weld used for sale

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,26 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min max. torque on the faceplate: 900 Nm welding current: 500 Ampere total power requirement: 0,75 + 0,75 kW weight of the machine ca.: 0,8 t Welding rotary tilting table - Remote control - 2 x welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mm table width: 800 mm table height: 920 - 1000 mm : 1000 kg height of stroke: 510 - 1550 mm total connected load: 1,5 kW connected load frequency: 230 V weight of the machine ca.: 0,55 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 550 mm table load: 500 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlos table load capacity: 250 kg. vertikal total power requirement: 0,8 kW weight of the machine ca.: 245 Kg dimensions of the machine ca.: 820 x 730 x 710 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2990 mm table width: 1490 mm table height: 850 - 900 mm weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,1 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 77 Positionen weight: 146 kg condition: neu : 28 mm Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic bolts 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,8 U/min max. torque on the faceplate: 450 Nm table pass: 80 mm welding current: 500 Ampere total power requirement: 0,18 + 0,18 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mm table load: 0,5 t swivelling range: 0 - 135 Grad turning speeds: 0,2 - 3 U/min height adjustment: 400 - 900 mm boring diameter: 100 mm welding current: max. 500 Ampere total power requirement: 0,75 kW including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,261 t dimensions: 1,2 x 1,2 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic angle welder Manufacturer: Diez Type: AWS4535 Year of manufacture: 2018 No operating hours ! Welded frame: 500 x 350 mm Band width: 32 mm External dimensions: 170 x 130 x 135 cm

number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item  ...

Offer 24587 Specifications: - Electrostatic filter with indicator light - Extracted and purified air is returned to the working area - Wall-mounted design with two articulated extraction arm - Articulated suction arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter area 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Offer 05394 Specifications: - BIA tested sweat extraction device - Joint extraction arm 3000 mm - Air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - Filter area approx. m² - Filter control - light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

HF welding machine with sliding table - 1.1 KW

HF Welding Machine with Sliding Table

Rated power: 63 kVA Projection: 520 mm Electrode arm spacing: 200 mm Welding capacity steel: approx. 7 + 7 mm Welding performance of non-ferrous metals: approx. 2 + 2 mm electr. Connection: 380 V kW

Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Stock number: F986, In stock: Yes, Amount in stock: 1 pc., Item: Bag welder, Construction: For impulse welding of thermo plastic foils, Welding length: Max 300 mm, Outer dimensions: L 390 x W 360 x H 160 mm, Other: With foot pedal

Stock number: F846, In stock: Yes, Amount in stock: 1 pc., Item: L-bar welder, Standing: 4 pcs. legs with wheels, Construction: For packing of units in film, Outer dimensions: L 1839 x W 800 x H 1320 mm, Welder: L 400 x W 400 mm, Gab: W 380 x H 225 mm

Stock number: F483, In stock: Yes, Amount in stock: 1 pc., Item: Tray welder, Standing: Table model, Welding format: Max L 220 x W 175 mm, Type: For top/lid welding of foil trays, Other: Manuel with thermostatically control

Welder Manufacturer: Merkle Type: HighPulse 552 RS Year of Make: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off fuse

PROGRESS MESH WELDING M-System Evolution Model 2012 M25576 • MMR – Straightening Machine Model 2012 • SWR – 6 Welding Heads Model 2012 Max mesh size: 3.5 m width and 9.0 m length Cross & length wires diameter: 6, 8, 10, 12, 16mm Mesh characteristics: Width: up to 3,500mm, Length: up to 9,000mm Min. Width: 500mm, Min. Length: 1,000mm Max. Bar Length: 9,000mm, Min. Bar Length: 500mm Bar Length Tolerance: +-5mm, Bar Placing Accuracy: +- 10mm Crosswire Diameter: 6, 8, 10, 12 and 16mm Line Wire Diameter: 6, 8, 10, 12 and 16mm Bar on Bar Welding: 12mm on 12mm Placement Angle of Bars: 0° or 90° Minimum Flying End Length: 25mm A Bar must have at least two welding nodes Only one Bar per receiver is permissible Standard centres: Cross Wires: Infinetely variable (minimum 35mm) Line Wires: Multiple of 25mm Minimum Centres: Cross Wires: 25mm Line Wires: 25mm ...

