weld used for sale

table diameter: 1300 mm table load: 3 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 6000 Nm 0: 1,1 / 1,1 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 3 t swivelling range: 0 - 135 Grad turning speeds: 0,07- 0,7 U/min table height adjustment: von 980 bis 1750 mm max. torque on the faceplate: 4500 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mm table load: 2000 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1100 - 1550 mm max. torque on the faceplate: 4000 Nm engine output: 1,1 / 0,75 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 300 mm table load: 50 Kg swivelling range: 90 Grad turning speeds: 1 - 12 stufenlos U/min table load capacity: 50 kg vertikal total power requirement: 220 kW weight of the machine ca.: 0,036 t dimensions of the machine ca.: 0,45 x 0,43 x 0,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm table load: 300 Kg swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 300 kg vertikal total power requirement: 220 kW weight of the machine ca.: 0,078 t dimensions of the machine ca.: 0,66 x 0,45 x 0,48 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 4 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 8000 Nm 0: 1,1 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min height adjustment: 1450 - 2200 mm max. torque on the faceplate: 20000 Nm engine output: 1,5 / 2,0 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 20000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 3,0 + 4,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 400 mm table width: 400 mm table load: 0,2 t table diameter: 400 mm swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 100 kg. vertikal total power requirement: 220 kW weight of the machine ca.: 0,065 t dimensions of the machine ca.: 0,56 x 0,42 x 0,46 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mm height: 67,5 mm daylight: 65 mm external diameter: Futter 200 mm external diameter: Spannhebel 360 mm weight: 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 3000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1200 - 1800 mm max. torque on the faceplate: 6000 Nm engine output: 1,1 / 1,1 kW welding current: 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1210 bis 2238 mm max. torque on the faceplate: 1200 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,261 t dimensions: 1,2 x 1,2 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,73 t dimensions: 2,0 x 1,0 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 900 mm table load: 2000 Kg weight of the machine ca.: 0,24 t dimensions: 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 6 t swivelling range: n x 360 Grad further details please find in the pdf document attached! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bag welder,HAWO model HM 850 DC,welding speed 10 mtr/min.

length: 0 mm height: 0 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Ultrasonic Welding Machine for Plastic Articles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TIG welding rod, welding wire -Net weight: 3.0 kg -Number: 1x package available -Price: per package -Weight complete: 3.2 kg/package

current capacity: 16 kVA throat: . mm contact pressure capacity: . kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4500 mm floor-plate width: 1600 mm floor-plate height: 370 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4500 mm floor-plate width: 1600 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4600 mm floor-plate width: 1620 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand welding pipes production line Inlet sheet dimensions: max. 8 x 12 m x 600 mm Outlet pipe dimensions: Dia.: 610 - 2500 mm (could be enlarged) Wall thickness: 40 - 600 mm Length: 12.0 m

Cell with welding robot (MIG) Motoman YR-MA01400-A00 Cell with welding robot (MIG) Yaskawa - Year of construction: 2010 - 6-schsen robot Motoman YR-MA01400-A00, - Source: Motoweld EL350 III - Positioner Yaskawa 2 pcs.. - Dimensions of the cell: 3300 mm x 3000 mm x 2400 mm - Control Motoman DX 100 - Weight: 2.5 t

Cell with welding laser E-TECH TRUMPF TLF4000 Year of construction: 2005 Laser: TLF 4000 Rok produkcji: 2005 Laser: TLF 4000 Receiving robot : Yaskawa Motoman NX100

Manufacturer: Scansonic Type: AL01 Condition: refurbished, since then unused and professionally stored in the manufacturer's suitcase Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm to 4 kW Illustrations: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber plug: Trumpf B or Type D (LLK Auto) Laser: CW laser up to 4 kW Working range height (Z): ± 5 mm Robot adaptation: any Repaired/replaced: - Lens - Compression spring - Protective spring - Cover - Beam aperture - Shaft spring - Fiber coupling firing In addition, the device was cleaned, adjusted and force-normalized.

