weishaupt 70 used for sale

Upright delivery with pressing rollers Make OMG Model Economic P/700 Year 2006 Speed up to 30.000 Minimum size 100 x 110 mm Maximum size 330 x 700 mm

- RCI Console - Pallet feeder with suction belt - PIAP Vaccum & Blow System at feeder / delivery - Roland Deltamatic dampening units - TECHNOTRANS beta.c cooling device (water cooled) - Ink temperature control - InkLine - APL plate change - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Perfecting 2/4 or 6/0 - GRAFIX Drytronic IR Dryer - Powder extraction - GRAFIX Hitronic powder spray - High pile delivery

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Transnorm conveyor belt GF 16600-700-600 RA2455 Technical data: Conveyor length (NL): 16600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 0,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 16600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s ...

Width 76 cm Year of construction 2009 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Vibrating device Pressing station max. infeed width 760 mm - 1 panel max. infeed width 235 mm - 3 panels Small format device for stacking height 3 - 20 mm Output up to 600 stacks / h Steel / HD - Interface / Interface Price on request. Worldwide delivery & installation.

Transnorm belt curve conveyor left GKF 90°-700-500-IR450 - NEW RA2313 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 450 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 0,67 scope of delivery: without suppor ...

Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

GENERAL Project No.: 905817 Quantity: 1 pcs. Manufacturer: DMG MORI Type: MillTap 700 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Approx. (hrs): 8038 Spindle Approx (hrs): 1166 Program run approx. (hours): 1389 DESCRIPTION MILLING Travel in X 700 mm Travel in Y 420 mm Travel in Z 380 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. acceleration in X/Y/Z 10/10/18 m/s2 Direct displacement measurement system X/Y/Z Tool holder BT 30 Max. speed milling spindle 24000 1/min Max. power at ED 10-40/100% 16.3/6 kW Max torque at ED 10-40/100% 48/30 (78 max) Nm Disc tool magazine 25 stations Chip to chip time 1.7 s Machine table 840x420 mm OTHER EQUIPMENT IR Workpiece Probes Tool measurement by means of a probe Splash protection cladding with fully encapsulated working area Oil/Emulsion Mist Extraction System  ...

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 700, Control panel: Stainless steel Control box, Controls, Thermomete ...

SK40 milling head, with flange, with quill and tool clamp, swivelling. good condition. Is from a CNC tool milling machine MAHO 700C, We would also have a smaller one from a DECKEL FP3A. Also with quill and clamping. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...

Fabricante MORI SEIKI Modelo NLX2500SY/700 Mes / Año 12/2011 CNC MORI SEIKI M730 BM Capacidades Volteo sobre bancada/carro 590/360 mm. Diámetro máximo torneable 460 mm. Longitud máxima torneable 795 mm. Paso de barra 80 mm. Eje Y INCLUIDO Recorridos y avances Recorrido eje X/Z 260/795 mm. Rango eje Y ±50 mm. Recorrido sub-cabezal eje B 734 mm. Avance rápido ejes X, Z, B 30.0000 mm/min Avance rápido eje Y 10.0000 mm/min Avance trabajo ejes X, Y, Z, B 0-5.000 mm/min Cabezal Eje C en cabezal INCLUIDO Indexación eje C cabezal 0.001º Velocidad cabezal 4.000 rpm Número gamas velocidad cabezal 2 Tipo nariz cabezal JIS A2-8 Diámetro paso cabezal 91 mm. Potencia motor principal 18.5 kW Sub-cabezal Eje C en sub-cabezal INCLUIDO Indexación eje C sub-cabezal 0.001º Velocidad sub-cabezal 6.000 rpm Número gamas velocidad sub-cabezal 1 Tipo nariz sub-cabe ...

