weinig moulder used for sale

Paoloni TX 145L Table milling machine Table milling machine 45° swivel Digital Height adjustment digital Motor 5.5 KW 50 HZ 400V Table length 1.5m with roller B=1.2m Spindle 30mm Table opening 300mm Excerpt Built in 1995 Weight 560 kg G&-5039-M3W1R VAT not deductible!

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

SPECIFICATIONS: Workbench: 1100 x 900 mm Manual adjustment Installed power: 9 kW Engine brake Equipment: 01 Drive (0.37 kW)

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

SPECIFICATIONS: Spindle diameter mm: 35 Installed power HP: 7.5 Spindle brake Sliding transport trolley at the front

Table milling cutter cutter with sliding table Type SK 2/4 Table size 1040 mm x 900 mm 2 table inserts diameter 440 mm and 120 mm Spindle diameter 30 mm Spindle length 125 mm Revolutions 3000/4000/5000/6000/8000/10,000/rpm. Motor power approx. 5.5 kW With 3 rollers of feed wood-made Sliding table table surface 770 mm x 400 mm Sliding distance 1200 mm Weight approx. 700 kg

Spindle tenoning machine SCM T130 Motor power 7,5kw Machine control from puplite Electric spindle setting Sidecar for trunnion Total spindle height 200mm Spindle diameter 40mm Variable rotation on the belt Spindle speed 3000/4500/6000/7000/10000rpm CE Certificate Extraction nozzles 2x120mm

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

Technical data (subject to change) spindle for cutter mandrels MK5 Adjustment of the spindle height by handwheel Table opening can be adjusted via insert rings Speed change via belt reassignment (3,000 / 4,500 / 6,000 / 9,000 rpm) Brake by foot pedal Weight approx. 600-700 kg

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Overview  The KSB4000 blowing machine was manufactured in 2002 by the Austrian manufacturer KOSME. This machine can produce 0.5l, 1.5l & 2.0l bottles. Technical details  Capacity: 4.000 bph 4 cavities Scope of delivery  Preform feeder, Three types of molds for 0.5L, 1.5L and 2.0L bottles

Overview The machine built in 2015 by Lithuanian manufacturer FlexBlow. The machine has been overhauled and new dumper, hopper and unscrambler will be built. The machine is already disassembled. Please note that the picture of the advertisement is for reference only.  Techn. Details  Capacity: 5.500 bph (at 1,0l)  Number of cavities: 4  Max. bottle neck: 48 mm Max. bottle size: 2,0l  Previously used neck size: 38 mm  Spare parts, blow molds and new set of neck specific parts can be purchased additionally Siemens controller and English operational language

Overview The BLOMAX 16 blow molder was manufactured by the German company Krupp Corpoplast (now KHS) in 2000 and until recently was part of a PET filling line at a major Austrian beverage bottler. The blow molder is now becoming available as the owner is investing in a completely new line. Technical details Output: up to 24,000 bph 16 cavities Volume: 0.2 - 3.0 l  Peripherals  Preform feeder | Tanner AG | SBT-3012 | -  Tipper  Silo Lift  Sorting  Chute

Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL

year: 2015 max. working pressure: 42 bar rated power: 37 kW rotational shaft speed: 401 r/min. Keeping your production up and running 24/24 Designed for industrial service 24/24, Atlas Copco DX/DN compressors work reliably at all times without the need for constant supervision. Their sturdy design leads to extremely low vibration levels. Proof of their reliability can be found in the thousands of machines installed in the field, where they provide a smooth and reliable supply of air or nitrogen. Protecting your process with oil-free technology Oil-free compression safeguards the quality of the compressed air and nitrogen. In most applications, even the slightest pollution is unacceptable and could lead to high risks for your production. Atlas Copco supplies the highest quality of air and nitrogen with boosters certified to Class 0 according to ISO 8573-1.

