weld controller used for sale

Device for welding plastic tubes with a diameter of 63 to 160 mm consisting of: 1 weld tube positioning device 1 machine for machining the tubes before welding (to remove the oxidized film on the surface) machining of the 2 sides simultaneously 1 Teflon disc for heating tubes before welding.

table diameter: 800 mm table load: 1100 Kg swivelling range: 360 Grad turning speeds: U/min connected load frequency: 400 V weight: 3,5 t Dimensions (LxWxH): 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: CLOOS Model No.: Welding robot Year: 2017 Condition: Used Stock number: 9507

Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 100013501700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, ...

DALEX PMS 10-4 & COHLINE Water Chiller DALEX, type PMS 10-4 powerful and robust industrial spot welding machine in a ready-to-use set with a matching COHLINE water cooling unit. Highlights & Condition: Extremely low mileage: The built-in DALEX MPS 100 digital control system shows an original odometer reading of only 13,282 cycles! For an industrial machine of this caliber, this is as good as new and guarantees minimal wear and tear. High electrode force: This model offers a powerful contact pressure of up to 690 daN for perfect spot welds even on thicker sheets. Including cooling: Thanks to the powerful COHLINE cooling unit (5.8 kW), the machine is immediately ready for permanent industrial shift operation without overheating. Flexibility & Safety: Equipped with a key switch for easy choice between control by footswitch or the two-hand safety console. Technical  ...

current capacity: 25 kVA number of controlled axis: 6 workpiece weight: 10 kg weight of the machine ca.: 1550 kg Year of construction 2020 demonstration machine, as new Easy ARC 01.02 FD-B6 Welbee P500L welding robot station MIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6 with welding table 2000x1200mm Hole diameter 28 mm The mobile welding cell for the craft business Setting range MIG / MAG 20 - 500 A Steplessly adjustable switching levels Duty cycle at max.current 40 ° C 50% Current at 100% ED 40 ° C 410 A Wire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1050 mm height: 1450 mm weight of the machine ca.: 175 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mm height: 650 mm total power requirement: 3,7 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 800 x 330 x 650 mm Technical Specifications Continuously adjustable range [A] 35â270 Duty cycle (DC) at Imax. (10 min) [%] 30 (40) Welding current at 100% duty cycle [A] 160 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included accessories: - Hose set - Pressure regulator - Ground cable - Basket coil adapter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 900 mm weight of the machine ca.: 95 kg dimensions of the machine ca.: 900 x 450 x 850 mm Technical Specifications Continuously adjustable range [A] 35â250 Duty cycle (DC) at Imax. (10 min) [%] 40 Welding current at 100% duty cycle [A] 170 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included: - Hose set - Pressure regulator - Ground cable - Spool adapter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26036 Technical data approx.: - Load capacity approx. 3000 kg - Face plate diameter 1520 mm - Face plate can be tilted by motor - Rotary movement electr. infinitely variable - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Re- + counterclockwise rotation - Handheld remote control - Footswitch - Space requirement approx. W 1700 x H 1500 x D 2300 mm - Weight approx. 2800 kg

MERKLE M 284 K Welding machine Manufacturer MERKLE Model M 284 K Condition untested Location 35614 Aßlar DE Lot 64

• Incl. jaw chuck, jaw width: 200 mm • on mobile base frame

Additional technical specifications: • Hole diameter: approx. 30 mm • Distance from hole center to hole center: approx. 100 mm

• Hole diameter: approx. 30 mm

Incl. welding fittings and welding material.

Seriennummer: 21072X17

• Incl. hose package • for all further welding data see photographed type plate!

Attention: probably defective!

EWM MIRA 301 MIG KGE Welding machine Manufacturer EWM Model MIRA 301 MIG KGE Condition untested Location 35614 Aßlar DE Lot 53

Incl. 3-jaw chuck, diameter: 120 mm.

