weinig ag used for sale

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant str ...

Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Window system WEINIG, Unicontrol 6, S/N 035-823, built in 1997 TECHNICAL DATA:  Pneum cross-cut saw. clocked (3 KW) with laser directional light  Slotted spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW  Synchronous spindle 50 x 120 mm - motor 7.5 KW  Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW  Fitting spindle pneum. clocked 40 x 160 mm - motor 3 KW  Saw/groove spindle horizontal top, pneum. clocked - motor 3 KW  Feed adjustable from 6-12 m/min. - Motor 1.1 KW  Screen control for 99 window types  Support strip for rung production pneum. Timed  Studio window setup with digital angle display  Length stop up to approx. 3,500 mm  Milling device with support rail  Return transport device to the machine operator  Machine complete with operating instructions, circuit diagrams, spa ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm # 6726 Weinig Unicontrol 12 CNC -------------------------------------------------------- Sale on behalf of a customer. Machine connected and ready for demonstration. crosscut saw -------------------------------------------------------- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate -------------------------------------------------------- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm -------------------------------------------------------- 1. tenoning Spindle ---------------------- ...

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

engine: 0,18 kW band length: 4.500 mm band width: 120 mm Infeed conveyor belt, outfeed conveyor belt or connecting conveyor belt Weinig LTB 120/4500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of knives: Z2 V2 width: 17 mm circle diameter: 160 mm material: Stahl : WP Bore diameter: 40 mm Jointing rebate cutter Weinig type 530 160 01 / 2 08 for use on the planing spindle of Weinig planing machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

Number of boring spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: kW Planing and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads. Including dismantling and loading. Fixed loading date: 15.06.2026. Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Spindle 5: Bottom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Excellent condition - Fully operational - Loading / Transport possible! Working width 13 to 230 mm Working height 6 to 120 mm Number of spindles 4 Motor power of dressing spindle 4 to 7.5 kW Motor power of vertical spindles 5.5 to 11 kW Motor power of upper spindle 4 to 11 kW Feeder motor power 1.5 kW Diameter of spindles 40 mm Tool flight circles of throat spindles 125 to 200 mm Adjustment range of spindles axial 30 mm Adjustment range of dressing spindle 5 mm Feed rate 8 m per minute Diameter of feed rollers 140 mm Width of feed rollers 2 x 50 mm Width of roller in outfeed table 50 mm Adjustment range for dressing table and ironing ruler 10 mm Height of right stops 60 mm Length of dressing table 2000 mm

Capacity: 230 x 130 mm. Number of shafts: 9 Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kW Kardan drive Pneumatic pushers Front surface table Feed rollers for short workpieces Manually operated pump for bed lubrication Shaft diameter: 50 mm. Powered rollers in the table Feed: 6 - 36 m/min Motorized height adjustment

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included

Capacity: 230 x 130 mm. Spindles: 7 Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kW spindles 2, 3, 4 and 5 are 8000 tr/min straight jointer on 2nd bottom spindle Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces 0,8 m infeed straightening table manual bed lubrication Spindle diameter: 50 mm. 5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kW motor height adjustment

Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed table In the machine 4 driven feedrollers Hardened table (with exception of the infeed table) Separate controll cabinet and electrical cabinet Automatic bed lubrication Pneumatic pressures Outfeed table with height adjustment 0/0,5/1 mm Sound enclosure with electromagnetic security Capacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm) Feedspeed: 6 - 36 m/min, motor 7,5 kW Number of spindles: 8 Spindle diameter: 50 mm Spindle speed: 6000 rpm Bottom 7,5 kW, outboard bearing Fence 7,5 kW Near 11 kW Fence 11 kW Top 15 kW, outboard bearing, straight jointer Bottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm) Top 11 kW, table prepared to take wooden inserts Bottom 11 kW, outboard bearing, straight jointer

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 kW Motorised height adjustment of top presssure beam Infeed table 2200 mm length tools not included

Number of boring spindles: 4 St. Working width: 230 mm Working height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min. Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of timber including infeed mechanization Weinig High Mech E 1. The machine has a Memory Plus system with electronic positioning (radial) of the spindles 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 7 St. Working width: 220 mm Working height: 120 mm total power requirement: 42 kw Feed motor: 7,5 kW Planing and moulder Weinig type Unimat 22 E for four-sided planing and profiling of timber incl. shuttering protection cabin, suction pipes and planing heads. Two driven rollers in the table. The machine is function-tested, dismantled and ready for loading. Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 4 kW / 40 mm Spindle 3: Left / 6.5 kW / 40 mm Spindle 4: Right / 5.5 kW / 40 mm Spindle 5: Top / 4 kW / 40 mm Spindle 6: Bottom / 4 kW / 40 mm Spindle 7: Top / 5.5 kW / 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

