132,187 used machines on RESALE, but how to find them? Machine Search
5 pieces consisting of four angle grinders, including a large MAKITA angle grinder with a grinding wheel diameter of 230 mm, type: GA 9050 R, year of construction: 2022, nominal speed: 6600 rpm, power: 2000 W three smaller angle grinders with a grinding wheel diameter of approx. 120 mm (see photos) a hand rod grinder DIE GRINDER, model number: S1J - 25, power: 750 W, mounting diameter: 6 mm for further data see photographed nameplate Reference: Schiller - Lot 16 Dimensions: 600mmx900mmx150mm Weight: approx. 70kg Auction-ID: A7-46763-188
Consisting of approximately 7 x cardboard with various plugs including 8x50+ 6x45+ 6x35+ 8x60+ 8x45 etc.., contents left side bottom shelf Auction-ID: A1-46604-330
Consisting of approximately 8 x cardboard with various plugs including 6x70+ 6x55+ 6x45+ 6x35+ 5x45+ 5x25 etc.., content left side top shelf Auction-ID: A1-46604-328
Manufacturing number: 5FBE1313432 Max. load capacity: 1200 k Fork length: 1200 mm Lifting height: approx. 4000 mm Reference: Pieper - Lot 109 Auction-ID: A7-46763-30
Serial number: GWH01703202060 Speed: 6501 rpm Motor power: 70 W Grinding wheel diameter: approx. 80 mm incl. collets Reference: Schiller - Lot 14 Dimensions: 250mmx120mmx200mm Weight: approx. 5kg Auction-ID: A7-46763-186
Tyres drive wheel solid rubber profiled; Load wheel tandem-LR polyurethane; Support Wheel Single Support Wheel Crawler gear sheikhride function & safety lift; Battery compartment Vertical change, 3PzS, preparation for wet batteries; Triblex Lift Mast Lifting Height: 4,266 mm | Overall height: 1,915 mm | Capacity: 1,395 mm; fork carriage 560 / 1150 / 55 mm; initial stroke initial stroke, soft landing of the fork carriage; Connect access control RFID, crash detection, usage analysis, Data Transfer Bluetooth, Bluetooth USB Stick; Paintwork RAL 2002 Red; Battery 24V 3PzS 375Ah vertical with Aquamatic, 160 A, Aquamatic Barrel 30L; Charger Intronic B Puls 24V/60A; Total length: approx. 2,057 mm (can go up to 2,390 mm depending on fork and model variant). Stem dimensions: approx. 907 mm. Net weight (without battery): approx. 800 kg to 950 kg; Service weight (incl. battery): Usually between 1,1 ...
ABB Control Cabinet - New For sale is a high-quality control cabinet from ABB with extensive control and automation technology. The control cabinet was professionally equipped but never put into operation and is therefore in new condition. Various high-quality ABB components as well as control and communication modules for industrial applications are installed. Details: Make: ABB New condition Never put into operation High-quality industrial design Original price approx. 150.000 € Dimensions and weight is approx Auction-ID: A7-46779-7
Connection: 230V, Power: 2.2kW Auction-ID: A1-46805-60242
incl. drawbars, in stock on pallet (1400x800x550 mm) Auction-ID: A1-46757-2169
Model: LDP150B Type: Three-phase electric pellet mill Engine power: 4 kW Power supply: 380 V – 50 Hz – 3 phases Recommended material moisture: 10–18% Production Capacity: Feed pellets: 90–120 kg/h Wood pellets: 50–100 kg/h Indicative production: 30–50 kg/h depending on the material used Galvanized steel feed hopper with protective grid Direct Coupling Transmission Independent electrical cabinet with: Ammeter Voltmeter Start/Stop Button Emergency stop Engine Thermal Protection Dimensions (L × W × H): 800 × 450 × 670 mm Net weight: 95 kg Gross weight: 110 kg Condition: New Auction-ID: A1-45887-134
• Audi 80 Sedan, built in 1984, petrol engine with 66 kW (90 hp), automatic transmission • Mileage: 234,617 km (read) • Engine running • Classic classic car with potential (over 30 years old) • Vehicle overall complete and solid base for enthusiast or restoration project • Interior well-maintained with signs of wear and tear • Bodywork with signs of wear and age-related paint defects • Underbody with visible corrosion, but appropriate for age • Robust and simple technology, good spare parts availability • Popular entry-level classic car Auction-ID: A7-46432-9003
New & orig. Charging cable: Type 2. Electrical connection: 400V. Auction-ID: A1-46700-35
Wheel arms for width over forks 560; Drive wheel solid rubber, profiled; Load wheel tandem-LR polyurethane; Training wheel simple; Speed rule. creep function & safety lift; Battery compartment Vertical change, 3PzS; Automotive Engineering; Preparation for wet batteries; Battery cable/connector: Battery cable with connector Perfect; Triplex Lift Mast Lifting Height: 4,266 mm | Overall height: 1,915 mm | Free lift: 1,395 mm; Fork version Fork length: 1150 mm Width across forks: 560 mm, Fork thickness: 55 mm4; Initial stroke: Initial stroke height 125 mm; Softlanding Soft landing of the fork carriage, automatic speed reduction of the forks when approaching the ground for a smooth setting of the goods; Connect: access control RFID Dual, crash detection, usage analysis, Bluetooth USB Stick; Paintwork RAL 2002 Red; Battery 24V 3PzS 375Ah vertical with 24V Aquamatik, Aquamatik Barrel 30L incl. ...
