weinig el used for sale

Number of boring spindles: 3 St. Number of tools: 1.3/4.1. St. Spindle diameter: 50,40 mm Spindle length: 120,320,125 mm weight: 2500 kg loading dimensions L x W x H: 3800x1400x2000 mm table length: 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables,  ...

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998

Key data: 5 , 260 mm, 160 mm

Number of Spindles: 5 Spindle arrangement: u-r-l-o-u Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Working width adjustment: digital Working height adjustment: digital Feed speed: 20 m/min Table height constant: approx. 800 mm Bevel units: 1 Diameter of the suction nozzles: 140 mm Weight: 2500 kg Space requirement: 3650x1500x2000 mm Voltage/Frequency: 380V

Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition

WEINIG moulder, type Unimat 23E, Manufacture year 2005, Machine specifications:, - Planing width 230 mm, - Planing height 120 mm, - Cardan feeding, motor 3 kW, - Feed speed 6 – 36 m/min, Spindle layout:, 1. Horizontal bottom spindle, 5.5 kW, 2. Vertical spindle right, 11 kW, 3. Vertical spindle left (with no. 2), 4. Vertical spindle right, 5.5 kW, 5. Horizontal top spindle, 11 kW, 6. Horizontal bottom spindle, 5.5 kW, - Surface table 2500 mm, - Motor brakes, - Feeded table rollers, - Waxalite pump, - Spindle diameter 40 mm, - Incl. accessories

Key data: 6 , 190 mm, 120 mm

SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)

max. workpiece length: 4500 mm profile spindle: 1 Stück main drive: 20 kW Control: Siemens Weinig Conturex 2 C 114 --------------------------------------- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm -------------------------------------- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: --------------------------------------- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: --------------------------------------- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head --------------------------------------- For horizontal and vertical drilling and milling work without tool changes --------------------------- ...

SPECIFICATIONS: Feed length: 1970 mm Working width: 230 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Direct drive / cardan (0.25 kW x 3 motors) Speed: 6000 rpm Installed power: 22.9 kW Voltage: 380 V Spindle configuration: I Bottom (4 kW) II Right - Left (7.5 kW), Left equipped with electronic control III Top (5.5 kW) equipped with electronic control IV Bottom (4 kW) EQUIPMENT: Complete with tools

Weinig Uniplan Hydromat with jointer 220mm

WEINIG moulder, type Hydromat 22B, Machine specifications:, Planing width 220 mm, Planing height 120 mm, Feed speed 6 – 60 m/min, Motor power hydraulic feeding 15 kW, Spindle layout:, 1. Horizontal bottom spindle, motor power 11 kW, 2. Vertical right spindle, motor power 7.5 kW, 3. Vertical left spindle, motor power 11 kW, 4. Vertical right spindle, motor power 7.5 kW, 5. Vertical left spindle, motor power 7.5 kW, 6. Horizontal top spindle, motor power 11 kW, 7. Horizontal bottom spindle, motor power 15 kW, 8. Horizontal top spindle, motor power 11 kW, 9. Horizontal bottom spindle, motor power 7.5 kW, - Hydraulic front bearing for spindle 1, 6 - 8, - Equipped with jointers, - Surface table 2500 mm, - Spindle diameter 50 mm, - Automatic lubrication system, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Digital read out feeding speed, - Incl. accessories

WEINIG moulder, type Unimat 1000 Star, Manufacture year 2003, Machine specifications:, - Planing width 230 mm, - Planing height 120 mm, - Cardan feeding, motor 7.5 kW, - Feed speed 6 – 36 m/min, Spindle layout:, 1. Horizontal bottom spindle, 11 kW, 2. Vertical spindle right, 7.5 kW, 3. Vertical spindle left 11 kW, 4. Vertical spindle right, 7.5 kW, 5. Vertical spindle left 7.5 kW, 6. Horizontal top spindle, 15 kW, 7. Horizontal bottom spindle, 7.5 kW, 8. Horizontal top spindle, 7.5 kW, - Surface table 1050 mm, - Spindles 8000 rpm, - Motor brakes, - Feeded table rollers, - Waxalite pump, - Spindle diameter 40 mm, - Incl. accessories

