weinig machine used for sale

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

Sewingmachine Make Müller Martini Model FK-I1-S Year 1960 Min. size 40 x 60 Max size 250 x 440 mm Stitches 1-8 Details Independend thread tensioning, cutting function

Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

Package strapping machine with frame size 1600 x 400 mm, width 12 mm. Very little used, because bad buy. Location Netherlands, Sold on order.

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

Equipped with ground cable, extension cable and welding pliers

Speed: 810 rpm Voltage: 230V Frequency: 50Hz Power: 1600W Maximum diameter: 35 mm Maximum Attraction: 16000 N

We sell here a can sealing machine from the manufacturer Lanico, type V 10 A in a good used and functional condition. The machine runs on 400 volts, 0.55 kW, for 70 and 99 cans, workshop tested, immediately ready for use, dimensions W/D/H 50/50/157 cm, others on request.

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;

2x 4.0 amp/h batteries brushless

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Variovac; Model: 4000 VA; Year of production 1997; Working with soft or hard foil; Bottom foil: +/- 560 mm (approx); Upper foil: +/- 550 mm (approx); Molding length: 420mm; Forming width: 503 mm; Molding depth: 70mm; Formats: 3.2; Length: 8600 mm; Width: 1200 mm; Height: 2000 mm; Weight: 2500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packaging can be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: TX 12/121; Year of production 1991; Working with soft foil; Bottom foil: +/- 415 mm (approx); Upper foil: +/- 405 mm (approx); Molding length: 395mm; Forming width: 368mm; Molding depth: 90mm; Formats: 1.2; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg - the machine is dismantled; - technical condition - good; - yes, there is original documentation, CE certificate, CE nameplate and a general list of inputs and outputs.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: CFS; Model: TIROMAT Compact 420; Year of production 2001; Working with soft foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 430mm; Forming width: 380mm; Molding depth: 130 mm; Formats: 2.2; Length: 6700 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg

x-travel: 4300 mm y-travel: 1000 mm z-travel: 1050 mm total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: m Brand: ANAYAK Type: HVM-5000 Build in : 1997 CNC Control HEIDEHAIN, TNC 426 Tablesize: 5000 x 1000 mm X= 4.300 mm Y= 1.200 mm Z= 1.050 mm Toolchanger for 40 tools Tools: BT 50 CNC Controlled head 2,5 degrees Cooling trough the spindle Number of controlles axes: 4 machineweight 35.000 kg Moveable column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: FREEDOM / F140; Year of production 2004; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 256mm; Forming width: 386mm; Molding depth: 120mm; Formats: 2.2, 3.2; Length: 7500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Philips Diagnost TH with the following system components Generator Optimus 50 Tube RO 1750 0.6/1.2 (ceiling hanging) Vertical tripod Diagnost VE/VT • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and equipped with Stretch film wrapped and can be picked up immediately • You buy the system in "as-is" condition ex warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation, commissioning and configuration of the plant or parts of the plant must be carried out by the manufacturer or by a by the manufacturer authorized specialist or technician!

It is a used, reconditioned Rego stirring and beating machine SM 3 (32 liters) for sale. The speed of the machine is infinitely adjustable. With automatic timing of the timer, bowl height adjustment by crank revolution. Electrical conversion from beating to stirring, real deflection by stationary shaft. The machine has a new stirring head, has been completely re-stored and painted. Very good condition, runs very quiet. Incl. bowl, tirring tool and beating tool. Flat stirrer and dough hook made of stainless steel for an extra charge. Dimensions: width: 60cm, depth: 70cm, height: 160cm, weight: 290kg, 400 volts Price on request.

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz  

This SCHÜBEL MT 630 CNC was manufactured in 1999. It is a horizontal turning machine featuring a point width of 2,000 mm, a circulation diameter of 630 mm over the bed, and 290 mm over the cross slide. The speed range is 8 - 3,000 rpm with a drive power of 28 kW. Contact us for more information about this machine.

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

Liebherr Betomix 2.0 Z, capacity 90 cbm/h, mixer type Liebherr RIM 2.0 with ceramic tiles and rotor was overhauled in 2022, SPS RIEGER DIDO WIN, Mesomatic displays installed in a container, storage tower 240 t capacity with 6 boxes, 2 x 80 t cement silo, 1 x 100 t cement silo, 1 x 100 t double chamber silo, elevator with feed hopper, Hot air heating and hot water preparation KROLL, etc

This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details.

This 6-axis DMG Mori Seiki NZ2000T3Y2 was manufactured in 2008. It features a maximum machining diameter of 200 mm and a maximum machining length of 260 mm. The bar machining capacity is 65 mm, with an X-axis travel of 210 mm, Z-axis travel of 810 mm, and Y-axis travel of 110 mm. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki NZ2000T3Y2 machine we have for sale. Contact us for further details.

Maschine zur Belüftung von Sahne. Effizient, in sehr gutem Zustand. Bei Interesse nehmen Sie bitte Kontakt mit mir auf.

Brotschneidemaschine verwendet. Sehr guter Zustand.

Balestrini linear milling machine two milling units pneumatic pressure of elements

This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 2013. This EHRT Holecut 40-9 features an automatic infeeding system for materials up to 4.2 m long and gripper jaws accommodating material thickness from 3 to 15 mm. It supports up to 9 tools in storage and has a punching rate of 70 SPM. If you are looking to get high-quality punching capabilities, consider the EHRT Holecut 40-9 machine we have for sale. Contact us for further details.

Deburring machine manufactured in 2007. This Fladder AUT-1000 VAC features a voltage of 3 x 400V and operates at a frequency of 50 Hz with a current of 50 A. If you are looking to get high-quality deburring capabilities, consider the Fladder AUT-1000 VAC machine we have for sale. Contact us for further details.

CNC shearing machine manufactured in 2010. This LVD MVS-TS 13/31 features a maximum cutting length of 3100 mm and a cutting thickness of 13 mm. It is equipped with a backgauge range of 1000 mm and a powerful motor with 21.5 kW. If you are looking to get high-quality shearing capabilities, consider the LVD MVS-TS 13/31 machine we have for sale. Contact us for further details.

1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!

Make : Trepko Filling Machine Cup Type : Split Cup Filling : Cereals and Yoghurt Condition : Good Pick and Place device for cup in Trays

Lapping machine manufactured in 1983. This MYLÄP 400 features a lapping plate diameter of 400 mm, suitable for precision lapping applications. If you are looking to get high-quality lapping capabilities, consider the MYLÄP 400 machine we have for sale. Contact us for further details.

Lapping machine manufactured in 1990. This MYLAP 700 features a power of 7.5 kW and operates at a voltage of 380 V. If you are looking to get high-quality lapping capabilities, consider the MYLAP 700 machine we have for sale. Contact us for further details.