weinig el used for sale

1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel:  400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder

Linear drive, linear gearbox, lifting gear, spindle drive, linear unit, linear guide, linear axis, linear actuator -Manufacturer: Thomson, linear actuator Electrak E150 -Type: DF36-10W51-03L02MM -Dimension: 300/200/H110 mm -Weight: 2.2 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: TR Electronic, rotary encoder encoder -Type: IE58A -Art.No: 219-00074 -Shaft: Ø 6 x 12 mm -Dimension: 85/58/H70 mm -Weight: 0.4 kg

Rack Oven Miwe Rollin RI 1.0608-TL Electric A used rack oven Miwe Rollin electric 60x80 built in 2008 with 2 rack trolleys is currently for sale and immediately available in stock. Rack oven Miwe Rollin RI 1.0608-TL 60x80 Electric - Electric rack oven Rotary oven - Miwe Rollin 60/80 - for 58x78cm trays - Optionally with rack trolley - With drive-on ramp - With Miwe control - Nominal consumption : 72.6 kW - Year of construction 2008 More information and pictures on request

Servomotor, actuator, air flap servomotor, geared motor -Manufacturer: ELVI, actuator -Servomotor: Type 100605 -Voltage: 24V -Quantity: 3x drive available -Price per piece -Dimension: 190/110/H125 mm -Weight: 1.6 kg/pc.

Name: Hydraulic Power Unit with Electric Motor and Oil Tank Manufacturer: HYDAC (engine by Elprom S.R.L.) Type: 80C4 3030923 Short Description: Compact hydraulic power unit consisting of an electric motor from Elprom (type 80C4), mounted on a HYDAC oil tank with integrated hydraulic block. Suitable for hydraulic applications in machine tools or industrial plants. Power: 1.1-1.3 kW at 230/400 V, 50 Hz. IP54 rating.

Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer, regulator -Manufacturer: Elvo, potentiometer controller with on/off switch -Type: ED 1.5 GS -Voltage 220 V 1.5 A 270 W -Dimensions: 105/75/H135mm -Weight: 0.3 kg

Very good condition Z-elevating belt. Measurement in the photo album, please reach out for more information.

Safety Relay Elan SRB-NA-ST99-24VDC STAMA MC 325/S Manufacturer: Elan Type: SRB-NA-ST99-24VDC Condition: used Dimensions: 90×85×125 mm Weight: 0.57 kg Origin: STAMA MC 325/S Price: (plus VAT)

Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer, regulator -Manufacturer: Elvo, Potentiometer controller with on/off switch -Type: ED 1.5 G -Voltage: 220 V 1.5 A 330 W -Dimensions: 135/75/H100 mm -Weight: 0.3 kg

Safety Relay Elan SRB-NA-ST99-24V STAMA MC325/S Manufacturer: Elan Type: SRB-NA-ST99-24V Condition: used Dimensions: 90×85×125mm Weight: 0.57kg Removed from: STAMA MC325/S Price: (plus VAT)

"The machine from 1992 is still in productive use and will be available from week 35." More details please on request!

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor -Type: Elmo-G 2 BH2 000-0AH02 -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 250/235/H255 mm -Weight: 8.6 kg

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm -Total dimensions: Ø 440 x 200 mm -Weight: 3.5 kg

An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich.

3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with new computer in 2023 Speed infinitely variable up to 24,000 rpm Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible A total of 8 material tensioners Spindle in very good condition, spindle pull-in force: 12.5 kN Protective fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: MZ 07 21 A4 -Dimensions box: 125/80/H25 mm -Weight: 0.1 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: IA 08 01 00 -Dimensions box: 100/75/H10 mm -Weight: 0.1 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: B 12 01 04 -Dimensions box: 125/80/H25 mm -Weight: 0.1 kg

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Key data: 420 mm, 5150 mm, 420 mm

Elmag Giant Line 420 NC Drive motor 7.5 KW Hydraulic motor 1.5 KW Frequency-controlled saw blade drive 20-80m/min Powered chip brush Screw shavings conveyor Cutting data: Round max. 420mm Rectangle 420x420mm Saw blade length 5150x41x1.30mm Machine from stock / subject to prior sale. Make an appointment for a viewing.

hydraulic filter, filter element -Manufacturer: Hydac, ventilation filter with filling strainer -Type: ELF 5-210-3.0 -Dimensions: Ø 176 x 355 mm -Weight: 2.7 kg

