Foundation dimensions: approx. 14.0 x 11.5 m Basket in basket production possible, i.e. for large-diameter pipes that have to be manufactured with a double basket from a static point of view Basket production is also possible with this system
table length: 3000 mm table width: 1500 mm table height: 300 mm bore: 28 mm weight: 1670 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
With asortment tube holders, no power cord Auction-ID: A1-48959-163
With asortment tube holders, no power cord Auction-ID: A1-48959-162
De Nederman MCP Air Purification Tower (APT) is een continue filteroplossing die is ontworpen om medewerkers te beschermen tegen gevaren in de lucht in productieomgevingen. Als standalone of aanvullende oplossing vangt de APT-stof en dampen in de lucht af, filtert u deze en blaast schone lucht in effectieve luchtstroompatronen om schone lucht te behouden. Omdat de APT geen bovenleiding nodig heeft, biedt hij een handige en economische oplossing voor veel toepassingen met las- en lastige stof, waarbij afzuiging bij de bron met afzuigarmen van lokale afzuigkappen mogelijk niet praktisch of niet voldoende is om aan de regels te voldoen.
With various accessories and qualification package Auction-ID: A1-49790-1273
incl. two welding robots from the manufacturer CLOOS with different welding equipment two QIROX control units one CLOOS QR-CTU-50-09 pipe welding device Load: 5000 N Torque: 1000 Nm Tipping torque: 2400 Nm Dimensional moment of inertia: 150 kg/m² Power: 2.8 kW Load: 10,000 N Four CLOOS welding machines Type: GLC 603 with two tandem burning systems on the left and a single torch on the left and two tandem torches on the right and a single torch on the right In addition, two welding fume extraction systems from the manufacturer STAUFFER, type: DB-50 2 R with a turning system, type: CLOOS QR-CTU-50-09 in portal design Portal length: approx. 14,000 mm Welding torch holder with connection flange, tandem torch ZMW-640 A-31, robot welding torch for tandem welding incl. torch cleaning unit CMR 6 T SR Robot peripherals: workpiece positioning with vertical rotational movement, vertical stroke Loa ...
Device for welding plastic tubes with a diameter of 63 to 160 mm consisting of: 1 weld tube positioning device 1 machine for machining the tubes before welding (to remove the oxidized film on the surface) machining of the 2 sides simultaneously 1 Teflon disc for heating tubes before welding.
Serial number: 0232-2107-0064-1 for all other welding data see nameplate incl. matching tool box Reference: Baumstark - Lot 56 Auction-ID: A7-49882-86
incl. hose package with original REHM transport case Reference: Zafa - Lot 21 Auction-ID: A7-49882-105
Machine number: 111283 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 2.6 A Connection: 1.1 kW Volume flow: 2500 m³/h Reference: Baumstark - Lot 10 Auction-ID: A7-49882-70
With various accessories and qualification package Auction-ID: A1-49818-1273
For all other welding data, see nameplate Reference: Zafa - Lot 18 Auction-ID: A7-49882-103
Serial number: 2624889 for all other welding data see nameplate Reference: Zafa - Lot 13 Auction-ID: A7-49882-101
Machine number: 007500000502 incl. hose package Attention: without the gas cylinder, for all other welding data see nameplate Reference: Alesco - Lot 90 Auction-ID: A7-49882-56
Serial number: 283254 for all other welding data see nameplate Reference: Zafa - Lot 9 Auction-ID: A7-49882-99
Auction-ID: A1-49846-31
Auction-ID: A1-49846-168
3 different types. Including Fronius TTG2200P. Auction-ID: A1-49846-114
maximum number of results exceeded
please refine your search
69 € 