Weinig high speed planing line 150 m/min with destacking, infeed system and outfeed system with automatic stacking system, Consisting of:, 01. Weinig cross chain transport for wood packages, 02. Weinig tilt hoist, 03. Transport belt for stacking sticks, 04 Weinig cross chain transport, 05 Weinig unchrambler, 06. Weinig cross chain transport, 07 Weinig automatic infeed system, 08. Weinig moulder Hydromat 30 XL, 6 spindles: B-T-R-L-T-B, max. 150 m/min, 09. Weinig transport belt, 10. Weinig outfeed system cross transport, 11. Weinig automatic stacking system, 12. Weinig cross chain transport for wood packages

WEINIG high speed moulder, type Hydromat Super 30-B, Machine specifications:, - Planing width 300 mm, - Planing height 120 mm, - Electric driven feeding system, motor 55 kW, - Feed speed 8 - 180 m/min, Spindle lay-out:, 1. Horizontal spindle bottom, motor 22 kW, 2. Horizontal spindle top, motor 30 kW, 3. Vertical spindle right, motor 18,5 kW, 4. Vertical spindle left, motor 22 kW, 5. Horizontal spindle top, motor 30 kW, 6. Horizontal spindle bottom, motor 37 kW, 7. Horizontal spindle bottom, motor 45 kW, 8. Horizontal spindle top, motor 30 kW, 9. Horizontal spindle top, motor 22 kW, - Front bearing for horizontal spindles 1+2+5, 6, 7, 8 and 9, - Digital positioning for spindle 3+4+8, - Short infeed table, - Bed plates hard chrome, - Automatic lubrication system, - Heavy duty feed rollers 220 mm, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Feed speed frequency contro ...

WEINIG 5-spindle moulder mod. PROFIMAT P23E – CE compliant -Composition: - Oriz. Inf. 5.5Kw -Vert. right/left 7.5Kw - Oriz. sup. 7.5Kw - Oriz. Inf. 4 Kw - Width 230mm - ATS system - Year 1997 (CE)

Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...

WEINIG 5+1 spindle moulder mod. PROFIMAT 23 FORTEC - CE compliant - Complete with ATS device - 1st lower horizontal shaft - 2nd vert. Dx - 3rd vert. Sx - 4th upper horizontal - 5° lower horizontal - 6th universal - Width 230 mm. - Cardan drive - Year 2002

WEINIG GRECON double-head finger joint line mod. PJ 150/500 - CE - Wood length at the entrance 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Press length 6100 - Pressure force 120 kN - 15Kw cutter motor - 5.5Kw engraver - Year 2004 CE

Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: mm Feed motor: 2,2 kW Feed speed: 5 - 22 , Stufenlos m/min. total power requirement: 17 kw Dimensions (L/W/H): 3.310 x 1.740 x 1.700 mm weight of the machine ca.: kg spindle diameter: 40 mm turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8653 Type: Hydromat 23 Producer: Weinig Generated: 2000 Parameters: Maximum vertical spindle speed: 6000 1/min Number of Spindles: 8 Spindle diameter: 50 mm Machine height: 1740 mm Machine length: 3900 mm Machine width: 1900 mm Machine weight: 4600 kg

Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm

SPECIFICATIONS: Machine inlet: 1970 mm Working width: 230 mm Working height: 120 mm Spindles: Ø 40 mm Number of Spindles: 6 Shaft drive Installed power: 38 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (4 kW) 2-3: right-left (11 kW) 4: top (7.5 kW) 5: bottom (5.5 kW) 6: universal (5.5 kW) EQUIPMENT: Miscellaneous Accessories