Router with table widening Speed: 10,000 – 20,000 rpm. Table dimensions: 900 mm x 765 mm4. Engine 3 kW5. 380 V Dimensions: 900 mm x 1400 mm x 1600 mm Weight approx. 575 kg

spindle tilting: + 45,5° bis -45,5° ; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: electrically ; altitude display: digital; swivel angel display: digital; fence display: digital; spindle: MK 5; speeds: stepless 900 †12000min¯¹; power consuption: 7,5 kw; motor brake: yes, automatically; suction connection: 3 x 100 mm, 1 x 120 mm; machine length: 2540 mm; machine width: 1195 mm; weight: 950 kg; Highly stable steel gray cast iron construction Large work table made of gray cast iron Electric spindle drive 7.5 kW with maintenance-free direct drive guarantees maximum precision through maximum smoothness Maximum power is already available from 3400 min¹ Precision aggregates and high own weight Rapid table insert, infinitely manually adjustable to tool diameter (optionally electronically positionable) Standard with righ ...

Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute

spindle tilting: Nein; height adjustment: Handrad; tilting adjustment: -; fence adjustment: manuell; read out height adjustment: Scala; fence indicator: Scala; spindle diameter: 30 mm; speed: 3000, 4000, 5000, 6000, 8000, 10000; motorpower: 6 / 8 kW; motorbrake: Ja, automatisch; suction connection: 2 x 120mm; machine length: 1200mm; machine width: 900mm; weight: 800kg;

Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Feeding speed: 1800 kg, Year :1981

Vacuum Feeding System Stuer With lift table Lödige Infeed mechanization for planer or other equipment Vacuum Feeding System Stuer With 12 vacuum cups Vacuum cups adjustable on rails Maximum width 250 mm, length 1600 mm Suction cup diameter approx. 50 mm Dimensions 3300 mm x 2500 mm x height 3500 mm Lift table Lödige Load capacity 3000 to. Platform size 2250 mm x 1200 mm With 2 side ejectors for transport into a planer The system was used to feed a four-sided planer.

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)

Frezarka górnowrzecionowa Samco ROUTER Spindle distance from arm 800 mm Spindle driving motor 3/2.2 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-045 degree Height-adjustable table Spindle control pneumatically from the pedal Worktop size 800×600 mm

Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation - Socket for  ...

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Combined Saw / Milling Machine / Slotted Hole Drilling Machine Make Hombak With 3 rollers of feed wood Table milling machine with 30 and 40 mm spindle Swivel saw table Saw table with width stop Motor power approx. 3 kW

Code: 0223 Brand: SICAR Model: SFL 1000/M - CE Standard Spindle moulder with long tables for milling of wood, plastics, composites and various materials - CE Standard Technical data: Working table size mm 800 x 2500 Working table height from ground mm 910 Spindle diameter mm 35 Useful spindle height mm 200 Rotation speed rpm 3500/6500/8000/10000 Motor power Hp 5,5 Adjustable fence with read-out Electric spindle lifting with mechanical display Rotation reversal Overall dimensions mm 2500 x 1150 x 910 h Weight kg 650

Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25           Working hours: 47.000 only            Machine was regularily maintained       Machine equipped with:                     Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request

Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000                   Number of moulds: 18       Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control

Robust swivel milling machine 245 medio from Panhans - Hokubema swivels from 45 to +45 degrees in very good equipment and rolling table Ideal machine for window manufacturers due to roller table Positioning control in 2 axes for spindle height and spindle inclination Reinforced drive motor 7.5kW with automatic motor brake and stepless speed control from 1500 to 10,000 rpm R/L barrel Swivel angle from -45 to +45 degrees, electrically adjustable Height adjustment electrically adjustable HSK-80 Rapid shaft change spindle with 30mm diameter, change to other diameters is possible quickly Comfort stop with digital display of the total adjustment, adjustment by hand crank Stop with comfort lifting device hydraulically swivel away (for bow milling work, etc.) Zeromaster Reference Device for Milling Height Adjustment Table extension on the right with extendable workpiece support Tab ...