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please enquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please enquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

Maximum Trimmed Size: 355 × 340 mm, Minimum Trimmed Size: 120 × 75 mm, Maximum Folded Size: 360 × 350 mm, Minimum Folded Size: 130 × 105 mm, Included: Integrated MBO Folding Unit with Control Console, Equipped with: Central Control Panel with Touchscreen and Function Keys, Hohner Stitching Heads, Gathering Station with Multiple Feeders, Folding and Stitching Section by MBO, Three-Knife Trimmer, Delivery Unit with Conveyor and Stacking Table

Dough Sheeter Fritsch Rollfix 700 Bj: 2020 used dough sheeter Fritsch 700 with digital control and automatic reel from 2020 for sale and immediately available in our warehouse in Bielefeld. Dough sheeter Fritsch 700 - Stainless steel dough sheeter Fritsch Rollfix - with reel - With touch display - 65cm belt width - Band length one side 183cm - Year of construction 2020

CNC gantry flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of Make: 1995 CNC Control: Global Control Plus Track width: 7,000 mm 8 x oxy-fuel burner type ALFA 8 x Omnilift 200 Without a running track Without table Without filter Reference Number: R2137

This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information.

Demonstration machineThe new briquetting press 70F from Holzprofi impresses with its sophisticated, simple and solid construction.The press is designed for trade and industry.Made in EU ! Technical data:Motor output power 100% ED 7.5 kW Briquette diameter 70 mmPower consumption approx. 4900 W/h Capacity 60 - 80 kg/h Chip bunker 0.75 m³Weight 810 kgWeight briquettes approx. 900 - 1100 Kg/m³Sound pressure level less than 70 dBAdimensions: 2220 x 1200 x 1510 mm

This OMRON TM5-700 robot arm was manufactured in 2019. It is designed for precision and efficiency in automated tasks. Ideal for industries looking to enhance their automation capabilities. Contact us for more information.

This Johnford SL-70A was manufactured in 2006. A robust horizontal turning machine featuring a swing over bed of 700mm and a swing over cross slide of 540mm. It has a spindle bore of 115mm and a bar capacity ranging from 91 to 102mm, suitable for diverse turning tasks. Consider the opportunity to buy this Johnford SL-70A horizontal turning machine. Contact us for more information about this machine.

General SKU397W1584 MakeAzo TypeDFS 70X1200 NE300 No.1253743-01 Year of construction2015 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter300 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter60 mm Pitch60 mm Shaft diameter65 mm Screw length1200 mm With hoppercheck Inlet300 mm Outlet65 mm With motor0.37 kW, 220-242/380-420 volt, 1380 rpm Screw speed85 rpm Information LocationBarneveld Floorspace1,80x0,46 n Total height0,35 m Weight90 kg CEcheckMetering screwsAZODosing units > Metering screwsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...

This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, its equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine.

Knoll High Pressure System KF 110/700 Year of Make: 2017 Paper Belt Filter Tank capacity: 600 litres Mas. Pressure: 70bar Little used. Like new

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

Manufacturer: Essemtec Model: CSM 7000 Plus (without feeder, with nozzle) Find more here - / Contact us at -

This 3-axis Hartford HV-70S was manufactured in 1998. It features a maximum speed of 3500 rpm and a tool magazine with 20 slots, ISO 50 type. The working range includes X=1500, Y=800, Z=650 mm, and table dimensions of 1750x750 mm. Various tool holders are included. Contact us for more information.

roller conveyor 1500/2500/3000-740-700 RA2294 Make: Blume Roller width (RB): 700 mm Nominal/outer width (NB): 740 mm Length: 1500/2500/3000 mm Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: good (used) Nominal / outside width in mm: 760 Roll width in mm: 700 Roll division in mm: 100 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003

This Victor Vcenter-70APC Vertical Machining center was manufactured in the year 2007 in Taiwan. It is controlled by a Fanuc Series Ou-MC control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. This machine has head repaired, Z-Spindle, telescopic with new wiper blades and the grippers of the changing arm also repaired. Includes an internal cooling, new bearings and new tie rod springs.

Fanuc manipulatierobot die een last van 700 kg kan hanteren Het heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter.

This 3-axis Mazak VCN 700E/40-II vertical machining center was manufactured in 2013. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this Mazak VCN 700E/40-II vertical machining center. Contact us for more information.