SPECIFICATIONS: Feed length: 1980 mm Working width: 220 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 8 Shaft drive (7.5 kW) Installed power: 64 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (5.5 kW) 2: right (5.5 kW) 3: left (5.5 kW) 4: right (5.5 kW) 5: top (7.5 kW) 6: bottom (7.5 kW) 7: top (11 kW) 8: bottom (7.5 kW) EQUIPMENT: Complete with accessories

Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system 7.5kw Down Left 11kw rights Mount 75kw Down 5.5kw Pneumatic clamps divided into 2 sections Feed speed adjustable by variator 5-24m/min CE Certificate Technical documentation Net price 68,000zł

Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation

SPECIFICATIONS: Machinable tool: max. 230 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Replacement Grinding Wheels

diameter - cutter special: 30 mm draw-in arbor diameter: 40 mm clamping height: 310 mm circle diameter: 80-300 mm weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window system ---------------------------------------------- Manufacturers description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transvers ...

This WEINIG Unimat 23 E was manufactured in 1999, designed for efficient wood planing. Ideal for woodworking professionals looking to enhance their production capabilities. Contact us for more information.

This 5-axis WEINIG U23 wood moulder was manufactured in 1991. Ideal for detailed woodworking, it offers precision and efficiency. Consider the opportunity to buy this WEINIG U23 wood moulder. Contact us for more information about this machine.

Number of spindles: 3 St. Number of tools: 8 St. Spindle diameter: 50 mm Dimensions (L/W/H): 4250x1850x2300 mm Weinig Univar 6 CNC ---------------------------------------- Technical details summary (please ask for possibly more included equpment) ---------------------------------------- 1st profiling spindle: ---------------------------------------- > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: ---------------------------------------- > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel, CNC > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool dia ...

WEINIG moulder, type Profimat 22N

WEINIG moulder, type Unimat 23E (blue line), Manufacture year 1998, Machine specifications:, - Planing width 230 mm, - Planing height 120 mm, - Cardan feeding, motor 4 kW, - Feed speed 6 – 36 m/min, Spindle layout:, 1. Horizontal bottom spindle, 7.5 kW, 2. Vertical spindle right, 11 kW, 3. Vertical spindle left (with no. 2), 4. Horizontal top spindle, 11 kW, 5. Horizontal top spindle, 11 kW, 6. Horizontal bottom spindle, 11 kW, - Surface table 2500 mm, - Motor brakes, - Grooved table, - Feeded table rollers, - Waxalite pump, - Spindle diameter 40 mm, - Complete with tooling and accessories

WEINIG moulder Unimat 23EL, Manufacture year 2002, Machine specifications:, - Planing width 20 - 180 mm, - Planing height 8 - 120 mm, - Electric feeding system, motor 15 kW, - Feed speed frequency drive 6 - 40 m/min, Spindle lay-out:, 1. Horizontal spindle bottom, motor 11 kW, 2. Vertical spindle right, motor 11 kW, 3. Vertical spindle left, motor 15 kW, 4. Vertical spindle right, motor 7.5 kW, 5. Vertical spindle left, motor 15 kW, 6. Horizontal spindle top, motor 22 kW, 7. Horizontal spindle bottom, motor 7.5 kW, 8. Horizontal spindle top, motor 22 kW, 9. Horizontal spindle bottom, motor 18.5 kW, - Spindle diameter 50 mm, - Spindle 2 - 5 + 8 are 8000 rpm, - Spindle 9 adjustable 4000 – 8000 rpm, - LogoCom controller, - Short infeed table, - Automatic lubrication system, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Separate electricity trunk with separate control p ...

WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Technical data: Year of manufacture: 1997 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Return transport / mechanisation compatible with Weinig Univar for transporting entire window sashes, panels or similar large workpieces. Technical data: Technical specifications: On request Condition: Gebraucht Location: Tauberbischofsheim, Germany

A wide range of second-hand spare parts, as well as complete units, control systems and switchboards for Weinig Univar (and other brands) are always in stock. Please contact us. Sample images. Condition: Gebraucht Location: Tauberbischofsheim, Germany