Additional technical specifications: • max. negative pressure: 2400 Pa • max. volume flow: 1000 cbm/h

Additional technical specifications: • Number of holes: approx. 1800 • Hole diameter: 16 mm • Accessories: incl. various construction accessories such as clamps

Additional technical specifications: • Secondary short-circuit current: 22.4 kA • Open-circuit voltage: from 1.8 to 3.6 V

Seriennummer: 0000213437

TEKA FILTOO Welding Fume Extraction Unit Manufacturer TEKA Model FILTOO Year 2017 Condition untested Location 73529 Schwäbisch Gmünd DE Lot 13

Consisting of various welding wires, including SG ALMg 3; for thicknesses, weights, manufacturers, and types, see pictures.

Additional technical specifications: • Hole diameter: 30 mm • Distance from hole center to hole center: 100 mm

Auflagefläche: ca. 2330 x 1500 mm

Attention: for all welding technical data see photographed nameplate! Attention: without the gas cylinder seen in the photos

Seriennummer: 978002, Betriebsspannung: 230 V, Frequenz: 50 Hz, Nennstrom: 7 A, Anschluss: 1,1 kW

SOYER BMS-901 Stud welding machine Manufacturer SOYER Model BMS-901 Condition untested Location 35614 Aßlar DE Lot 11

For all further data, see the photographed nameplate.

KEMPER Welding fume extraction unit Manufacturer KEMPER Condition untested Location 35614 Aßlar DE Lot 61

Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

chucking diameter: 315 mm table load: 300 Kg swivelling range: Grad turning speeds: 0,1 - 4,0 U/min connected load frequency: 220 V bore diameter: 63 mm weight: 0,09 t Dimensions (LxWxH): 0,8 x 0,6 x 1,2 m Welding turntable incl. - 315 mm chuck - 3-axis torch holder - Cutting torch - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 14009001500 mm over wi ...

Large basket welding machine, Fabr. ZÜBLIN Machine data of the automatic welding machine: - Inner reinforcement diameter range: 1,465 - 4,100 mm - Diameter of the longitudinal wires: 6-10 mm - Number of longitudinal wires: 12 or 24 - Length of cylindrical reinforcement: any mm - Weight of the entire system: approx. 26.0 t - Foundation dimensions: approx. 14.0 x 11.5 m - Basket in basket production possible, i.e. for large-diameter pipes that have to be manufactured with a double basket from a static point of view - This system can also be used to produce baskets with bells

Travelling base and rails, welding head, controls and flux-handling components A6 Arc Master, LAF 1000, power slides and flux recovery . The column is eccentric, which means that the welding head is always lined up in the centre of the carriage. This to be able to weld round objects with turning rolls on the same rail. The CaB 300S can reach over high and long distances, both vertically and horizontally. The ±180° column rotation facility provides a total action radius. Extension (max mm) 5580

Gedreven Toerental : 60 - 1250 tpm Diameterbereik : 2700 - 6500 mm 4 in stock Max weight on both supports: 25 ton Adjustable in height: yes Number of wheels: 4 Motorpower: 20 kW / 16A Voltage: 3 x 400V Weight: 1290 kg

1. Left device: Cloos GLC 556 (MIG/MAG welding machine) Type / Model: Cloos GLC 556-C (robust industrial device series with separate wire feeder case) Process: MIG/MAG welding power source for professional industrial and workshop use Welding current: Strong power in the upper ampere range (designed for heavy welding work up to approx. 550 A) Mains connection: 3-phase three-phase current (400 V) Construction: Two-part system consisting of a compact power source (on trolley) and an external wire feeder connected by an intermediate hose package Special feature: Often equipped with integrated liquid cooling for the welding torch 2. Right device: Linde MIG 200 (MIG/MAG welding machine) Type / Model: Linde MIG 200 (compact workshop and assembly device) Process: MIG/MAG welding machine (mixed gas / CO2 or suitable for flexible use) Welding current ...