wire electrode, welding wire, welding wire -Type: AWS A5.18 ER 70 S-6 -Diameter: 0.8mm -started role -Weight complete: 4.2 kg

Welding bar -from: Roschermatic VM-19/S/CE vacuum device -Length: 495/90/H 160 mm -Weight: 1.5 kg

Welding bar -from vacuum device: Roschermatic VM 45/2 -Price: per piece -Number: 2 pieces -Length: 680 mm/15 mm/30 mm -Weight: 2.4 kg/piece

Welding bar -from: vacuum device Roschermatic VM 45/2 -Price: per piece -Number: 4 pieces -Length: 635 mm/15 mm/30 mm -Weight: 2.2 kg/piece

Earth cable for inert gas device, electrode device -Length: 8 m -Dinse connector -With: gas hose -Weight: 24 kg

Earth cable for inert gas device, electrode device -Length: 5 m -Dinse connector -With: gas hose -Weight: 11 kg

Used but fully functional. Cooling unit for water cooling also available. Manufacturer: Dalex Type: SL 16-2G Year of construction: not apparent Length of electrode arms: 600mm Foot switch Equipment: • Electrode arms L = 600mm • Substructure / elevation 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

Earth cable for inert gas device, electrode device -Length: 2 m -Dinse connector -With: gas hose -Weight: 5 kg

Earth cable for inert gas device, electrode device -Length: 30 m -Dinse connector -With: gas hose -Weight: 68 kg

EMA high-frequency welder with chiller EMA High Frequency Welding Machine MFA with Thermotec PT2000 water cooling system Range of welding machine 0 - 1000 ° C MF Output: 80A Frequency MF-Gen.: 10 KHz Mains connection: 380V 106 A Foot pedal Water cooling, chiller Thermotec PT2000 Dimensions approx. L1500x W730x H1900mm Volume 1730 Ltr. YEAR: 2004 The drip tray is not included in the scope of delivery.

Earth cable for inert gas device, electrode device -Length: 13 m -Dinse connector -With: gas hose -Weight: 28 kg

Earth cable for inert gas device, electrode device -Length: 33 m -Dinse connector -With: gas hose -Weight: 72 kg

Earth cable for inert gas device, electrode device -Length: 27 m -Dinse connector -With: gas hose -Weight: 64 kg

Machine Type: TIG Inverter Welding Machine gas-cooled DC system Make Jäckle Type TIG 201 i DC Connection voltage 1 x 230 Volt Adjustment range 3 – 200 amps Duty cycle 35% ED at 200 amps 60% ED at 180 amps 100% ED at 150 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 600 x 255 x 440 mm Weight 24 kg Age approx. 10 years Condition workshop-tested, very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch WHL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 piece of instruction manual Warranty ...

ARO Reversible Ergoline Type X Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you. Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: RESISTANCE welding gunARO/IQR YOC 2014, manual; incl. IQR Harvys turning control unit Additional production formats

ARO Reversible Ergoline kVA 55 Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you. Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: Resistance welding gun ARO/IQR, PSZ25, YOC 2014, manual; incl. IQR Harvys turning control unit

ARO Turn Ergoline Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you. Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: Resistance welding gunARO/IQR manual; incl. IQR Harvys turning control unit

- Compressed air: 6 bar - Transport speed: 3 - 30 m/min - Welded frame dimensions (LxW): 580 x 440 mm - Film core diameter: 76 mm - Max. film roll diameter: 300 mm - Max. product height: 180 mm - Film thickness: 7 to 60 mμ - Max. foil width: 550 mm - Cycle rate: 40 cycles/min - Total power: 3.7 kW - Machine weight: 560 kg - Space requirements (W x D x H): 2.05 x 1.72 x 1.48 m - Condition: good Details Angle welding machine fully automatic, permanently heated welding knife, DELTA color touch screen, horizontal and vertical photocells, film material polyolefin fine shrink films, PVC, PLA and other bio-films, with labeler / barcode printer SATO M8485Se Accessories no other accessories, documentation

ARO Reversible Ergoline Type X Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you.Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: Resistance welding gun ARO/IQR, YOC 2014, manual; incl. IQR Harvys turning control unit