weinig el used for sale

We supply service and spare parts for seam and machining centers of the manufacturers Elumatec, Rapid, URBAN, Josting, MAW Nottmeyer and Actual. In particular, electronic components of the following machine types are constantly available. Machining centers / saegen: SLK 118, SBZ 122, SBZ 130, SBZ 131, SBZ 140, SBZ 150, DG 142, DG 204, DG 244, DGL 200, DGL 220, DGL 250, DGL 260, DGL 300 Welding machines URBAN, ACTUAL: AKS 6100, AKS 6105, AKS 6110, AKS 6600, AKS 6605, AKS 6610, AKS 6900, AKS 6910, AKS 6250 Plastering machines URBAN: SV 410, SV 410-B, SV 420, SV 430, SV 430-C, SV 530, SV 530-B, SV 530-C, SV 800, SV 815, SV 820, SV 840 Fluegel fitting machines FBA 2500, FBA 2502, FBA 2504 A machine-specific parameterization of the respective components is possible (software, firmware). We keep the following components constantly available: ferrocontrol IPC E500, E550, ...

Driven conveyor belt – carpet conveyor Gebhardt LxWxH: approx. 2.800x930x830mm Carpet width: approx. 800mm Height adjustable, on castors Angetr. Roller coaster with centering unit Kraus LxWxH roller passage incl. centering unit: approx. 1.910x1.1.420x1.480mm Wide roller coaster: approx. 670mm Roller gear: approx. 600mm Working height: approx. 880mm (height adjustable) 4 pcs. roller coaster straight, 1 pc curve element 90° not driven – Kraus Straight Elements (LxW): 2.000x670mm Roller gear: 600mm Roller distance approx. 25mm height adjustable 2 pcs. Angetr. Carpet conveyor, Kraus Width: 600mm Carpet width: 500mm Lengths: 11,000 and 12,000mm On castors Visit on site at the customer's site is possible by telephone agreement.

well preserved electric motor Technical data Power 380 volts around 13 KW Maps about 1150 RPM Weight approx. 105 kg

Power Plant 19 MW Titan 130 + boiler + steam turbine 16.000 hours since new in 2005 in excellent condition, as new. For immediate sale.

POWER ELECTRONICS ASSY - CONTROL BOARD FOR FILLING MACHINE VEMAG TYPE 134 ROBBY II - / PC 880 / ARTICLE NUMBER VEMAG: 871.371-004 871.380-002-574733-5LP210695 871.360-102 - 871.360-002 072.999-005 875.821-005 - 871.821-105 871.370-004 - 871.370-701 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Type HLP Voltage 220 V Power 400 W Length 120 mm Diameter 8 mm Made in Germany Weight 70 g

Length 1155mm Thread diameter 47 mm Power 1500 W Voltage 230 V Transport dimensions 1220x70x70 mm Weight 0,8 kg

New lift elevator motor because a insolvency to a special price - Manufacturer: LOGOS Innovationen GmbH - Type LDS-320 - Asynchronous motor 15KW Manufacturer EMOD - Belt drive 4 belts - Speed 1m / s - Suspension 2: 1 - Payload 1250 Kg - 2 magnetic brakes from Mayr 2x550Nm braking force - including test protocol

E-motor, 220 kW, 745 RPM

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen

Stainless steel electric stove 1 plate, is located in a very good, clean and functional condition. -Manufacturer: Bartscher GmbH -Model: FO/E 31 Technical data: -SER. No.: FO/S 31-105.343 Plate diameter: 300mm -External dimensions: 500 x 500 x 500 -elek. Voltage: 400V -Frequency: 50 Hz -elek. Performance: 3.5kW

Slanted elevator with Rätzmühle RM4 Technical data: Nominal output up to 3 000 kg/h Power: Slanted elevator 0.55 kW Mill 4/3.3 kW Circumcate pump 2.2 kW Electric connection 400V 50Hz (3 phases) Electrical protection 32 A Dimensions: Length 3 540 mm Width 935 mm Height 2 585 mm Discard or drop-in height 850 mm Weight 350 kg Material 1,4301/AISI 304 Connections: Connection for cleaning 1/2 "inside Connection for washing containers 2 "outside Height corn chee-ejection 1 570 mm Can be used for nuclear and stone fruits, berries, vegetables Delivery 7 mm, 9 mm and 12 mm cutting sieve

