weishaupt 70 used for sale

A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible.

Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.

Maximum Diameter: 630 mm

Key data: 1500 kN, 415 g/PS, 55 mm

Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!

Size: 740 x 1040 mm Impression: 206 Mio. Equipments: Autoplate PPL (Power Plate Loading) CCI (Color Contamination Check) Max. sheet size: approx. (104 x 74) cm (40 x 29 inches) or (1020 x 715) mm

roll diameter: 700 mm roll length: 1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-roll L-calender 700x1800 - used - BUZULUK 4-roll L-calender 700x1800 Type: 04706/P1 - Reverse L-shaped roller arrangement - The system was used for the production of PVC films - Film thickness: 0.05 - 1 mm - Can also be used for rubber - Maximum product width: 1,600 mm - Working speed: 6 - 60 m/min - System features roll bending and cross axis - BUZULUK temperature control and stretching device behind the calender - Year of manufacture: 1996 - Consists of 13 stretching and pulling rollers behind the last roller of the calender - The device is supplemented by 4 polishing rolls, - these 4 polishing rolls are temperature-controlled, - all rolls are driven via cardan joints, - all rolls can be temperature-controlled and  ...

5 Printunit Offset + Coater unit RCI + Color Pilot, APL full autom. all washer Inktemperature Control ELTOSCH TL/IR Dryer Grafix Hitronic, AirGlide Delivery special Grippers approx. 260 million impressions

Manufacturer: Zerma Model: GSE 700/1000 Year of Manufacture: 2021 Inlet dimensions: 720 x 990 mm Rotor diameter: 700 mm Working width: 1000 mm 7 x 2 rotor blades 2 stator knives Sieve insert: 10 mm Ø Drive 75 kW, 1500 rpm, IP 55, 400 V, 50 Hz, IE3 The machine has not yet been assembled or put into operation and is therefore in mint condition. Feed Belt (Bias Belt 1) - Length (AA): 6000 mm - Width (GB): 980 mm - Drive: 1.5 kW - PVC stud belt with lower belt cover - Equipped with 2 × emergency stop buttons Switchgear - Load-dependent control - Mounted on a separate frame Extraction System – MFT 55/500 - Power: 11 kW - Pipeline: NW 200 mm Ø - Rack for bagging into double big bags - Cyclone: 800 × 2400 mm - Exhaust box with 12 exhaust hoses Metal Separator - NW 150 mm Ø - Quantity: 1 piece Fine Material Separator – Type FAS 500 - With MFT 30/300 blower (4 kW) - C ...

turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm Number of working hours: 19.552 h Cutting time: 10.704 h spindle drive: 18,5 kW total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary indexing table, positioning table, TC 700 T, Weiss, mint condition Special price The current market price of a comparable new rotary indexing table is approximately €13,600 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! A new rotary indexing table from a production company's spare parts warehouse. The part has never been used and is in mint conditin. Rotary indexing table, positioning table, TC 700 T, Weiss, as good as new, 1000 x 820 x 380 mm, 660 kg, Table D700 mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect  ...

Rotor Dia. x W: 1.000 x 700mm - Included: 55 kW Electrical motor, Inlet, Hydraulic pump with control panel, 500 KG Service Crane. Many spare-parts in stock! Crusher can be sandblasted and painted.

2 Pcs. Weserhütte EB 1.000 x 700/650 mm for sale. Electrical motor included, crusher can be sandblasted and painted.

Keyence HIGH-ACCURACY CCD MICROMETER LS-7001 + LS-7030T / LS-7030R. More items - new and used - can be found in our shop! International shipping costs on request! H2R7A15K35-PD

B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 710MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 237 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/134, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8V71N 7083-7000; Transport weight [kg]: 1050

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/107, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71N 7083-7000; Transport weight [kg]: 1240

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/101, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71N 7083-7000; Transport weight [kg]: 1260

turning diameter over bed: 1030 mm turning diameter over slide rest: 800 mm turning length: 3200 mm turning diameter: 900 mm control: FANUC 31i B : 165 mm spindle cone: ASA A1-15 travel -x axis: 470 mm travel -z axis: 3235 mm rapid travel - longitudinal/face: 12 / 10 m/min Measuring Speed: 3 - 1500 1/min spindle drive: 45 / 37 kW max. workpiece weight between centres: 7300 kg max.workpiece weight:each extra steadyrest: 1600 kg tail stock: tailstock adjustment: 3135 mm tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm tailstock quill taper MT: 6 total power requirement: 64,44 kVA weight of the machine ca.: 22 t dimensions of the machine ca.: 7,36 x 2,77 x 2,78 m High-precision turning centre - 3-jaw chuck dia. 800 mm - FANUC 31iB CNC control - Tailstock - Hydraulic steady rest - 12-station tool turret (32 x 32 mm) - Chip conveyor - Coolant system - Tool setter - CE The da ...

CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp H ...