General SKU311X478 MakeRiera Nadeu LocationBarneveld CEcheck TypeRina 700F 800X400 PI Main Features MaterialHastelloy Motor37 KW Inlet diameter100 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesø 800 mm Max. loading weight125 kg Motor37 kW (400 V, 1480 rpm, (Ex)) Max. basket speed2150 rpm Hydraulic operatedcheck With hydraulic unitcheck InletDN100 Solids outletDN150 Liquid outletDN100 MaterialStainless steel 2.4602 (Hastelloy C-22) Information No.10573 / P19 / 00718 Year of construction2020 Mounted on foundation platecheck Floorspace2,626 x 2,250 m Total height1,930 m Weight8900 kg Extra SpecificationsProduct density 1250 kg/m3, G force 2000 G, :Peeling centrifugesRiera NadeuCentrifuges > Peeling centrifugesBrand > Riera Nadeu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information.

Key data: 7000 , 6785 , 120

Presse à injecter NEGRI BOSSI 700 T Vector Type : V700-12000 Commande : DIMI EL II Force de verrouillage : 700 T Diamètre vis : 120 mm Volume injectable : 6785 cm3 Pression d’injection : 1620 bars Course d’ouverture : 1000 mm Dimensions des plateaux : 1410 x 1310 mm Distance entre colonnes : 1000 x 900 mm Epaisseur moule min/max : 400 - 1000 mm Vis d’injection bi métal 2 noyaux hydrauliques Interface robot Dimensions : 11 x 2,34 x 2,40 m

This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, its ideal for precise tube cutting. Contact us for more information about this machine.

Technical data of the pallet rack crossbar: Shelving system: Jungheinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, new Material colour: RAL 1007 daffodil yellow Box profile: 140 x 50 mm Truss type: AUF ́B ́E0444 Agraffe: 4 HK (hooks) Clear width: 2,700 mm 02x Safety pins, new Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

This TRUMPF TruLaser Cell 7040 was manufactured in 2015. It features a large working range with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 4000 Watt CO2 laser, it excels in both thin and thick material cutting. Additional features include CNC automatic scanning, height detection, and a Siemens 840D control system. Consider the opportunity to buy this TRUMPF TruLaser Cell 7040 CO2 laser cutting machine. Contact us for more information.

This TRUMPF TRUBEND CELL 7000 was manufactured in 2014. Its a high-speed automatic bending system, ideal for small to medium-sized sheet metal parts. Features include a press brake, robotic handling, and an integrated feeding system. The machine is in excellent condition, comes with a large set of bending tools, and is ready for loading. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 7000 machine we have for sale. Contact us for more information.

This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4 color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine.

This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4 LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine.

This KEYENCE IM-7030T was manufactured in 2018. It features a digital measuring projector with a 300x200 mm measuring field, light probe, and height probe. Accessories include a control unit, AC power cable, mouse, keyboard, and a user manual in German. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information.

Key data: 700 kN

Arburg 320K 700-250 with the Arburg Multilift H side robot Year of Make: 2005 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 70 t Tiebar spacing: 320x320 mm Size of the clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air Valve x 3 Control with hot runners Hardened injection unit - Bimetal Central lubrication Dimensions: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On requ ...

This 3-axis Zimmer+Kreim Genius 700 Magic 3 was manufactured in 2009. It features a table with T-slots, dimensions of 575 x 500 mm, and a 24-position electrode changer. The machine can handle a maximum workpiece weight of 700 kg and offers a travel range of 400 x 350 x 350 mm. Consider the opportunity to buy this Zimmer+Kreim Genius 700 Magic 3 die-sinking EDM machine. Contact us for more information about this machine.

Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of Make: 2009 Injection unit: Screw diameter: 30 mm Injection weight: 65 g Spray pressure: 1390 bar Dosing volume: 71 ccm Clamping unit: Clamping force: 70 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Machine Operating hours: 33,544 in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced Injection Units - Bimetal Proportional valves on sprinkler units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Machine with b ...

This KEYENCE IM-7030T optical measurement machine was manufactured in 2020. It features a digital measuring projector with a 300 x 300 mm measuring field, height probe, and photograph sensor. Accessories include a flat stylus, AC power cable, and a control unit. A mouse, keyboard, and a German user manual are also provided. Contact us for more information about this machine.

Arburg 320K 700-100 Year of Make: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Spray pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Tiebar spacing: 320x320 mm Size of the clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - Bimetal Central lubrication Original Arburg mould crane, 2 lifting speeds, lifting capacity 100 kg Dimensions: Weight: 2170 kg Length/Width/Height: 2.94x1.45x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 4.9 kW Total power: 15.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.  ...