129,238 used machines on RESALE, but how to find them? Machine Search
Robot Kawasaki RA006L E-Controller new & original packaging Year of construction: 02/2018 Control: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consisting of: • Robot kinematics • Controller (10m cable to robot kinematics) • Teach Pendant (10m cable to controller) Interfaces: • RS232 • 2x Ethernet (separately confi ...
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...
Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Manu ...
Rated output at 50% ED: 25kVA Short circuit current: 14kA Electrode force: 220daN Throat depth: 455mm Arm distance, stufemlos: 168-443 mm Electrodes Cone: Mk1 --- Welding control: WS 402 (4-times, 2 program) --- Incl. additional options: -Foot switch -Main switch -3 m connection cable and Cekon-plug 32A --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...
Machine Type: TIG Inverter Welding Machine gas-cooled DC system Make Jäckle Type TIG 201 i DC Connection voltage 1 x 230 Volt Adjustment range 3 – 200 amps Duty cycle 35% ED at 200 amps 60% ED at 180 amps 100% ED at 150 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 600 x 255 x 440 mm Weight 24 kg Age approx. 10 years Condition workshop-tested, very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch WHL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 piece of instruction manual Warranty ...
Rated output at 50% ED: 60kVA Short circuit current: 24kA Electrode force: 470daN / easy lift Throat depth: 435mm Arm distance, infinitely variable: 180-510 mm Electrodes Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: -Two hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...
Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Months ...
Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...
Machine Type: TIG Welding Machine Water-cooled DC and AC system Make Dalex Type TGKW 55 Connection voltage 2 x 400 volts Adjustment range 3 – 225 amps Duty cycle 60% ED at 225 amps 100% ED at 175 amps Current setting 5 switching levels max. weldable material thickness 6 mm Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 32 Amps Dimensions L x W x H 1,300 x 600 x 850 mm, incl. bottle cage Weight approx. 200 kg Age approx. 30 years Condition workshop-tested incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20, 4 mtr. 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped Warranty: 6 months from the date of delivery Original price €3,400.00 + VAT ...
Technical data: -Lifting capacity 2000 kg -max load capacity horiz. 3500 kp -Faceplate hub 1750 x 1750 mm -Drehkreuzverängerungen -Faceplate geared motor Tiltable 0-90 ° -Rotation Electr. adjustable 0.2-1.5 m / min -Right - left rotation - welding current transmission 1200 A -400 V - table height in horiz drive. Position with frame approx. 2070 mm -Table height at horiz. Position without stand approx. 940 mm -Space requirement approx. B 1650 x H 1130 / 940 x H 2500 mm -Weight approx. 2.2 t
Spare welding controllers for resistance welding machines also available: MPS 1033 MPS 1036 MPS 15033 MPS 15036 MPS 15043
Spare welding controllers for resistance welding machines MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1
Spare welding controllers for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1
Machine Type: TIG Inverter Welding Machine Gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 6 years Condition workshop-tested new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Original price ...
KEMPPI FastMig M 420 MIG/MMA welder was built in 2016 in Finland by Kemppi Oy. The machine, which is a configuration of high-quality components, is designed for both complex manual and mechanised MIG/MMA welding. With unlimited flexibility for specialised tasks and materials, the FastMig M420 welder is the best choice for businesses looking to increase productivity and welding quality. The KEMPPI semi-automatic welding machine consists of the following parts: – power source: KEMPPI FASTMIG M 420 – wire feeder: KEMPPI MXF 65 – feeding roller: DT400 – cooler: KEMPPI FAST COOL 10 – 4-wheel trolley: KEMPPI PM500 – connecting cable 10 m There are 2 units of these machines for sale. Price included in the advertisement is for 1 unit. Technical specifications of the KEMPPI FastMig M 420 welding machine - supply voltage: 400 V (-15% to +20%) - rated power (60%/100%): ...
Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Ess Type SquareARC 306 AC/DC Connection voltage 3 x 400 volts Adjustment range 5 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 230 amps Current adjustment infinitely variable max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 16 ampere slow blow Dimensions L x W x H 950 x 435 x 980 mm Weight 120 kg Age approx. 10 years estimated without obligation Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20/Z, DD 12 mtr. long 1 piece ground cable 50 sqmm, 8 mtr. long 1 piece pressure reducer 1 piece spare parts box complete E ...
Technical data: -Welding current 505 A 35% ED 433 A 60% ED 385 A 100% ED -Welding current 6 coarse steps + 6 fine levels adjustable - welding current adjustable from 40 A / 16 V to 505 A / 39.3 V - digital amp + voltmeter -separate stroke of wire feed case - 4 roll wire feed Steplessly adjustable - 2 + 4 stroke â regulation -E - welding equipment - hose water cooled approximately 6 YDS -Ground cable -Pressure reducer -Intermediate package machine - wire feed speed approx. 8 m - connection 400 V / 50 Hz 50 A -Space requirement approx. B 520 x H 1400 X 1000 mm -Weight approx. 170 kg
Technical data: -5 x good plate surface, 2 x good plate with hole -Mounting plate - length approx. 1485 mm -Width approx. 990 mm -Plate thickness 50 mm -Plate thickness with ribbing 115 mm -Height adjustable in height approx. 880 mm - plate frame -4 T - longitudinal grooves L 1485 mm -Distance between the grooves 250 mm -Sliding distance from outer edge 120 mm -Keyway width approx. 17 / 38 mm -Groove depth approx. 40 mm -Weight approx. 950 kg -Space requirement approx. L T 1485 x 990 x H 880 mm
Technical data: -Capacity approx. 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, type 6 PTF, BJ. 97 - space requirement approx. B H 1100 x 1300 X 1600 mm -Weight approx. 300 kg
One used complete mesh welding line from SCHLATTER. This MG305 works from line wire off spools and pre straightend cross wires. This machine is very complete, from line wire pay offs to the automatic turning and stacking unit for meshes up to 8.000mm This MG305 can weld up to 10mm and do have 100 and 150mm equipment. For the production of the cross wires is a good VITARI straightening and cutting machine availible For this line a big spare part package is availible as well and a lot equipment as: Spools ( 3 ton ) Butt welder Mesh Package Lifter Automatic Mesh Package Tyning System Compressor Main Transformer etc..
Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg
ZASO MSA-4PS beam welding line was built in 2009 in Poland by ZASO Polski Sprzęt Spawalniczy. The machine enables precise longitudinal welding of, among others, plate girders, T-beams, I-beams and H-beams, using the MIG/MAG or SAW method. The applied technical solutions fully automate the process, with the guarantee of obtaining the highest quality welds. The machining process is performed by two torches with integrated correction slides, which allow them to be moved remotely in two axes. A special frame clamp system holds the welded parts throughout the process, without the need for preassembly or the use of special tooling. The overriding control system also synchronises the work travel with the welding power sources. The ZASO automatic welding machine is also distinguished by its modular work table, consisting of up to five modules, each 6 m long. It has an integrated cooling s ...
Ref.Nr. 00885 Name of the system Mesh welding machine CE Manufacturer: IDEAL Werk - Lippstadt IDEAL 05 small Model GAE 112 Year of manufacture 2004 Revised in 2021. Diode package and transformers replaced, cables cleaned worth €32,000 Activity / Description – spot welding semi-automatic Rated power at 50% ED 2x200kVA Connected load 400kVA Primary voltage 400V Open circuit voltage 7V Nominal frequency 50-60 Hz Fuse 800 A Made in Germany Specifications: Nominal primary voltage 400 / 50 V / Hz Control voltage 24 V/DC Number of transformers 2 pieces Nominal power per transformer at 50% ED 200 kVA Connected load at 50% ED 400 kVA Fuse L1+L2 800 Amp Fuse L3 63 Amp Supply cable cross-section L1 + L2 + L3 (Lmax 90m) 2 x 240 mm2 Supply cable cross-section L3 125mm2 Supply line to the machine PE 240mm2 Supply cable PC 230V 10A 32.5mm2 Electrode ...
Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg
Ref.nr. 00886 Name of the system: Portal mesh welding machine Manufacturer Fibro GSA Made in Germany Model GAE 516 Year of construction 2008 Nameplate: Connected load 630 kVA Primary voltage 400V Nominal frequency 50-60 Hz Fuse 800A Specifications: Nominal primary voltage 400V/ 50 Hz Control voltage 24 V/DC Number of transformers 10 pieces Nominal power per transformer at 50% ED 63 kVA Connected load at 50% ED 630 kVA Fuse L1+L2+L3 (Lmax 90m) 800 A Supply cable cross-section L1 + L2 + L3 (Lmax 90m) 2x240 mm2 Supply line to the machine PE 1x240mm2 Supply cable PC 230V 10A 3x2.5mm2 Electrode force 480 N/bar Air pressure – connection G 3/4 Air pressure min. 6 bar Air consumption at 80 cycles / min 600 Nl/min Cooling water connection inlet G 2.0 Cooling water connection outlet G 2.0 Cooling water consumption 92 l/min Cooling water pressure min. 3 ba ...
Technical data: -max load capacity 300 kg -maximum clamping diameter approx. 1500 mm -Chuck diameter 300 mm -Bore hollow shaft approx. 60 mm -Rotation Electr. infinitely variable - right - + links - course -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 800 x 1150 x D 700 mm -Weight approx. 500 kg
AXXAIR orbital welding system was built in 2020 in France. It is an extremely easy-to-use and efficient solution for precision welding of tubes with a maximum diameter of 170 mm. The mechanised orbital welding is performed using the TIG method, in which a torch with a non-fusible tungsten electrode moves around a stationary workpiece. In this way, welds of the highest quality, repeatability and cleanliness are produced. The orbital welding system is offered with all the necessary components including – orbital welding power source AXXAIR SAXX-210 – open head for orbital welding SATO-170E41 – orbital cutting machine AXXAIR CC172 Technical specifications of the individual components of the AXXAIR orbital welder Power source - single-phase network with earthing - supply voltage 110-230 V ± 15% - frequency: 50/60 Hz - input current consumption (at 230 V): 25 A - input c ...
Rated output at 50% ED: 4kVA Clamping force: 200daN Compressive strength: 80daN --- Incl. additional options: -Post annealing equipment -Trolley -Grinding machine for deburring --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...
Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg
Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...
AXXAIR orbital welding system was built in 2020 in France. The system, designed to weld tubes with a maximum diameter of 220 mm, proves itself wherever the highest quality, repeatability and cleanliness of joints are required. The mechanised orbital welding is performed using the TIG method, in which a torch with a non-fusible tungsten electrode moves around a stationary workpiece. The use of this solution guarantees welds of the highest quality, repeatability and cleanliness. The orbital welding system on offer is fully complete and consists of the following parts: – orbital welding power source AXXAIR SAXX-210 – open head for orbital welding SATO-220E41 – orbital cutting machine AXXAIR CC222 Technical specifications of the individual components of the AXXAIR orbital welder Power source - single-phase network with earthing - supply voltage 110-230 V ± 15% - input cur ...
Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg
used
Qty. 1 Second-hand wire cage welding machine – very good condition Mfc.: Züblin Type: ASMS 30 200 Built: 1985 Machine for production of wire cages within the range of diameters between 300-2250 mm. Wire cage dia.: 300 – 2250 mm Dia. of longitudinal wire: 5 – 7 mm Number of longitudinal wires: 12 Diameter of ring wire: 5 – 9 mm Grade of ring wires: 35 – 165 mm Longitudinal wire – speed:0.3-3.0 m/min.