Key data: 700 mm

4-jaw face plate - Ø 700 mm - Material: Cast iron - Damage to a threaded head, function given - Diameter: 700 mm - Through-hole: 125 mm - Body width: 110 mm - Total width: 155 mm

Densitometer GretagMacbeth DensiEye 700, serial number: 0486.

Manufacturer: Vitronics Model: 7038 Year of Manufacture: 2004 Power: 55 kVA Voltage: 3 × 400 V Frequency: 50 Hz Machine Weight: 2700 kg Air Pressure: 6 bar N₂ Pressure: 6 bar N₂ Consumption: 50 m³/h Largest Load: 63 A Find more here - / Contact us at -

screw ø:: 70 mm screw length:: 22D screw speedl:: -- U/min Condition: used Specification: rubber extruder line – used COLMEC Extruder, Hot Air Channel, Cooling Bath Consisting of: Extruder COLMEC 70 x 22D - Screw diameter: 70 mm - Screw length approx.: 22D - Extruder motor power: 37 kW - Cooling unit for extruder Hot air oven: - Hot air oven power: 80 kW - Fan power: 2x 0.36 kW, 2x 1.5 kW - Stainless steel cooling bath The system is in good condition and was still in operation until approx. 6 months ago - Sold as seen. The buyer is responsible for safety regulations. Without CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 356 mm turning length: 705 mm control: M730 UM Mapps CELOS greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 80 (91) mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm C-Axis: 0,001 ° axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1 power capacity - driven tools: 5,5 / 4,2 kW total power requirement: 41 kVA weight of the machine c ...

Technical data of the pallet rack crossbar: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Type: SKVBN 09850NP33 Clasp: 2 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 1,600 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Reference Num.: 4318 Brand: Xerox Type: DC 700 Construction year: 2013 Impressions: 4 mio Available: directly Status: In production Location: Deutschland Equipment: - Duplexdruck - Scanner - Brosch?renfinisher - Fiery

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control. Accessories: Cooling package HRS050 L/W, sieving station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder container, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, inspection possible by arrangement.

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

- Tool eye - SMW 3 chuck 630-165 mm - SMW Steady rest 85 - 350 mm - LNS Chip conveyor - DORMATEC Air Filter 30 m3

Control: Siemens Sinumeric 828 D Turning length: 1,600 mm Turning diameter: 900 mm X axis travel: 470 mm Z axis travel: 1,650 mm Speed: 3 – 1,500 rpm Tool turret: 12 places (all driven) Tool holder: BMT 85P Equipment: Self-centering bezel Conveyor Touchsetter 3-jaw chuck Programmable tailstock Aspirator Coolant pump 20bar with cyclone filter Oil mist extraction

Height=1.85 m, Overall length= 1.18 m, Overall width= 0.9 m, Net weight= 122 kg,

Dimensions (L/W/H): 1130x500x1250 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2020x920x1160 mm Weight: 680 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1106x883x543 mm Weight: 195 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 500x550x1050 mm Weight: 80 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JOULIN vacuum handling system for wooden boards, type 700T C, Manufacture year 2020, - Wood length 600 – 6400 mm, - Max. layer weight 900 kg, - 8 vacuum grippers, - Removal system for stacking sticks, - Electrical cabinet, including PLC / touch screen

Reference Num.: 4340 Brand: Xerox Type: DC 700 Construction year: 2011 Impressions: 7 mio Available: directly Status: Not in production Location: Deutschland

Looking for a used Doka concreting platform that’s ready to go, system-compatible, and full of smart features? Then the Framax U concreting platform is the right choice for your project †compact in delivery, fast to assemble, and flexible in use. 🎯 Why it belongs on your jobsite: ⚡ Pre-assembled and craneable †ready for action in just a few simple steps 📐 Compatible with multiple Doka systems: †Framax Xlife †Alu-Framax Xlife †Frameco †Top 50 (with adapter) †FF 20 (with adapter) 🛠 Smart design with deck, guardrail & ladder †all included 💡 Ideal as a used concreting platform for Doka formwork systems 💰 Strong pricing depending on configuration †you choose what fits your budget best 📦 Quickly available & easy to deploy †perfect for project peaks, system extensions or pe ...

Frami †the perfect choice for your construction project! Are you looking for durable and robust formwork elements to support your construction project? Our Doka Frami Xlife elements in 2.70 m and 3.00 m heights offer exactly what you need †with easy handling and versatile applications. 🛠 Durable & reusable †thanks to the robust Xlife coating ⚡ Light & efficient †for quick and easy processing 🔁 Versatile †ideal for various construction projects Order now and benefit from proven quality! 🚀 📞 Good to know: The right accessories are also available directly from Form-on . Feel free to contact us by phone or email for further details! 🔍 Classification: Unchecked, with strong signs of use and concrete residues, but repairable and suitable for simple applications. Price: from € 116,00 / PCS (excl. VAT). Partial  ...

