weinig ag used for sale

Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm - Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5 -20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 For sale on behalf of a customer, to be collected from site Machine can be viewed whilst still in operation Includes tools IV 77, IV 68, see PDF attachments ----------------------------------------- Technical Data Summary (please enquire about any additional accessories that may be included) Item 1: Cross-cut saw ---------------------------- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment beam for identifying the cut section > NC length stop, mounted on slotted table, included Positioning of the crosscut saw integrated into the control system. > Length 3,500 mm Item 2: Tenoning and slotting spindle ---------------------------- > N ...

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Feed motor: 4 kW Dimensions (L/W/H): 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer customer is still working on it, machine can be visited -------------------------------------- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm 3 units, table rollers ------------------------------- ------- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective, these could be reinstalled by an electrician. -------------------------------------- Additional technical data (former order confirmation) attached -------------------------------------- Price of the above- ...

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

2.0pcs Autonomous AGV Shuttle Cart -2 x AGV shuttle trolley with conveyor for 2 boxes each (Automated guided vehicle system with intelligent control for 2 boxes each -Charging

FBM PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-400 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.germanplas ...

COSTARELLI PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-450 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.ger ...

Year of manufacture 1987 Wire Stitching Machine 2 stitching heads Saddle and block stitching electr. Footswitch Delivery date: immediately

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

Haffmans/Norit karbonisierer, fuer inline karbonisierung von Getränken. Nur verwendet für Testzwecke. Durchflussmesser fehlt, weiter guten zustand.

<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now

<br>Spinner for Agfa Avantra 44 s - Clompete general&2011 with warranty<br><br>Verf Gbar: now

<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Optionc Inkdrive (ZIP3), DQS, and TIFF output are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

AGFA Viper 3.04 Software rip consisting of dongle, CDs (original 3.01 and update 3.04), APIS board and APIS adapter Available now

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Inkdrive(CIP3), DQS, and TIFF output options are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Pilot Series 3. Consisting of: CD and latest update, dongle<><br><br>br>Verf Gbar: now

Capstan engine for AccuSet - all the details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

Capstan sensors for AccuSet - all the details can be seen on the picture. The sensors are tested and come from a functional AccuSet. Available on stock

AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

cutting knife for AccuSet - all details can be seen on the picture. The cutting knife is tested and comes from a functional AccuSet. Available on stock

motor of the input cartridge for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

input cartridge for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

motor in front of the accretorial cassette for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

cassette for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

laser unit for ProSet9400 - all details can be seen on the pictures. The lasers come from a functional ProSet. Available on stock

control panel for Avantra25 - all details can be seen on the picture. The panel is tested and comes from a functional Avantra25. Available on stock

cassette for Avantra25 - all the details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

input cartridge for Avantra25 - all details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

<br>Complete system - still in production -Avantra 44 with 3600 dpi -AgfaLine 44 - short online processor -Agfa PDF-Rip -Agfa PrintDrive Series 3<br><br><br>Verf Gbar: after 10.07.2011

AGFA AccuSet 1500 plus with AGFA OLP and AGFA PDF-Rip for Windows. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now

AGFA AccuSet 1000 WE. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now