132,115 used machines on RESALE, but how to find them? Machine Search
ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools
technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...
Döinghaus mobile portioning machine, type: USQ Micra, serial number: 604.06, year of construction: 02.2019, 230/400 V, 3 Ph, 50 Hz, 4 A, 3.2 kW, plastic belt, belt width: 200 mm, knife length: 160 mm, total dimensions: 2500 mm x 610 mm x 1650 mm.
Diosna spiral kneader SPV 160 AD with 2 extendable boilers For a maximum of 160 kg of dough per bowl Kneading tool made of stainless steel Including two stainless steel shells Timer with two clocks Two speeds Friction wheel drive Condition: obsolete; checked and cleaned
Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing
Stephan micro cutter, type: MCH-D90, machine number: 724.127.01, year of construction: 1999, 400 V, 50 Hz, 128 A, 75 kW, dimensions: 2150 mm x 900 mm x 1250 mm.
Machine type: CNC Vertical Machining Center Manufacturer / Brand: MÜGA Werkzeugmaschinen GmbH Model / Type: R6040 Year of manufacture: 2011 Serial number: ACMM6 004 Control unit: Mitsubishi M70 CNC Country of manufacture: Germany Worktable: Table size: 700 x 410 mm Max. table load: 250 kg Travel ranges: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle: Spindle taper: ISO 40 Spindle speed: up to 12,000 rpm Spindle type: Direct drive Tool system: Tool magazine capacity: 12 positions Max. tool diameter: 80 mm Max. tool length: 250 mm Feeds: Rapid traverse: up to 28 m/min Measuring systems: Renishaw tool measurement: yes Renishaw workpiece measurement: yes Electrical data: Voltage: 400 V Frequency: 50 Hz Connected load: approx. 19 kW Dimensions and weight: Overall dimensions (L ...
It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.
Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm Cutting in a water bath Conicity: +/- 15° at 120mm
Spiral kneader with vat trolley Diosna SP 240 AD Incl. 3 vat trolleys 2 speed, traditional control Power in dough: 200 kg Vat diameter: 900 mm Friction wheel drive Pliers locking
KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available
A universal tool milling machine is offered. Travel ranges X/Y/Z: 500mm/200mm/380mm, speed range: 40-2000rpm, feed: 8-400mm/min, tool holder: SK 40, vertical spindle offset 0.05mm to the left relative to the horizontal spindle, Heidenhain 3-axis DRO. Inspection possible by arrangement.
A CNC crankshaft milling machine Heller without chuck is available. Milling speed: 300m/min, workpiece length: 800mm, max. workpiece diameter: 700mm, pin diameter range: 35mm-80mm, clamping diameter: 180mm, travel path W/U/X/Z: 625mm/180mm/180mm/660mm, rotation range X: 360°, control system: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible.
A roller straightening machine is offered for sale, straightening system: multi-roll system, adjustment: manual, integrated dial gauges, infeed table with roller guide, inspection possible by arrangement.
Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!
A precision roller straightening machine is offered. Working width: approx. 120mm, processing size: approx. 0.2-1.5mm, incl. control panel and digital displays, machine weight: approx. 450-600kg. Inspection possible by arrangement.
A roller straightening machine is offered. Working width: approx. 100-120mm, max. material thickness: approx. 0.1-1.0mm, multi-roll system, 4 integrated ARKU precision dial gauges, inspection is possible by arrangement.
Hand sealing machine for sample packaging blister Sealing jaws can be triggered with pneumatic foot switch. Temperature and sealing pressure adjustable. Sealing of one side at a time, max. 150mm width, sealing pattern see picture.
Milling machine MACMOM M 100, year of construction 1970. Without table. At call.
A precision roller straightening machine is offered. 18 straightening rollers, working width: approx. 120mm, processing size: approx. 0.2-2.0mm, machine weight: approx. 450-550kg. Inspection possible by arrangement.
Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible.
Used master can filling machine 23000 CPHTechnical Specifications & Performance DataThis rotary can filling machine is engineered for carbonated soft drink applications and high-speed beverage production. With a robust rotary carousel and precise isobaric filling technology, it supports multiple aluminum can formats while maintaining excellent product integrity and carbonation retention. Manufactured by Tecno-Food Group, the Master Can configuration delivers reliable output for second hand and used bottling line projects in industrial packaging.Filling technology: Isobaric for carbonated beveragesNo. of valves: 50Series: 50Carousel pitch: 113 mmCarousel diameter: 1800 mmRotation: CounterclockwiseBase format speed: 23,000 can/h (0.5L)Maximum speed: 28,000 can/h (0.33L)Compatible formats: 0.33L, 0.5L cansFilling temperature: 18 °CCO2 content specification: 8Installed power: 20 kWMain po ...
Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.
Used Capsuling Machine GAI 4264D The GAI 4264D is a reliable, second hand capsuling solution engineered for precise application of capsules on glass bottles in demanding beverage production environments. Operating at up to 3000 bottles per hour with 4 dedicated heads, this model is well suited for wineries, breweries, distilleries, and diversified industrial packaging lines seeking to enhance presentation and product security. With format compatibility from 0.06 L miniatures to standard 0.75 L bottles, it integrates seamlessly into a used bottling line alongside rinsing, filling, capping, and labeling equipment. Technical Specifications & Performance Data Optimized for continuous operation, the GAI 4264D offers stable output and repeatable capsule placement for premium appearance and brand consistency. Manufacturer: GAI Model: 4264D Year of manufacture: 1996 Category: Capsuling machine O ...
Viewing by appointment. Auction-ID: A1-40256-91
We sell here a vibrator / portioner from the manufacturer ISO-FLO, type MVIFD in a very good used and functional condition. The machine is built in 2004, runs on 400 volts, completely stainless steel, filling surface W / D / H 60 / 140 / 20 cm, workshop tested, immediately ready for use, dimensions W / D / H 200/90/75 cm, more on request.
Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional
Storage capacity 5 liters. Auction-ID: A1-40256-118
Auction-ID: A3-43534-16558
Paper drilling machine Hang 114-30-4; good condition; cleaned and tested; 4 drill heads; drill lubrication; drilling cooling; speed regulation; Table lifting speed adjustable; Drilling distance 36-260mm; Insertion depth 6-130mm; Insert height max.65mm; endless drilling tape; Table size 600x480mm; new table; new hood; new belts. Paper drilling machine 114-30-4; good condition; cleaned and checked; four heads; drill cooling; lubricating device; variable drill speed; table lift speed adjustable; adjustable drill offset 36-260mm; insertion depth 6-130mm; stack height 65mm; cardboard band under drill; table size 600x480mm; new table; new cover; new belts.
SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels
SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)
Machine Details Stock number 1105-03771 Machine type CNC lathe Brand MORI SEIKI Type SL 25 B/500 Year of construction 1992 Control type CNC Control mori Fanuc MF T6 T6 fanuc mori Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 260 mm Turning length 625 mm Control mori Fanuc MF T6 T6 fanuc mori Circumferential diameter over bed 520 mm Orbital diameter via slide 350 mm Turning length 530 mm Travel - x 160 mm Travel - z 590 mm Speed 35-3500 rpm Spindle nose A2-6 Spindle bore 80 mm Bearing diameter 130 mm Turret head 10 pos. VDI Tool change time 0.7 sec Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Quill diameter 110 mm Quill stroke 100 mm Tailstock displacement 491 mm Drive power - spindle motor 15/11 kW Total power requirement 40 kW Machine weight ca. 5 t ...
Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...
CO2 2d laser Model MAZAK NTX48 Champion Year 1999 Hours worked 53052 Power 1500 watts Hybrid type axis movement (X axis table movement, Y and Z axis head movement) X-axis longitudinal travel 2650 mm Y-axis transverse travel 1270mm Z-axis travel 100mm Machinable dimensions 2500x1250mm Head with capacitive sensor Mazatrol L-32B CNC Control Maximum machinable thicknesses with 5-inch head now supplied --6.0mm iron -3.0mm stainless steel -2.5 mm aluminum (with 7.5 inch head Iron 12.0mm Stainless 6.0mm theoretical) External dimensions: Length 5563mm
Kneader Kemper F125 SL Kneading Machine Menger -Lifting kneader with fixed boiler -for max. 200 kg dough or .max 125 kg flour -with 2 speeds -Stainless steel boiler and lifting arm -with flour dust cover -Boiler diameter inside 90cm -Boiler height inside approx. 50cm -can be used on wheels with 2 locks
Dear customers currently we offer you a refurbished columns or column drilling machine from F. Zimmermann for sale. The special feature of the machine is the work table adjustable in 3 levels. Here are the other technical data of the machine: Speeds: 100 - 2,250 rpm Work light MK3 recording (new) Swivel radial: 360° Swivel axisial: 2x 90° Quill stroke: 160 mm Projection column spindle center: 500mm Table: 490 x 400 mm Centering disc Ø: 55 mm H7 working height swivel table: 715 mm working height base plate: 1,215 mm Base plate and table with T-slot 12 mm Dimensions: 600 x 1,120 x 1,930 mm Power: 1.5 kW Weight: approx. 500 kg After the overhaul, the machine has a completely new electrical system including engine brake, is painted light grey in RAL 7035 and comes with a drill set. We look forward to your questions and inquiries! If you have any questions, please ...
Counter: number sets: 2092702 // sheets: 2102565 // stapling: 1807398 // folds: 2022952 // cuts: 1763900 Equipment: 2xTOWER BST10 / BST 10 (each 10 stations) M.No.: 02 01 4 1834 M.No.: 02 11 4 1769 BDF M.No.: 40 12 4 1046 Two spare wire stitching heads included
Deckel Maho DMF 300 Linear, built in 2002 TECHNICAL INFO: CONTROLS: CNC SIEMENS Sinumerik 840 D power line, TRAVELS: X: 3,000 mm Y: 560 mm Z: 720 mm Spindle mount SK40 Spindle speed: max 12,000 rpm (limited to 6,000 by gearbox) Tool magazine for 40 tools Operating hours: 21,865 Spindle hours: only 9,320 Very reliable, stable and good machine! No maintenance backlog! - In recent years, small items such as belt pulleys, hydraulic accumulators, scrapers, linkages have been added, regardless of the maintenance positions - In 2018 a new Z-axis ball screw came in. The engine gearbox was also overhauled - Rotary table 560mm (4th axis) for assembly also available and part of the sale The orientation of the Hirth toothing when swiveling would have to be readjusted. However, we only use the machine as ...
Dear customers currently we offer you a used disc or disc grinding machine for model and mold making of the brand HoPa. Here are the technical data of an S 650 machine: Disc diameter: 600mm Table length: 950 mm Table width: 470 mm Table working height: 900 mm Table swivel: 30/45° Schraegan stop: 60/60° Power: 2.2 kW Speed: 1,000 rpm Right-left rotation Emergency stop with engine brake Dimensions: 110 x 85 x 140 cm Weight: 315 kg Documentation incl. CE and declaration of conformity available! Accessories such as inclined stops, adhesives and grinding wheels included. We look forward to your questions and inquiries!
Thicknesser SCM S520 Working width 520mm Working height 250mm Feed speed adjustable: 4 degrees Shaft with traditional knives 4-knife shaft Power 4kw Weight: 670kg
ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60
maximum number of results exceeded
please refine your search
2.500 € 