Manufacturer: Eckert Model: Jantar Year of Manufacture:2010 Table size: 3x6 meters 2 Hypertherm XPR 120A high-definition plasma cutting heads Pipe cutting attachment Exhaustor system One plasma source has had parts removed and requires replacement components. The machine is fully operational with one cutting head. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm

table length: 2400 mm table width: 1200 mm table height: mm : 4000 kg height of stroke: 510 - 1550 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Straightening and welded plate cast steel-grey cast iron strongly ribbedLength 2000 mmWidth 1200 mmThickness 150 mmWorking height 800 mmPanel thickness 35 mm- Substructure made of solid woodWeight approx. 950 kgGood surface; used

Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavy straightening plateLength 3050 mmWidth 2000 mmThickness 300 mmPanel thickness approx. 55 mm throughoutWeight approx. 4.5 ton.Good condition; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1600 mmThickness 110 mmWorking height 600 mmPlate thickness 30 mm throughoutWeight approx. 1000 kgGood condition, good surface; used

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength: 1000 mmWidth: 800 mmThickness: 250 mmWorking height: 820 mmPlate thickness: 30 mm throughout- height-adjustable metal substructureWeight: approx. 400 kgSurface rusted; used

Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50Identical to CEBORA ash. No. 244311 Year of construction approx. 1992Power 50 Amp. = 35 % ED 30 Amp. = 100 % EDEsetting range 2 stagesHose package length approx. 6 metersCompressed air connection 4.7 barMains connection 400 Volt, 50 Hz, 32 Amp. PlugSpace required L x W x H 500 x 350 x 700 mmWeight approx. 80 kgGood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 100 mmWorking height: 745 mmPlate thickness: 40 mm throughout- stable metal substructureWeight: approx. 800 kgGood condition; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmWidth 1000 mmThickness 230 mmWorking height 970 mmPanel thickness 38 mm throughout- Metal baseWeight 450 kg; used

Straightening and welding plate steelMilled steel plate with good surface, heavy straightening plateLength 1900 mmWidth 1500 mmThickness 70 mm continuous machined surface, surface milled- plate provided with some symmetrical holesWeight approx. 1600 kggood conditionHeight-adjustable feet made of cast steel can be found in our shop; used

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedheavyheavy: straightening plateLength 1600 mmwidth: 1005 mmThickness: 280 mmPlate thickness approx. 85 mm, continuous- Center hole 245 mm, 400/800 mm - Tapped holes M 20, approx. 55 mm deep- Through-holes 27 mmWeight: approx. 2.5 to.Good conditionFormer press table - presumably worked on both sides; used

Welding Fume Extraction, Soldering Suction, Laboratory SuctionHigh Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 DSerien. No. 2902619 year of construction 2004Device air volume flow max. 250 m3/hMinimum air volume flow min. 100 m3/hSeparation efficiency 99.97 %Welding fumes class W3Motor power approx. 0.75 kWNet connection 230 volts, 50 Hz- extraction power infinitely adjustable- 2 pieces extraction connections 45 mm- mechanical air filter (used)- mobile base with 4 fixed castors,

Straightening and welding plate SIEGFRIED WEYRAUCH GemmingenCast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmwidth 800 mmthickness 28/125 mmworking height approx. 850 mm- feet with adjustment screws for aligning the plateWeight 370 kggood surface; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 240 mmWorking height: 850 mmPanel thickness approx. 30 mm throughout- 5 pieces height-adjustable feetWeight: approx. 1000 kgGood surface; used