TRUMPF HL 54 P is a Impuls Schweissanlage, entwickelt für präzise, hochgenaue und zuverlässige Anwendungen. Arbeitskapazitäten nicht angegeben. Leistungsaufnahme 2.5 kW; Anschluss 50 Hz 3x 400 V; Gewicht ca. 220 kg; Abmessungen L600×B1020×H840 mm. Keine spezifischen Zubehörteile aufgeführt. Ermöglicht enge Toleranzen; typische Bereiche: Automotive, Luftfahrt, Uhren, Medizintechnik, Werkzeugmaschinen. Technische Daten ohne Gewähr

TRUMPF TrumaWeld L1000 laser welding system – built in 2004 For sale is a used TRUMPF TrumaWeld L1000 laser welding system for industrial laser processing. The system has a large work table of approx. 2,000 x 1,000 mm and enables flexible positioning of workpieces. It is particularly suitable for precise laser welding work on metallic components. Technical data: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: TrumaWeld L1000 Year of Make: 2004 Serial / Machine Number: A0460A0007 Mains connection: 400 V / 50 Hz Connected load: 11 kVA Control voltage: 24 V DC Required fuse: 3 x 16 A Compressed air connection: 7–10 bar Inert gas connection: argon, 10 bar Work table: approx. 2,000 x 1,000 mm Total dimensions: approx. 2,000 x 1,800 x 2,050 mm The machine is currently in storage and is not connected. An inspection under power or an up-to-date functional test is ...

Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table, welding fixture, circumferential seam welding machine -Manufacturer: Carl Cloos, Welding rotary device type CD 100 SR -Turning length: 1030 mm -Turntable: Ø 500 mm, tiltable -Peak height: 375 mm -Speed: electrically continuously variable 0-3.5 rpm -Control: via foot pedal -Burner stand: manually adjustable -Tailstock: with pneumatically operated quill, 90 mm stroke -Transport dimensions: 2025/800/H1350 mm -Weight: 400 kg

2 x Oerlikon Citoline 3000T welding machines

Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system -Manufacturer: Heinz Soyer, stud welding machine with stud welding gun -Type: BMS-8H -Connection voltage: 230 V / 50/60 Hz -Stud welding gun: PS-3K -Welding area: Bolts and pins from M3 – M8 or Ø 2 – 8 mm -Quantity: 1x stud welding machine available -Dimensions: 350/350/H270 mm -Weight: 15.4 kg

CONTROLS   conventional FEEDSTOCK STEEL STRIP   sheet thickness max.: 3 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 139 mm ROLL FORMING LINE P110K I am providing the list of profiles and tubes that we used to manufacture on the TEGALNIK P110K line! Open cold-rolled steel profiles made from cold-rolled (CR) and hot-rolled (HR) strip: Steel angle profiles (Equal angles): • 15 x 15 x 1.5 mm • 20 x 20 x 1.5 mm • 20 x 20 x 2 mm • 25 x 25 x 3 mm • 30 x 30 x 3 mm Steel U channels: (Width x Height x Thickness) • 10 x 15 x 1.5 mm • 15 x 15 x 1.5 mm • 18 x 20 x 1.5 mm • 20 x 20 x 1.5 mm • 25 x 20 x 2 mm • 25 x 25 x 2 mm • 30 x 20 x 2 mm After modifying the machine, we also manufactured welded stainless steel tubes in the following dimensions using a special process: Round stainless steel tubes: • ø 16 x 1.5 mm • ø 18 x 1.5 mm • ø 20 x 1.5 mm • ø ...

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kW volume capacity: 20.000 m³/h weight: 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter are ...

GENERAL CHARACTERISTICS: Stand-alone technological tooling dedicated to a specific operation in an automated production line. It is characterized by a massive, open central frame and unified, heavy clamping units. The device works directly with industrial robots in the thermal hazard zone, having advanced installation protection and a dedicated mass current dissipation system. LIST OF COMPONENTS: 1. DESTACO main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle scale (range 5-135°) facilitating collision-free loading. 2. Eye bolts (transport eyelets) – 4 pieces. 3. Copper ground blocks (welding ground) – approx. 2 terminal points. Thick copper connections to protect electronics and positioner bearings from welding current. 4. Electro-pneumatic box (I/O junction box) – 1 piece. A collection enclosure for signals fr ...