PANASONIC TL-1800 GIII welding robot was built in 2021 in Japan by Panasonic Smart Factory Solutions Co., Ltd. The machine, distinguished by its high reliability and ease of operation, is an excellent choice for precision welding of workpieces using the TIG method. Its slim design, combined with the large range of arm movement, allows free operation in all positions, even in hard-to-reach places. The TL 1800 robot arm is offered together with equipment, which includes a controller, a portable control unit and a TIG welder. The total weight of the machine is 215 kg. Technical specifications of the PANASONIC TL-1800 GIII robot - number of axes: 6 - maximum payload: 8 kg - maximum arm reach: 1801.8 mm - robot axis movement range axis 1 (rotating trunk): ± 170° axis 2 (upper arm): -90° / +165° axis 3 (forearm): -80° / +210° axis 4 (rotating wrist): ± 270° axis 5 (bending ...
Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5
Tape welding machine for sawmills up to 35mm Manufacturer Ideal Type B1 220 Volt 6 Ampere Special price
Machine type TIG inverter welding system gas-cooled DC system Make Merkle Type MobiTIG 190 DC Connection voltage 1 x 230 volts Adjustment range 5 - 190 ampere Switch-on time 20% ED at 180 amperes 100% ED at 90 amperes Current adjustment infinitely variable max. weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare part box kpl. Equipped 18 month warranty 1 piece user manual New price €1,590.00 + VAT Price kpl. wi ...
Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
ALPHA Q 351 PROGRESS PULS MM WLG FD • Year 2016 • Inverter welding machine, DC, pulse, water-cooled • Multiprocess: MIG/MAG, TIG lift arc, MMA, air arc gouging • Water-cooled MIG/MAG inverter welding machine, pulse, with separate wire feeder Excellent Multimatrix welding characteristics • Equipped with Synergic characteristics for EWM coldArc, EWM coldArc puls, EWM pipeSolution, EWM forceArc, EWM forceArc puls, EWM rootArc, EWM rootArc puls and superPuls • Adjustable start and end-crater functions • Program operation with 16 programs per JOB • Equipped with Synergic characteristics for GMAW welding of steel/CrNi/aluminium • Infinitely adjustable arc dynamics (choke effect) • Large power reserves thanks to high duty cycle with all components heating up less as a result, guaranteeing a longer service life for machines when in use • ...
• Year 2022 (like new) • Offering up to 800 amps of gouging power with 50 % dutycycle, • the KempGouge ARC 800 is a heavy duty power source package that is designed for all types of carbon arc gouging. • KempGouge can be used with the majority of metals, such as steel, stainless steel, cast iron, nickel, copper, magnesium, andaluminum. • KempGouge lets you open roots or faulty welds and cracks, prepare welding grooves, cut metals, make holes and cleancasts, and remove excess metal. • The characteristics curve controlling the KempGouge’s operating parameters has been designed specifically for carbon arc gouging, so its gouging properties are optimal. • The noise levels of KempGouge have also been kept very low. • FAST AND EFFECTIVE Way to remove defects, backgouge the root, cut metal and pierce holes • EASY WAY To move the equipment and adjust t ...
Item number 67379-0101 Transformer cross seam welding for Tetra Pak TBA 8 aseptic filling machine
MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee
Manufacturer: Kemppi (Finland) Power: 5 - 300 Amp semi-automatic electrode welding machine Welding pliers new! (length approx. 4.70 m) Ground cable new! (length approx. 3.70 m) Connection cable 5 pole new! (length approx. 2.90 m) Note: There are 3 equivalent devices in stock! The price refers to the unit price! (Changes and errors in the technical data and prices reserved!)
The cross-welding stamp of the packaging machine is closed by a servo motor and is infinitely variable. The width of the infeed belt is infinitely adjustable via a hand crank, which allows perfect, simple and uncomplicated adjustment of the product width. The parameters are entered via a modern, easy-to-use touch screen. The flow length is controlled photoelectrically, so that different package lengths can be packed one after the other and one after the other. The machine is technically designed for very tight, perfect shrink-wrapping of the products, so that optimal packaging results are achieved in any case. The machine works with an automatic film feeder, it is possible to work with different transport speeds. Longitudinal and transverse welding are permanently heated and easy to control via the touch screen. Product Dimensions: Length: min. 50 mm, max. endless Width: min. ...
maximum number of results exceeded
please refine your search