Magnet dimensions: 300 x 150 mm Grinding wheel diameter: approx. 150 mm Auction-ID: A7-46287-79
ABB Control Cabinet - New For sale is a high-quality control cabinet from ABB with extensive control and automation technology. The control cabinet was professionally equipped but never put into operation and is therefore in new condition. Various high-quality ABB components as well as control and communication modules for industrial applications are installed. Details: Make: ABB New condition Never put into operation High-quality industrial design Original price approx. 150.000 € Auction-ID: A7-46779-6
Very neat and little used electric pedestrian stacker, fully checked and ready for immediate use. Technical specifications Brand/Type: Still EXV14C Year of construction: 2020 Operating hours: only 840 hours Type: Pedestrian stacker Lifting capacity: 1400 kg Lifting height: 4144 mm Headroom: 2640 mm Free Lift: 0mm Mast: Duplex Fork length: 1140 mm Fork width: 560 mm ⚡ Drive & battery Drive: Electric Battery: 24V – 375Ah Battery type: 3 PZM 375 Year battery: 2018 Charger included Documentation Documentation available CE marking available Serial Number: F20321X00490 Transport & dimensions Dimensions: 1940 x 810 x 2590 mm Weight: 1234 kg Number of packages: 1 Terms and conditions Collection possible Free loading on truck Delivery possible on request Auction-ID: A3-43528-13512
Table dimensions: approx. 410 x 360 mm (inside ) with machine vice, jaw width: approx. 125 mm with swivelling work table Reference: Hansmann - Lot 34 Auction-ID: A7-46763-58
New & orig. Charging cable: Type 2. Electrical connection: 400V. Auction-ID: A1-46700-36
Three industrial brushless servo drives/amplifiers, model EASY 600 R16 Auction-ID: A7-46756-470
ABB Frequency Inverter / Industrial Control Cabinet – new For sale is a high-quality ABB frequency inverter with extensive control and power technology in industrial design. The plant was professionally built and equipped, but never put into operation and is therefore in new condition. High-quality ABB components as well as modern control and drive technology for industrial applications are installed. Details: Make: ABB Frequency converter / industrial control cabinet New condition Never put into operation High-quality industrial design Original price approx. 200.000 € Auction-ID: A7-46779-9
Pallet truck disassembled, battery available Auction-ID: A1-41946-145
Serial number: H2X386A03893 max. load capacity: 1800 kg Fork length: 1200 mm incl. charger Reference number: Pieper Lot 6 Auction-ID: A7-46763-3
Consisting of approximately 40x box with various dimensions, unused, + cardboard with castors, on middle shelf rack Auction-ID: A1-46604-305
Consisting of approximately 10 boxes with various plugs including 5x25+ 6x30+ 8x40+ 10x50+ 12x60 etc.., contents right side top shelf Auction-ID: A1-46604-325
Consisting of 38 pieces and a clamping system, also original from the manufacturer EROWA Dimensions per electrode holder: 500 x 500 mm Reference: Dommel - Lot 8 Weight: approx. 20kg Auction-ID: A7-46763-377
Consisting of approximately 8 x cardboard with various plugs including 10x50+ 8x135+ 8x100 etc.., content middle lower shelf Auction-ID: A1-46604-329
Three industrial brushless servo drives/amplifiers, model EASY600 R16. Input supply: 400 Vac 3-phase ±10/-20%, 50/60 Hz, 16 Arms, power input 10.8 kVA. Made in Italy. Cooling fan equipped. Auction-ID: A7-46756-468
Load capacity: 3000 kg Lifting height: up to 3250 mm Fork length: 1200 mm Attention: possibly defective Auction-ID: A7-46287-110
Single-phase version Engine power: 4 kW Hourly production: about 30 to 50 kg depending on the material used Integrated control cabinet with amperage tracking Control panel with: Ammeter Voltmeter Emergency stop button (E-STOP) Start/Stop Buttons Electric motor with direct drive Power supply: 230 V single-phase Metal feed hopper Auction-ID: A1-45887-126
Power supply: 380V-50Hz / 9 KW Volume: 4000cm2 The main purpose is the rapid heat sealing of products, which preserves their juiciness inside and creates a crispy shell on the outside.Designed for baking meat, fish, seafood, grilling vegetables Auction-ID: A7-46794-33
New & orig. Charging cable: Type 2 plug. Electrical connection: 400V. Auction-ID: A1-46700-34