Frami †the smart choice for your construction project! 🔧 Are you looking for robust formwork elements to support your construction project? Then youve come to the right place! Our Doka Frami Xlife elements in 2.70 m and 3.00 m heights impress with durability, easy handling, and flexible application options. 🏗️ ✔ Reusable †the durable Xlife coating ensures a long service life ✔ Lightweight & efficient †for quick and easy processing ✔ Versatile †ideal for various construction projects Order now and benefit from proven quality! 💪 📌 Good to know: The right accessories are also available directly from Form-on . Feel free to contact us by phone or email for more information! 🔍 Classification: Shows signs of use but is suitable for simple applications. Price: from € 118,00 / PCS (excl. VAT). Partial qu ...

Framax Element 2.70 m †Compact, Strong & Efficient! ✨ Need a handy formwork panel that still delivers top performance? Then our Framax Element 2.70 m is the perfect choice! 🚀 ✔ Lightweight & durable †thanks to a powder-coated aluminum frame ✔ Fast connections †integrated locking system & continuous groove for easy handling 🔁 ✔ Long-lasting & resilient †Xlife Framax panel, screwed from the back ✔ Maximum flexibility †ideal for various applications on-site Compact power for efficient work ! 🔥 Get your Framax Element 2.70 m now at Form-on!  🛒🚧 Price: from € 170,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to use. Uncleaned condition. Heavily used formwork & scaffo ...

Used Doka Framax wall formwork panels 2.70 x 2.70 m †equipped with durable Xlife panels for large-area forming with a crane 🚀.   The elements are inspected and thoroughly cleaned , ready for immediate use. Size  signs of wear & concrete residues on the frames and panels show that these formwork elements have already done a great job 💪.   The elements are bundled on timber skids for delivery. A truck with a width > 2.70 m is required for transport 🚛. A smart package for anyone who values proven Framax quality while enjoying a top-notch price-performance ratio ✨. Price: from € 998,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requi ...

Framax Element 2.70 m †Compact, Strong & Efficient! ✨ Need a handy formwork panel that still delivers top performance? Then our Framax Element 2.70 m is the perfect choice! 🚀 ✔ Lightweight & durable †thanks to a powder-coated aluminum frame ✔ Fast connections †integrated locking system & continuous groove for easy handling 🔁 ✔ Long-lasting & resilient †Xlife Framax panel, screwed from the back ✔ Maximum flexibility †ideal for various applications on-site Compact power for efficient work ! 🔥 Get your Framax Element 2.70 m now at Form-on!  🛒🚧 Price: from € 291,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up ...

🔵 Frami as far as the eye can see! 🔵 Looking for high-quality formwork elements? Then you’ve come to the right place! We offer Doka Frami Xlife elements in heights of 2.70 m and 3.00 m †the perfect solution for efficient and durable formwork. ✅ Robust & durable †thanks to the Xlife coating for high reusability ✅ Lightweight & efficient †ideal for quick and easy handling ✅ Flexibly combinable †suitable for various construction projects Get your Frami Xlife element today and benefit from quality that convinces! 💪🏗️ Price: from € 310,00 / PCS (excl. VAT).Price valid: per total quantity Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 2.70 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨 ⚙ 🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 460,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 5 x Framax Xlife plus panel C  ...

Maximum efficiency with Frami! Are you looking for reliable formwork elements for your construction project? Then we have just what you need! Our Doka Frami Xlife elements in heights of 2.70 m and 3.00 m impress with their quality, durability, and ease of handling. 🔧 ✅ High reusability †thanks to the robust Xlife coating ✅ Lightweight & practical †for quick and efficient processing ✅ Versatile use †ideal for a wide range of construction projects Get yours now and benefit from proven professional quality! 🚀 💡 Good to know 💡 We also have the necessary Frami accessories available in stock at Form-on †just ask us! Price: from € 168,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding ...

Framax Element 2.70 m †Compact, Strong & Efficient! ✨ Need a handy formwork panel that still delivers top performance? Then our Framax Element 2.70 m is the perfect choice! 🚀 ✔ Lightweight & durable †thanks to a powder-coated aluminum frame ✔ Fast connections †integrated locking system & continuous groove for easy handling 🔁 ✔ Long-lasting & resilient †Xlife Framax panel, screwed from the back ✔ Maximum flexibility †ideal for various applications on-site Compact power for efficient work ! 🔥 Get your Framax Element 2.70 m now at Form-on!  🛒🚧 Price: from € 252,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitab ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 2.70 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨 ⚙ 🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 351,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 37 x F ...

Compact, lightweight, and immediately available †this set of used Alu Master formwork panels is the ideal addition to your existing system . 🚧 With approx. 30   m ² , it offers maximum flexibility for smaller jobs or targeted system expansions †cost-efficient, crane-independent, and ready to use . 👉   Only €2,275  for the complete set! What makes the Alu Master so smart:   Aluminum hollow-chamber profile †lightweight & easy to handle, perfect for crane-free formworking Compatible with Stahl Master formwork †seamlessly integrates into your existing setup Powder-coated & easy to clean †for clean results with minimal effort   Perfect for small teams & quick projects †efficient, flexible, well-designed ✨ Secure it now †used ...

Only 5 hrs. Traded-in from customer who needs more power., Warranty is still applicable., Used Generator Set.; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 320