weinig el used for sale

Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder

General Electric Äkta Valves and Pumps PV 908 INV 907 IV 908 P 960

Power converter, power supply, power supply, switching power supply, power supply module -Input: 3 x 360-520 V AC 50/60 Hz 2.40-1.70 A. -Output: 24 V 40 A DC -Price: per piece -Number: 6 pieces -Dimensions: 140/160/H130 mm -Weight: 3 kg/piece

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Ritz, active power transmitter -Type: ELMU-AHW4B-A3 -Number: 3x devices available -Price: per piece -Dimensions: 85/95/H110 mm -Weight: 0.5 kg

Model: EL390/1301 Quantity: 8 pieces Year of production: 2021 Travel 8000 mm Length 9000 mm

Grinding wheels are available, they are still unused and originally packaged in a box. 1x Elbe abrasive media (MICROREX) Shape: 01 Straight Disc 104228/1 400,00x200,00x203,20 58AY 80/2 KL 8 V for: 35 m/s forcibly guided; 30 m/s walk-behind 3x Elbe abrasives (MICROREX) Shape: 01 Straight Disc 104228/2 400,00x140,00x203,20 58AY 80/2KL 8V for: 35 m/s forcibly guided; 30 m/s walk-behind 1x Control disc 140mm. Comet (Elbe) S33728 Shape:01 Straight Disc 250,00x140,00x127,00 A120 R13 8-974-51/18 1x Regulating disc 200mm. Comet (Elbe) S32848 Shape: 01 Straight Disc 250,00x200,00x127,00 A120 R13 6-055-24/18 1x WISSCO dressing tile AP23NAD 1x Lifting crane for grinding media

ID3347 MTU 660 KVA Electric generator year/Baujahr 2000 approx. 150 hours/Stunden (accord. Counter MTU generator with 660 kVA, complete, MTU diesel engine type 12V 2000 G22 (565 KW) MTU genset with 660 kVA, complete, MTU diesel engine type 12V 2000 G22 (565 KW)

proximity switch -Ø: 3.6 x 20.5 -stainless -Protection class: IP 67 -Number: 7 pieces -Price: complete -Weight: 70 g

ABA Grinding Machine Starline CNC Profile Grinding Machine Surface Grinding Machine Hersteller [manufacturer]: ABA ELB Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Baujahr[construction year]: 10/2004 Weight [weight]: 6000kg Approx. (W x D x H): 4.1m x 5.1m x 2.5m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Phone +49 17621834834

wire electrode, welding wire, welding wire -Welding wire: Alumig Mg 5 -DIN: 1732/SG-AlMg 5 -O: 1.20 mm -Dimension: O 300/100 mm -Weight roll: 6 kg

Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 250F LV429372 -Rotary drive with: extension -without: button -Dimensions: 190/105/H575 mm -Weight: 3.0 kg

Electric stair climber Payload 200 kg Work safely and effortlessly Suitable for step heights up to 210 mm Robust aluminium housing foldable / fold-out incl. charger one battery charge is sufficient for approx. 1600 steps suitable for indoor and outdoor use Weight incl. batteries approx. 30 kg

We have a complete game SCHNEIDER ELECTRIC BRAND 3 QM/ 2 IM/ 1 CM/ DM2 First commissioning 2017 Next interview 2026

Key data: 7300 mm, 1000 mm, 650 mm

- Swivel angle A-axis: 0-90° freely programmable - C-axis swivel angle 0-355° freely programmable - Max. machining length without frontal machining: 7300mm - Max. machining length with front machining: 6980mm - Tool changer with 10 places, as well as a saw blade holder - 9 Material tensioner - Tool holder SK30 - 2-layer machining

Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE  ...