Industrial surface grinding machine for machining flat surfaces. Equipped with NC control, magnetic table and sprinkler system with tray and filtration. Auction-ID: A1-46647-11
Three industrial brushless servo drives/amplifiers, model EASY600 R04. Input supply: 400 Vac 3 Phase ±10/-20%, 50/60 Hz, current input line 4.0 Arms 3 phase, power input 2.70 kVA. Made in Italy. Auction-ID: A7-46756-469
Zallys M10 electric drag conveyor, designed for the movement of heavy loads. Towing capacity: up to 10,000 kg (15,000 kg with upgrade). Maximum speed: 5.0 km/h (front and back). Maximum slope that can be surpassed: 15%. Maximum pulling force to the hook: 3,800 N. AGM traction batteries, 24V, 335 Ah, with high frequency external charger. Weight with batteries: 409 kg. Turning radius: 2,510 mm. Dimensions: 1,789 x 925 x 1,232 mm. Pneumatic wheels, with the option of superelastic. Includes 5-level speed selector and presence sensor at the helm. Made in Italy by Zallys srl. Auction-ID: A7-46053-45
\"The Elmo Rietschle V-VTN41 dry vane vacuum pump is an industrial equipment designed to generate a stable and reliable vacuum in various applications, such as industrial processes, suction or packaging. The V-VTN41 model from Elmo Rietschle offers a nominal volume flow of 42 m³/h and a limited vacuum of 150 mbar, ensuring consistent and efficient performance. Its design minimizes vibration, ensuring smooth and quiet operation. Compact and robust, this pump has dimensions of 58 cm in length, 40 cm in width and 27 cm in height, for a weight of 47 kg, making it easy to install and handle. Offered as is, the Elmo Rietschle V-VTN41 represents a reliable and high-performance solution for industrial applications requiring a controlled and stable vacuum.\" Auction-ID: A1-46647-32
Metal cabinet with sliding door, filled with various industrial electrical components. Auction-ID: A7-46756-12
total dimension L: 3690 mm; total dimension W: 1710 mm; total dimension H: 1650 mm; battery: no!; Auction-ID: A7-46263-26
Type: Electric Wire Rope Hoist Brand: Morris Model: 400 Series Year: 2005 Execution: - Electric wire rope hoist with drum - Integrated electric motor (Morris) - Mounted on trolley frame with rollers - Steel wire rope with hook - Control box included Technical data: - Standard: BS2573 Part 2 Rating M - Serial No.: Q1Z / D68877 (as visible) Equipment: - Wire rope drum - Hook block - Trolley / carriage system - Electrical control box - Cable wiring (partly loose) Condition: Used Auction-ID: A7-45993-99
Type: Electric Stair Climbing Hand Truck Brand: LectroTruck Model: not specified Execution: - Battery-powered stair climbing system - Integrated lifting drive mechanism - Foldable transport platform (toe plate) - Dual large pneumatic wheels + support wheels - Load securing strap Function: - Transport of heavy loads over stairs - Assisted lifting and lowering via electric drive Features: - Stair climbing mechanism with step-by-step lift - Ergonomic handle frame - Robust steel construction - Compact foldable design for transport Condition: Used Auction-ID: A7-45993-88
Overview Industrial hydraulic power unit composed of steel oil tank with electric motor and hydraulic pump mounted on the top. Technical details - Type: Hydraulic Power Unit - Tank: Steel oil tank - Motor: Top-mounted electric - Pump: Integrated hydraulic pump - Instrumentation: Pressure gauge - Control: Manual control valve - Maintenance: Filling/breathing cap - Connections: Outlet for hydraulic hoses - Power supply: Three-phase industrial plug (3 phases) - Application: Industrial hydraulic systems and machinery Included Accessories - Not specified Status and location Used condition – sold as is, without warranty. Auction-ID: A7-45941-42
Make: J. Schneider Elektrotechnik GmbH Type: Industrial Transformer / Power Supply Unit Model: DLAB 50F Year: 1999 Serial number: 203937/1 Technical data: - Rated power: 34 kVA - Frequency: 50 Hz - Primary voltage: 360 / 380 / 400 V - Primary current: 87 / 83 / 78 A - Secondary voltage: 415 / 436 V / 200 V - Secondary current: 76 / 77 A / 156 A - Phase: 3-phase - Protection class: IP33 - Cooling: Air (AN) - Standard: VDE 0532 Equipment: - Integrated electrical cabinet with main switch - High leakage current transformer system - Industrial heavy-duty housing - Power connection cables included Application: - Power supply for industrial machinery - Suitable for CNC machines or heavy equipment Condition: Used Auction-ID: A7-45993-46