Electric corner round thruster Gämmerler 105 M; good condition; Knife 52mm; Max. Insertion height 80mm; Table enlargement to 80x60cm; can be removed; optional knife 3mm available. Corner rounding machine Gämmerler 105 M; good condition; knife 52mm; max pile hight 80mm; bigger table with size 80x60cm; can also be used without the bigger table; for option is knife with 3mm.

plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.700 mm infeed height : ± 800 mm total dimensions : ± 6.800 x 1.000 x 2.700 mm adjustable speed mobile 1 kW

Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Amperage range maximum: 0 A Amperage range minimum: 0 A aligning for sections of a growing line ideal for wind tower, vessel, pipemills with rail bogie driven Load capacity per section:30 + 30 T Vessel range Minimum:    1500Ø Vessel range Maximum:    6500Ø No of wheels per section:4 Number of matching pieces:2 Length:                  4.500 mm  Width:                   2.200 mm  Height:                  1.000 mm  Weight:                  2885 + 3885 kg 

Manufacturer: AEG Type: AM 225MC404 52.0 kw

Manufacturer: Siemens Type: 1LA6 186-4AA71 22.0 kw

Manufacturer: AEG Type: AM 180 LC4 22.0 kw

Manufacturer: ATB Type: 3543598 7.5 kw

Approx. 50 pieces of press moulds for round elements Dimensions: 1000 mm x 1200 mm

TECHNICAL DATA: Handling System Linear Meters: about 135,38 Working width mm: 600 - linear meter 16,5 Working width mm: 650 - linear meter 29 Working width mm: 670 - linear meter 16 Working width mm: 700 - linear meter 58,4 Working width mm:1030 - linear meter 3,48 Electrical Panels: 03

<b>Features:</b> Used pallet roller conveyor Condition: Top condition with slight traces of use Material: steel (galvanized) Color: galvanized Professionally dismantled and packaged 10 pieces in stock Price per meter <b>Technical data</b> Manufacturer: Euroroll Condition: Used Colour: galvanised Total length: 2.520mm Removal length: 1,300mm Roller track length: 1.220mm Frame: steel/galvanized Height: 80mm Width: 40mm Incl. 2 brake rollers Diameter: 80mm Pallet namhe and feed element by forklift <b>Pallet roller conveyor</b> Thanks to the excellent workmanship of the pallet roller web, your material glides gently to its destination, even under high loads. <b>Tailor-made logistics for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors o ...

1 aseptically filling Elo-Pak line suitable for ESL milk and fruit juice Int. Designation: new hall composed of: a.) 1 aseptically filling Elo-Pak filling machine Int. No. II 103 built by Fa: Shikoku Type: U-980 A Serial No. 455 Year of construction 2007 with 3 format options, 0.33, 0.5 and 1.0 l Output: 11,000 U/h for fruit juice in use in operation until the end of January 2019. The following annexes to the Elopak line are: 3 rows of individual packaging transport lanes from polycetting, length to Meuerer carton packing system approx. 23 m with curves 3 Elopak ceiling stackers Year of construction 2004; with screw cap magazine with Yet stream transport railways into the 3 lid storage containers 1 carton pack vending machine for 6 units in the box, partially open at the top Type: Ba-6-30; Serial No. 50325-210 Manufacturer: Meurer Year of construc ...