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

GENERAL Project No.: 905670 Quantity: 1 pcs. Manufacturer: TACCHELLA Type: Elektra 1018 MPC Control: MPC Year of Make: 1999 Condition: Used machine Layers approx.: less than 1 layer DESCRIPTION CYLINDRICAL GRINDING Max. grinding diameter 350 mm Max. grinding length 1000 mm Center height 180 mm Center width 1000 mm GRINDING SPINDLE UNIT Travel in X/Z 350/1180 mm Max. rapid traverse speed in X/Z 10/10 m/min Grinding headstock can be swivelled manually Belt-driven grinding spindle for external grinding wheel right with max. diameter x width x bore 400x50x127 mm left with max. diameter x width x bore 450x80x203 mm Max. circumferential speed 35 m/s2 Max. power at ED 10-40/100% 7.5 kW Mounting MK5/ASA4 TAILSTOCK Tailstock can be moved manually Tailstock quill holder MK4 Cylinder Fine Adjustment Tailstock Manual Dresser with dressing tile on tailstoc ...

Perkin Elmer Heater with Quartz Cuvette for Perkin Elmer AAS Systems

Powder curing furnace 3,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 58 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Powder curing furnace 4,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 4,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m³/h 10 electric motors 2 pcs 2x 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 74 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air ...

grinding length: 1000 mm grinding width: 375 mm workpiece height: 375 mm total power requirement: 9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 100 NA -Rotary drive with: extension -Terminal cover: 2 -Dimensions: 290/105/H510 mm -Weight: 2.3 kg

Key data: 550 °C, 1800 mm, 2500 mm

Plasma nitriding plant consists of: 2 pcs. hot wall double-bottom hood furnace Loading: movable hoods Volume: ø1.800 x 2.500 mm Workpiece weight (max.): 4.000 kg Wall temperature (max.): 550°C Connected load (total): 325 kW 4 pcs. batch stations 1 piece cleaning system

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg

Tapping chucks, tapping chucks, tapping chucks -Tapping chuck: with return -with: slip clutch -Cutting capacity: M8-M18 -Recording: MK3 -Quantity: 1x thread cutting chuck available -Price per piece -Weight: 3.4kg

Thyristor -Type: S6070W -Price: complete -Number: 3x 250 pieces -Dimensions: 175/130/H215 mm per package

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, power supply -AC power source: ZAF 0.5/270/2 -Line In: 90-264 VAC 47-63 Hz -Output: 500 VA Max -Dimensions: 560/430/H95 mm -Weight: 18.6 kg

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Inductive sensor, electronics sensor -High temperature resistant: 230 °C -Cable length: 20 m -Manufacturer designation: Cable socket 20 m -Type: VK B0 6F 41 -Number: 2x available -Price: per piece -Weight: 400 g

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Thyristor -Type: S6070W -Price: complete -Number: 250 pieces -Dimensions: 175/130/H215 mm -Weight: 1.3 kg

Proximity switch, cylinder sensor, magnetic field sensor -Diameter: 6.5mm Length: 30 mm -Cable length: 2 m -Product type: IFR 06.26.15 -Number: 5x available -Price: per piece -Weight 40 g

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Thyristor -Type: S8070W -Price: complete -Number: approx. 250 pieces -Dimensions: 175/130/H215 mm

Radiator Brand: Hydac Model : OK-ELH 10/1.0/H22/1/S/BT45/So10 3253734 The radiator is NEW and fully functional, see pictures for more details.

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

Bebro Electronic DC CAN alpha 2500145X Motor Controller for Jagenberg Diana Pro. Used, tested.

Radiator Blower and bracket Brand: Hydac Model : OK ELD8S/2.0/M/A/1/S061 The spare part is in good condition Nevertheless, this is a used items, which shows slight signs of wear, or may have. see pictures for more details.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 1000 mm z-travel: 1250 mm dividing head: CNC chip conveyor: Universal angular milling head 2-axis adjustable: control: Fagor type: 8025 : CNC clamping plate: 1500x3000 mm clamping plate: 1500x4000 mm clamping plate: 1500x4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inductive sensor, electronics sensor -M50 x 1.5 -Type: IN 50 60 40 -Number: 2x available -Price: per piece -Weight: 300 g

Ref. no.: 16369 Hersteller: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

proximity switch -Manufacturer: IPF Electronic -Product type: IN 40 60 40 -Number: 37x available -Price: per piece -Weight: 300 g