129,504 used machines on RESALE, but how to find them? Machine Search
wire electrode, welding wire, welding wire -Type: AWS A5.18 ER 70 S-6 -Diameter: 0.8mm -started role -Weight complete: 4.2 kg
Stick electrodes 4.0 x 450 -Type: OK 48.00 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg
Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Stack electrode 5.0 x 450 -Type: OK 48.00 -Weight per package: 6.3 kg
Stick electrodes 2.0 x 250 -Type: Fincord -Price: per package -Number: 2 packages available -Weight per package: 1.7 kg
Stick electrodes, welding electrodes 2.5 x 290 -Type: 4221 -Price: per package -Number: 2 packages -Weight per package: 5.1 kg
table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,5 - 5,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stick electrodes 3.2 x 350 -Type: Phoenix 120K -Weight per package: 6.2 kg
Welding bar -from: vacuum device Roschermatic VM 45/2 -Price: per piece -Number: 4 pieces -Length: 635 mm/15 mm/30 mm -Weight: 2.2 kg/piece
Stick electrodes 5.0 x 450 -Type: FOX DUR 600 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg
Stick electrodes 2.0 x 250 -Type: Hera yellow -Weight per package: 3.1 kg
table diameter: 330 mm table load: 350 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 120 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 52 Kg dimensions of the machine ca.: 640 x 490 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 330 mm table load: 220 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 100 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 48 Kg dimensions of the machine ca.: 640 x 440 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.
Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg
Stick electrodes 3.2 x 350 -Type: OK 63.31 -Weight: package 3.1 kg/79 pieces -Package: not full
Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...
Welding smoke filter, welding smoke extraction -Suction tube: flexible -Diameter: 230 mm -Length up to: 7 m -Price: per piece -Number: 3 pieces -Dimensions: 1250/290/H270 mm -Weight: 22 kg
Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...
number: 57 Positionen : 22 mm condition: neu weight: 66 kg Set 2 57 pieces, 22mm system, consisting of: Clamps: 6 x 220610.1 Clamps 4 x 220630.1 Prism 4 x 220645.1 Bolt: 18 x 220511 Magnetic bolt 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Stop: 2 x 220426.N Angle: 4 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Type Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Plant No. 04E 85048 Connection voltage 1 x 230 V Setting range 40 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 26 Ampere 3.25 rod electrodes, since 120 / 130 amps Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age approx. 10 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 16 qmm, 4 mr. long 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy versio ...
Stick electrodes 3.25 x 350 -Type: Guarantee -Price: per package -Number: 5 packages available -Weight per package: 5.3 kg
Stick electrodes 2.5 x 350 -Type: CONARC 49 C -Price: per package -Number: 3 packages -Weight per package: 2.6 kg
Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white ...
Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual ...
Stick electrodes 4.0 x 350 -Type: Gricon 515 S -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg
Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
Wire electrode, SG2 welding wire, welding wire -Böhler: EMK 6 D -AWS. ER70S-6 -Wire thickness: 0.8 mm -Price: per piece -Quantity: 2 pieces -Weight: 15 kg
Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...
Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...
Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Machine Type Electrode Inverter Welding Rectifier Ep Systems brand Plant No.: 99J33202 Type W 150 E Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 35 % ED at 150 Ampere 60% ED at 120 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 120 x 300 x 270 mm Weight 4 kg Age approx. 10 years Condition workshop tested good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 25 pieces rod electrodes Böhler 2.5 x 350 mm 25 pieces rod electrode ...
Stick electrodes 2.0 x 350 -Type: Special -Weight per package: 3.9 kg
Stack electrode 4.0 x 350 -Type: Cromocord Kb -Weight per package: 4.8 kg
Machine Type Electrode Inverter Welding Rectifier with PFC control STEL brand Type MAX 191 PFC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 115 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 420 x 160 x 280 mm Weight 9 kg Age 6 months Special accessories PFC control Condition workshop tested, new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 pair of welder gloves with cuff 1 piece slag hammer, heavy version 1 piece steel wire brush 2-row 20 pieces rod electrodes Böhler 2.5 x 350 mm 20 pieces rod ...
Stacking electrode 2.5 x 350 -Type: SL 19 G -Weight per package: 2.7 kg
Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage
Stick electrodes 4.0 x 350 -Type: FE 1006 (FE Yellow S) -Weight per package: 4.6 kg
Replacement welding controls for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1
Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information
stick electrodes 3.2 x 350 -Type: Phoenix SH Yellow B -Price: per package -Quantity: 2 packages available -Weight per package: 4.4 kg
Rated power at 50%ED: 20kVA Short-circuit current: 11.6kA Electrode force: 180daN Projection: 455mm Arm distance, stepless: 173-410mm Electrode cone: Mk1 --- Welding control: WS 402 (4 times, 2 program) --- Incl. additional options: - Foot switch - Main switch - 3m connection cable and Cekon plug 32A --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Stacking electrode 2.0 x 250 -Type: FOX KES -Weight per package: 3.3 kg
Stack electrodes, welding electrodes -Stable electrode: 4.0 x 350 -Type: FINOX 4337 AC -Weight: 5.1 kg
Stack electrode 4.0 x 350 -Type: 4370 W -Weight: 4.7 kg
Electrode welding machine Manufacturer Kemppi Type TYLARC653 Power 650 amps at 35% ED, 545 amps at 60% ED 465 amps at 100% ED Power connection 400 Volt Weight approx. 300kg Machine ready for demonstration under power. Shipping on Euro pallet possible.
one used vertical buttwelding machine Strecker, model SS120 for welding 8.0mm to 30.0mm and 120 kVA
Stack electrode 4.0 x 350 -Type: 330.1 SH Purple R -Weight: 4.8 kg
Stick electrodes 3.2 x 350 -Type: Thyssen Ce I 70 -1 package: 650 pieces -Weight: 17.9 kg
Stick electrodes 4.0 x 350 -Type: Phoenix SH Green TB -Weight: 4.7 kg
maximum number of results exceeded
please refine your search