Demonstration article Slight signs of wear Milling and drilling unit MFB 16 Vario Standard equipment - Keyless chuck B 16 / 1 - 16mm - Tapered mandrel MK 2 / B 16 with IG M10 - Tightening spindle M10 - Emergency stop button / zero-voltage trigger - Tool Kit / Instruction Manual / CE Optional accessory - Coordinate table base plate for MFB 16 Vario - Milling set TITAN, 20 pieces, Ø 3 - 20 mm - Vise 3' / 75 mm for SUPERTURN 550/125 Vario - Collet Set MK 2 (ER 25), 10 pieces, 2 - 16 mm Free delivery throughout Austria Subject to prior sale

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

Key data: 75 mm, 2000 mm

Demonstration article Condition: slight signs of wear BSM 75x2000 Two-stage belt sander with contact wheel diameter 196 mm and large surface grinding surface 75x530 mm. With automatic tension regulator for constant sanding belt tension. Specifications: Sanding belt width 75 mm Surface grinding surface 75x530 mm Sanding belt length 2000 mm Grinding speed 1: 14.5 / 2: 29 m/s Contact wheel diameter 196 mm Drive motor power 3000 W Mains connection 400/50 V/Hz Length 700 mm Width 490 mm Height 1130 mm Weight 72 kg Swivel range >90° Extraction diameter 100 mm Subject to prior sale

Key data: 19 KW, 18 kVA

Demonstration article Condition: New instead of EUR 22.725,- DIESEL generator with KUBOTA D1105 engine, (supersoundproofed) incl. automatic start-stop system in the event of mains failure with DSE 7320, completely ready for operation and ready for connection, Control panel and automatic mains switching with 60A Switching capacity in external control cabinet for Wall mounting, including 3m intermediate cable, DSE battery trickle charger, 3potential free contacts for Remote signalling, leak-proof bottom pan, reinforced fuel lines, tank level gauge with display on Control panel Specifications: Voltage - Frequency 400 / 230 / 50 V/Hz Maximum power 3~400V 18 kVA Continuous power 3~400V 17 kVA Power 3~400V cont. 25 A Maximum power 1~230V 6.8 kVA Continuous power 1~230V 6.2 kVA Power: 1~230V cont. 27 A Fuel Type: Diesel Speed 3000 rpm Engine type Kubota D110 ...

Key data: 15 mm, 95 °

Drill Bit Grinding Machine DBG 315 W Specifications: Grinding range drill Ø 2.1 - 15 mm Grinding range point angle 95 - 135 ° Speed 4400 rpm Motor power 0.12 kW Mains connection 230/50 V/Hz Length 320 mm Width 180 mm Height 190 mm Weight 10 kg Free-angle grinding function Cross-grinding function including 11 collets 3-13 mm Freight costs throughout Austria EUR 9.90 from stock

Key data: 60 mm, 350 mm

Radial Column Drilling Machine RSBM 5/60 Standard equipment: - Keyless chuck B 16, 1 - 16 mm - Tapered mandrel MK 5 / B 16 - Reducing sleeve MK 5 / MK 4 - Tool set with expulsion wedge - Instruction manual / CE The RSBM 5/60 offers plenty of space for extra-large workpieces: - Cubature 630 x 500 x 720 mm - Spindle projection 350 - 1600 mm Specifications: Drilling capacity in steel 60mm Threading capacity M46 Spindle holder (turning spindle) MK 5 Speed range 25 - 2000 rpm Speed levels 16 Quill stroke 315 mm Quill feed stages 16 Quill feed 0.04 - 3.2 mm/rev T-slots, width (table/base) 22/28 mm Drill head stroke 580 mm Spindle projection 350 - 1600 mm Drill head rotatable ± 180 ° Quill spacing base 1220 mm Quill spacing table 0 - 720 mm Drilling table area 630x500 mm Drilling table height 500 mm Motor power 4000 W Lifting spindle drive 1500 W Mai ...

