128,595 used machines on RESALE, but how to find them? Machine Search
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...
Machine Type: Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Connection voltage 230/400 V Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Portable assembly system design Fuse 26 Ampere Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age 10 years Condition workshop-tested new incl. UVV test report Scope of supply welding system with the following accessories: 1 piece ground cable 16 sqmm, 4 mr. long 1 piece electrode cable 16 sqmm, 4 mtr. long 1 piece of hand shield 1 piece facing glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 1 piece mains plug 230 V, soli ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
8008 CM Art. item / Anno/Year: 06-01/90, Hz 50, 380 V, 100 KVA 50%, 250 KVA, 8200 Amp 100%, 36000 Amp short circuit, 710 da N pressure, 300 l/h H2O Water Cooling - Made in Italy The spot welding machine was used weekly about 10 years ago and was fully operational at that time. The machine can be connected at any time and can be checked by qualified personnel by the potential buyer with the product to be manufactured in the future. The machine can be picked up at the current location – as it stands – without warranty and other services for 2800.00€ VHB or shipped plus shipping costs. Alternatively, we can have the machine checked by external specialists, in which case the price is approx. 4500,00€.
Manufacturer: Thermacut Model: EX-TRACK CNC-PA OX Year of Manufacture: 2021 Type of Machine: Plasma cutter Max Travel Speed: 3000 mm/min Max Cutting Length: 3050 mm Max Cutting Width: 1525 mm Voltage: 110V/230V Current: 1A Find more here - / Contact us at -
table length: 1200 mm table width: 700 mm table height: 900 mm table load capacity: 250 Kg weight of the machine ca.: 36 Kg dimensions: 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Key data: 80 kVA, 350 mm, 600 kp
Rated power at 50%ED: 80kVA Short-circuit current: 45.4kA Electrode force: 100-600daN / single stroke Projection: 350mm --- Welding control: MPS 100mono (8 times, 1 program) --- Incl. additional options: - Pre-mounted electrode holder -Foot switch - Adjustment device - Electronic flow monitor - Main switch + transformer tap changer 4-way --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
One used high performance mesh welding line for standard mesh This lines is feeding cross and line wire off spools directly Max working speed are 180 cross wire/min Complete line from line wire pay offs up to turning ans stacking unit. Further equipment ( spools, butt welder , main transformer etc.. and cold rolling lines ) can be offered as well
Steel fabricated welding bench with vice, 1500mm x 1000mm Auction-ID: A1-45187-230
One used mesh welding line for standard and special mesh. Line wire feed from spools, coils or reels; straightening units, line wire pull-off and compensating mechanism; welding machine with roller advance feed; Cross Wire Disc Feed; Line Wire Shear; mesh turning and stacking unit This line is equipped as well with line wire pay off for spools. Extras: Spools ( 3 tons ), main trafo, compressor, butt welding machines and cold rolling line
250A Tig DC, Welding torch not included Auction-ID: A1-45383-8
One used mesh welding line for standard mesh working line- and cross wires off spools, mainly exesting of: Line wire feed from spools, straightening units, line wire pull-off and compensating mechanism ( loop ), Roller Advance Feed, cross wire feed with disc insertion from spools, welding machine, Line Wire Shear mesh turning and stacking unit tying system for the mesh packages Extras: Spools Spare part package Butt welder
ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz
table diameter: 180 mm : 10 Kg : 5 Kg chucking diameter: 65 mm turning speeds: 2 - 20 stufenlos swivelling range: 90 Grad tilt adjustment: manually/mechanicall: manuell connected load frequency: 230 V weight of the machine ca.: 18 Kg dimensions of the machine ca.: 300 x 300 x 300 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T
weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
Offer 19013 Specifications: - Rated power at 50% ED 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Weld values sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm spacing 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water volume approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Hanging bracket with gimbal
Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg
length:1200 mm height:800 mm weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
Offer 17230 Specifications: - Load capacity 3600 kg - Face plate diameter approx. 1050 x 1050 mm - Face Plate mot. swivel + swivel - Face plate speed electr. infinitely variable 0.2 - 1 rpm -Mot. Right - + Left - Run - Handheld remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg - Handheld remote control
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672
Offer 24037 Specifications: - Max. load capacity 150 kg - Face plate diameter 800 - min. table height in horizontal position approx. 600 mm - Max. table height in horizontal position approx. 1100 mm - Face plate hydraulically infinitely variable swivel or tilt - Right + counterclockwise rotation of the face plate - Rotary movement electr. hydt. adjustable - Welding current transmission approx. 500 A - Drive 400 V - Connected load approx. 0.75 kW - Space requirement approx. W 1700 x H 1450 x D 1000 mm - Weight approx. 900 kg
Offer 24228 Specifications: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E. - Welding cable - Ground cable -Trunk - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg
Equipped with torch and gas pressure regulator
Equipped with IGBT inverter with high duty cycle; mains voltage 400 V / 50 Hz, 3 phase; Output current 40-350 A; duty cycle 80%; welding wire diameter: 0.8-1.2mm; recommended sheet thickness: 0.5-12mm; wire feeding: 4-roll; synergy mode; double pulse function; VRD; 2T/4T function; memory; 5 languages; New in box
Torch and ground cable are missing
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672
Equipped with welding processes: MIG, MAG, TIG, MMA; mains voltage 230 V, 50Hz; Rated welding power: 200A/50Hz; input power 8.2 kVA; protection class IP21S; Unused in box
Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support
Available quantity: 2 systems Year of Make: 2019 Weight: 6021 kg Rated current: 20 A Connected load: 12 kVA Disk laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and determination: PRIMES FocusParamaterMontitor (FPM) Laser source: Trumpf TruDisk 5001 Welding fume extraction: HERDING Comp 1500-8/9 SB Year of extraction: 2018 Extraction volume: 2000 Bm³/h Included: HERDING Multicoater_MCI 55/1 dosing device for adding additives to the filtration process Enclosure cooling: RITTAL SK 3185830 The system was used to produce batteries.
Inv. Num. : 8259 Type: S5-A701S Producer: EPSON Created: 2010 Parameters: Control system: EPSON RC 180 Maximum arm reach: 786 mm Axle number: 6 Machine weight: 36 kg
Machine type: MIG/MAG welding machine Make MERKLE Type ME 282 LK N Connection voltage 3 x 400 volts Adjustment range 40 – 280 amps Duty cycle 15% ED at 280 amps 60% ED at 200 amps Current setting 7 switching levels Point and interval setup Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 885 x 375 x 590 mm Weight 80 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable permanently mounted 1 piece pressure reducer 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts box complete Equipped 1 can of ME 4000 non-stick spray 1 Piece ...
1x mederman extraction with extraction arm, 1x disassembled arm of approximately 6 meters.
Robot welding cell incl. positioner Hydraulic 3D welding table ABB max. workpiece weight 2 tons and max. diameter 1400 mm Robot IRB 4600 M2004 Welding torch system Wire Select 2.0-Vers.LSQ5/Q80 with 2-fold wire feed Thielmann gas nozzle cleaning device Protective housing with door for robot welding cell
Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...
maximum number of results exceeded
please refine your search
300 € 
