weinig machine used for sale

Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

workpiece length: 610 mm work piece width: 180 mm workpiece height: 240 mm dia. of cup wheel: 200 mm table-size: Ø 280 mm spindle throat: 250 mm spindle speed:: 3000 U/min. voltage: 380 V total power requirement: 2,94 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 0,85 x 0,75 x 1,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread packaging machine Hartmann VS 310 Series: M86/ 211L Year of construction: 12/1993 Weight: 850kg

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

brand: CKD BLANSKO Model: SKHK 50 plateau diameter: 4770 mm maximum diameter: 5200 mm ram stroke: 2000 mm maximum height: 3000 mm capacity: 50 ton. Plateau revolutions: 1 range: 0.4-12/ 2 range: 1.6-50

With matching spacer rings according to photos. Scope of delivery according to photo 1.

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Used flow pack packaging machine. Manufacturer Chemosvit Strojchem, model BH-07W. New 2017. Capacity 15-250 pcs/min. Available 3 pcs. (2 used and 1 almost unused)

Fogg & Young Bale Cutter

Total lenght 2800mm

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.

Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Folding machine Shoei Model Mach Eight Year 1995 Serial 7092 Size Min: 150 x 210 mm / Max: 470 x 640 mm Feeder suction wheel + stream feeder Folding configuration 2 plate buckles + 1 knife Delivery detachable belt delivery Details Vacuum pump, noise hood, electronic speed control, sheets separations head Condition Rollers, belts, vacuum roller are all good Available direct

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

Lathe Mantegazza 315

Lathe Mantegazza 410

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max 165 mm -Weight: 35 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 280 mm -Dimensions: 600/250/H140 mm -Weight: 50 kg

roll diameter: 76-86 mm Shaft diameter: 20 mm Shaft revolutions: 11 U/min Bending capacity round tube: 30 mm : 25x6 mm Angle iron: 20x20x4 mm Drive: 0,18 kW range L-W-H: 530x420x500 mm weight: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 110 mm -Dimensions: 470/180/H155 mm -Weight: 35 kg

Machine vice, sturdy vice, drill press vice -Jaws can be moved depending on the workpiece geometry -Vise: rotatable -Jaw width: 255 mm -Clamping depth: max. 300 mm -Dimensions: 680/330/H180 mm -Weight: 95 kg