unicraft Generator PG 800 TRA Product Name: Synchronous Generator Type: PG 800 TRA Manufacturer: unicraft Item number: 6701083 Year of construction: 2021 Condition: New technical details drive: - Drive motor: Honda GX390 - Starter: Hand start (wire rope hoist) - Fuel type: Petrol - Tank capacity: 11 liters - Consumption at 75% load: 2.2 l/h - Sound pressure level (Lp): 72 dB(A) - Sound power level (Lw): 97 dB(A) technical details power generators: - Type: nsm-ZR100-SC Synchronous - Rated voltage: 230 / 400 V - Apparent power at LTP: 5500 / 8300 VA - Active power at LTP: 4.9 / 6.6 kW - Apparent power at COP: 4100 / 7000 VA - Active power at COP: 3.7 / 5.6 kW - Protection class of the generator: IP 23 - Sockets: 1 x 230 V Schuko, 16 A / 1 x 400 V, 16 A - Protection class of the sockets: IP 44 - short-term power up to 3 times the rated power possible (LTP = ...

Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price ! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase ...

Properties: Used roller conveyor folding element from the manufacturer Interroll Condition: fully functional with traces of use Professionally dismantled and packaged Price per pc. Technical data: Dimensions of the flap Total length: 1,300mm Total width incl. feet approx.: 890mm Conveyor width: 660mm Min. height Top edge roll: 700mm Axis distance: 75mm Roll diameter: 50mm Incl. 24V- Motor In stock: 12 pieces Price per piece Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network o ...

properties: Used roller conveyor folding element Condition: fully functional with traces of usage Expertly dismantled and packaged Price per pc. Technical data: Dimensions of the flap Total length: 1.180mm Total width incl. feet approx.: 670mm Conveyor width: 460mm Min. height top edge roll: 570mm Axle spacing: 75mm Roll diameter: 50mm In stock: 3 pieces Price per piece Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for compani ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

Key data: 6400 , 8000 , 11000

12.8 MW WARTSILA HFO fired power plant 18V32LN x 2, 6.52 MW / 11 KV / 60 Hz , Year 1998, Running hours : 27000 , may convert to 50 Hz if required

Two three-phase motors 380-415 V - 50 Hz 0.9 KW - 2820 RPM Protection class IP 20 Never been in use

Electrode furnace, electric 220 V

Manufacturer: Kemppi (Finland) Power: 5 - 300 Amp semi-automatic electrode welding machine Welding pliers new! (length approx. 4.70 m) Ground cable new! (length approx. 3.70 m) Connection cable 5 pole new! (length approx. 2.90 m) Note: There are 3 equivalent devices in stock! The price refers to the unit price! (Changes and errors in the technical data and prices reserved!)

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 ...

Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm

- max welding current: 200 A - max welding voltage: 27 V - Total power: 10.6 kW - Machine weight: 88 kg - Weight wire feed unit: 17 kg - Space requirement (W x D x H): 376 x 684 x 381 mm Details with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version is manual power source

Elbow 45° AGRU 250 SDR 17

Description: -Powerful, fully hydraulic wood saw with electric motor -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch and a hydraulic feed table 180cm with an electromagnetic switch Technical specifications: Motor: 7.5kW, 50Hz, 380V, 3-phase Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 4800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 4 inches Duty cycle time: 8 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.

MEILLER TIGER LIFT Electric lifter 1000kg All data on photo. Machine was almost unused. New two batteriess and integrated charger.

Pole-changing electric motor for cooling tower, DKF 160LI 1008/16, Kräutler, new -50% Special price (The current new price in the market is € 3.243 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Special motor for driving large fans in the cooling tower - pole-changing three-phase asynchronous motor with 2 speeds - For cooling, the motor must be located in the external air flow - 400 V - 725 / 350 rpm - 7.5 / 1.7 KW - approx. 100 kg - shaft diameter 42 mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work wi ...

Electron microscope Brand: Jeol Microprobe Type JXA-8900RC Built in 1996 (S/N XM120052-170) All documents and measurement protocols are available. Many accessories Not checked for functionality Sold only to commercial enterprises! All information without guarantee

TECHNICAL DATA: Industrial use

Stacklift Polar LW 1200-6; cleaned and tested; 2 pcs.available; Load capacity 1200kg; Format 1050x1480mm. Pile lift Polar LW1200-6; cleaned and checked; two on stock; lifitng capacity 1200kg; size 1050x1480mm.

Electric / control cabinet As good as new