Key data: 360 mm, 420 mm

CNC lathe INDUSTRIE 360/140 'Inclined Bed Machine' Hydraulic lathe chuck and hydraulic tailstock incl. chip conveyor Control Siemens 828D incl. Shopturn Standard equipment: - CNC control SIEMENS SINUMERIK 828D - SIEMENS servo motor on X and Z axis - Hydraulic three-jaw lathe chuck 200 mm - Ball screws - 12-fold tool changer - Encapsulated working area - Hydraulic tailstock - LED work light - Operating tool -Auto. Central lubrication - Integrated oil lubrication - Integrated coolant device 120 l capacity - Main motor Siemens -Auto. Chip conveyor incl. container Specifications Center width 420 mm Center height 140 mm Turning diameter over bed 360 mm Turning diameter over carriage 180 mm Lathe bit cross-section, max. 20x20 mm Spindle holder (turning spindle) A2 - 5 / taper 5 mm Travel X-axis 140 Spindle bore 56 mm Speed range 1, infinitely variable 0 ...

Surface Grinding Machine Model HSG 400/1000 ALV Ready for operation: incl. oil filling. Advantages: Automatic on 3 axes Highest grinding precision and repeatability Ideal for series production Travel distance: 910 mm Incl. coolant extraction device and magnetic coolant cleaning system Specifications Workpiece / grinding table width max. 400 mm Workpiece / grinding table length max. 1000 mm Workpiece height max. 400 mm Grinding wheel speed 1450 rpm Grinding speed (max. permissible) 27 m/s Free delivery throughout Austria

fire: Eldan super chopper, model: SC2118-CB560, Electrical motor: 250 kW, Rotor length: 2100/82 mm, Rotor speed: 0-21 rpm, Knives – flying: 18 pieces, Knives – static: 10 pcs, Weight (approx.): 24000/53000 kg, Length: 2300 mm, Width: 3800 mm, Height: 4050 mm, Operating hours: 24000 hours, Year of construction: 2011

3 phase ONAN Transformer 20000V/400V Dyn 11, 50Hz From general service, new oil, Sale without guarantee, as is, where is

Transformer Description Manufacturer: Gonella Costruzioni Elettromeccaniche Location: United Kingdom Type: Three-Phase Transformer Power: 1600 kVA Frequency: 50 Hz Year: 1983 High Voltage : 10,000-20,000 ±5%, 92.38 A, 46.19 kV Low Voltage : 400-233.3 V, 2309.99 A

Packaging machine Paal / Bosch ELE 2ALS 1995 (Retrofit 2015) Retrofit (modernization): 2015 Availability: from August 2025 Condition: fully functional Connected loads: 400 V, 3 Ph, 50 Hz

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer -Manufacturer: Elsund, Transformer Type BBXB -Power: 2.233 kVA -Technical data: see photo type plate -Dimensions: 210/210/H255 mm Weight: 30 kg

Auxiliary switch, circuit breaker, miniature circuit breaker, load break switch, load isolator, circuit breaker, circuit breaker, auxiliary switch, main switch, on-off switch, cam switch -Manufacturer: Elektra, Motor switch on-off switch -Type: TAT 16 -Dimensions: 130/120/H75 mm -Weight: 0.3 kg

PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control -Type: Modicon TM241CEC24T -Input module: Modicon TM3DI8 -Dimensions: 175/90/H100 mm -Weight: 0.6 kg

PLC controller, electronic module, PLC control -Manufacturer: Schneider Electric, PLC control -Type: Modicon TM221CE24T -Number: 2x controllers available -Price: per piece -Dimensions: 110/105/H75 mm -Weight: 0.4 kg/pc.

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Schneider Electric, housing for crane remote control / pendant control -Type: XAC-A08 -Transport dimensions: 560/80/70 mm -Weight: 1.1 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D18M7C -Number: 1x contactor available -Dimensions: 80/45/H90 mm -Weight: 0.3 kg

Semiconductor relays, switchgear, switching components, semiconductor contactors, relays -Manufacturer: Crydom, Semiconductor relays -Type: ELS4850S -Number: 29 relays available -Price: per piece -Dimensions: 100/50/H130 mm -Weight: 0.5 kg/pc.

CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 480/70 -Elbe Art.No.: 0.107. see photo -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 480 mm -Weight: 3.4 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 380/70 -Elbe Art.No.: 0.107.110.0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 380 mm -Weight: 3.2 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/60 -Elbe Art.No.: 0.106.110.0001 -Flange Ø 65 mm -Bolt circle: Ø 52 x 6 mm -Dimensions: Ø 65 x 320 mm -Weight: 2 kg

PLC controller, electronic module, PLC control, analog input/output module, temperature input module -Manufacturer: Schneider Electric, PLC controller Analog input/output module -Type: Modicon TM3TM3 -Quantity: 1x control unit available -Dimensions: 95/90/H30 mm -Weight: 0.1 kg