Year of manufacture: 2004 Planner: High-speed Moulder/Planer Waco Maxi Working height: 14 - 150 mm Working width: 30 - 300 mm Complete moulder line with High-speed Moulder/Planer Waco Maxi and mechanization from Almab Planer/Moulder: - High-speed Planer/Moulder: Waco Maxi - Year of manufacture: 2004 - Feed speed: 30 - 350 m/min - Spindles: 7 Technical description: - Working width: 30 - 300 mm - Working height: 14 - 150 mm - Cutting circle: 180 - 260 mm - Combination: bottom/top/left/right/top/bottom/bottom - PLC system: Siemens - Weight: 16 500 kg

spindle tilting: Ja -5 bis 45°; height adjustment: elektrisch; tilting adjustment: elektrisch; fence adjustment: manuell; read out spindle height: -; read out tilting: Scala; read out fence: Scala; spindle diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg;

Router model OF 950 year 90

Key data: 1000 mm, 4 kW, 35 mm

SPECIFICATIONS: Workbench mm: 1000 x 1000 with 4-roller Europa drive with variator Installed capacity KW: 4.0 Diameter of spindle mm: 35 Tilting spindle shaft Max. vertical stroke mm: 210 Tilt: 0° - 45°

Overview The blowing machine TMS 2001 G was manufactured in 2001 by Spanish manufacturer SIDE. It processes with a capacity of 1,000 bph at 5l. The machine is stored because the former user has changed to a new one. It is located in Spain and has already been disassembled and available immediately. Tech Specs Capacity: 1,000 bph at 5000 ml    Additional Equipment No blow molds included CP: Siemens simatic MP270

Steel mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould has appropriate fittings and pressure plates and must be rebuilt accordingly for each step length. Step height 18cm, tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.

Griggio TC200 spindle moulder with carriage Spindle diameter 35mm Spindle total height 190mm Longitudinal carriage in the worktop Carriage length 1100mm Left and right spindle rotations Spindle speed variable on belts Spindle RPM: 3000/4500/6000/8000/1000 4kw main motor Manual spindle lifting with crank Extraction pipes 2x120mm Dimensions of the machine 120x90x125cmH 500kg

Spindle moulder Griggio T220 Spindle diameter 35mm Spindle total height 150mm Spindle speed variable on belts Spindle RPM: 3000/4500/6000/8000/1000 5.5kw main motor Manual spindle lifting with crank Four-roller feed Europa 440 Extraction pipes 2x120mm Dimensions of the machine 120x90x125cmH 500kg

SECOND- HAND SPINDLE MOULDER SCM MOD. T130NPS - CE RULES - with inverter - sn AB/155496 - year 2003

Spindle moulder Casolin F45L Spindle diameter 40mm Spindle total height 220mm Electric spindle height adjustment Electric spindle tilt angle adjustment +45/-10 Spindle speed adjustable 3000/4500/6000/8000/10000r.p.m 5.5kw main motor Aigner fences Extraction pipes 2x120mm Dimensions of the machine 265x130x180cmH Weight 980kg CE Certified

SECOND-HAND SPINDLE MOULDER WITH TILTING SHAFT SCM MOD. TI120 - CE RULES - tenonig carriage model TL - spindle shaft diam. 40 mm. - motor Hp 7,5 - year 2008

SECOND-HAND SPINDLE MOULDER SCM MOD. T150 - CE RULES - volt. 400/50 - matr. AB/142970 - year 2001

SECOND-HAND 4 SPINDLES FOUR SIDE MOULDER SCM MOD. SINTEX XL – CE RULES Spindle configuration: bottom right left top - working width mm 180 - working height mm 120 - year 2001

SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998

Code: 0207 Brand: SELECTA Model: T 12 - CE Standard Spindle moulder - Year 2005 - CE Standard Worktable dimensions mm 1200 x 750 Working table height mm 850 Shaft diameter mm 35 Motor Hp 5,5 N° 4 speeds rpm 3000/6000/8000/10000 Shaft locking pedal Brake pedal Aluminium guides Suction mouth diameter mm 150 Overall dimensions mm 1350 x 800 x 1100 h Weight kg 850

Overview The Krones Contiform 3 stretch blow moulder was manufactured in 2015 and installed in a mineral water company in Germany to replace an older contiform. As most other machines of this line are already older, the owner decided to stop production. Due to this, the machine has less than 3900 operating hours and is in excellent condition. With the machine, there are two sets of blow moulds (nine moulds in each set) The documentation and program backup are also available. In addition to the blow moulder, there is the preform kipper, hopper, alimentation and sorting. Tech Specs: Capacity: up to 18,000 bph Number of blowing stations: 8 Max. container volume: 3,0l Operating hours: < 3900 h Integrated power recovery Additional Equipment: Blow moulds for 0,5l; 1,0l  Preform feeding system Technical documentation Air conveyor