Make: Jungheinrich Type: Electric Pallet Truck Technical data: - Drive type: Electric Equipment: - Electric drive with tiller control - Integrated battery compartment - Polyurethane load wheels - Emergency stop button - Battery charge indicator Condition: Used Auction-ID: A7-45993-50
Overview Portable hydraulic group powered by gasoline engine, designed for mobile applications on site and industrial use. Technical details - Type: Portable Hydraulic Power Unit - Engine: Petrol (estimated 4–6 kW) - Starter: Manual by puller (recoil starter) - Frame: Protective steel frame - System: Hydraulic with hoses included - Connections: Quick couplings - Control: Panel with joysticks and safety signage - Noise level: 100 dB (according to label) - Application: Use in field, construction and mobile hydraulic machinery Included Accessories - Hydraulic hoses - Quick couplings Status and location Unknown condition – sold as is, without warranty. Auction-ID: A7-45941-43
Machine type: Electrode Welding Machine (Stick Welder) Manufacturer: Dalex Model: TK-34 L Kombi Control: Manual Year: n/a Serial number: n/a Working hours: n/a Welding type: MMA / Stick welding Voltage: 220 V / 380 V selectable Adjustment: Rotary current adjustment Cooling: Air cooled Mobility: Mobile unit with transport trolley Cable set: Included (welding cables) Electrode holder: Yes Accessories: Electrode holder, cables, trolley, electrode storage Remarks: Used condition with visible wear and corrosion on frame. Functional condition not tested. Dual voltage capability (220V / 380V). Own mass: approx. 120 kg Dimensions (LxWxH): approx. 600 x 400 x 900 mm Auction-ID: A7-45993-4
Brand: Bulmor Model: EMU 30 Type: Electric multidirectional sideloader Power source: Electric (external charger included) Load capacity: 3000 kg Steering: 4-way / multidirectional Auction-ID: A7-46263-21
- Complete wet gas purification system designed for the removal of fine particles. - Flow rate of gases to be treated 105,000 Nm³/h. - Operating temperature 70°C. - Design temperature 99 °C. - Operating pressure: –0.025 / +0.1 barg. - Main components included: • Main wet electrofiltration tower, equipped with perimeter platforms, stairs and railings. • Water and sludge separation system. • KRAFTPOWER transformer with GBQE 80/3500 Micro. • Auxiliary filter for pre-filtering of coarse particles before entering the electrofilter. • FIDIA electrical control panel, with PLC and touch screen for monitoring operating parameters. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health a ...
Make: Various (Makita, Bosch, DeWALT, others) Type: Lot of Power Tools Models: Mixed / assorted Serial number: n/a Technical data: - Power supply: 230 V (corded tools) - Battery tools: without batteries (as visible) Scope of delivery: - Cordless drills / drivers (multiple units) - Angle grinders - Electric drill (Makita, in case) - Rotary hammer (Bosch, in case) - Orbital sander - Additional accessories and cases as visible Condition: Unchecked Auction-ID: A7-45993-53
degree:900 working heigth:100 mm width:4 x 330 mm dimensions of the machine ca.:20,4 x 3,5 x 2,5 m GENERAL INFORMATION ?Electrically heated roller kiln Mod. TR 18/4x33/10-E 90 ?Condition: as new. Price as new 1,2 Mio. ?. ?Offer for immediate sale There are many different areas of application (e.g. burning in metal, roof tiles, etc.). SPECIFICATIONS The kiln is an electrically heated roller kiln. The product is mechanically transported through the kiln on a roller conveyor. The kiln is designed in such a way that no special foundation is required. The usual concreted, screededflat hall floor is sufficient. The dimensions of the sections of the plant, which consists of heating, sintering and cooling zones, are adapted to the requirements of the temperature curve. Temperatures and pressures in the kiln are controlled automatically. The kiln casings are modular. Each housing is lined with di ...
maximum number of results exceeded
please refine your search
1 € 