Number of boring spindles: 7 St. Working width: 170 mm Working height: 120 mm Planing and moulder Weinig type Unimat 17A for four-sided planing and profiling of timber with universal spindle. Incl. shuttering protection cabin, suction pipes and planing heads. Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Right Spindle 5: Top Spindle 6: Bottom Spindle 7: Uni The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ---------------------------------------------------------------------- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Table tops with guide blades at spindles 2 and 3. Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ---------------------------------------------------------------------- - Tec ...

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details.

Weinig Profimat 23 ATS four-sided planer Working width 230mm Working height 120mm Number of spindles 4 Spindle layout: 11kw pit Rights Left 11kw Top 11kw Pneumatic Material Clamps Feed speed adjustable 5-22m/min Input table length 2470mm 4kw feed motor CE Certificate Lashing diameter 4x140mm Net price

Very well preserved, rarely used grinding machine Weinig Tyo RONDAMAT R 980 for planer heads

Washing machine for planer heads Weinig type MTS Very good condition. Fully operational with Simatic OP 7 controller. Operator's manual. Machine can be taken over immediately.

Number of boring spindles: 6 St. Working width: 220 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: 5,5 kW Feed speed: 36 m/min. Grooved table: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 Four-Sided Planer – Window Version (With glazing bead separation feature, or usable as a grooving spindle) ATS Control and Program Control ------------------------------------- Technical Specifications Summary (Please inquire regarding any additional accessories that may be included) ------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight (approx.): 2500 kg Spindle Arrangement ---------- ...

Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2500 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2-12 m/min. weight of the machine ca.: 2500 kg 1 WEINIG VARIOMAT Planing and Moulding Machine --------------------------------------- Brief Summary: --------------------------------------- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturers Description: --------------------------------------- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom --------------------------------------- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right --- ...

Number of boring spindles: 8 St. Working width: 230 mm Working height: 160 mm Feed motor: 5,5 kW Feed speed: 36 m/min. Control: Logocom Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11. The control panel was equipped with the current Simatic Panel PC677C-15 in 2021. The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement. Spindle 1: Bottom / HSK Powerlock / 12,000 rpm Spindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpm Spindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpm Spindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 8: Bottom / HSK Powerlock  ...

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 6 working width: 230 mm planing height: 160 mm Control: ATS Driven table rollers: 1 feed: 24 m/min feed motor: 4 kW Length of the planing table: 2.500 mm Weinig Unimat 23 automatic planer and moulder for four-sided planing and profiling of timber with ATS system, reinforced Kaschwig shuttering protection cabin and universal spindle. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 5 St. Working width: 230 mm Working height: 120 mm Universal planer and moulder Weinig Profimat 23 for four-sided planing and profiling of timber. Including saw package for ripping timber with the 4th and 5th spindle. Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 10 , 240 mm

Four-sided planer Weinig Type: Unimat 23 / U 23 Year of manufacture 1994 CE Planing width 240 mm Planing height 160 mm (240 mm universal shaft) With 2 universal shafts 360° clamping length 240 mm Length of dressing table 2350 mm 10 planing shafts Arrangement of planing shafts and table rollers 1.Shaft bottom 7.5kw smooth driven roller in the table 2nd shaft right 7.5 kW 3rd shaft left 7.5 kW 4th shaft right 7.5 kW smooth driven roller in the table 5.Shaft top 7.5 kW 6.Shaft bottom 7.5kw smooth driven roller in the table 7.Shaft top 7.5 kW 8.Shaft bottom 7.5kw smooth driven roller in the table 9.Shaft Universal u, right, li, o 360° 7.5 kW smooth driven roller in the table 10.Shaft Universal u, right, li, o 360° 7.5 kW Smooth driven pull-out roller in the table Spindle diameter 40 mm Cardan feed, feed motor 8.6 kW Feed speed 6 – 36 m/min. Electric he ...

Weight: ca. 4.000 kg control: Sütron BT20 Number of boring spindles: 4 St. WEINIG UNIVAR 10 automatic rebate unit from a UC-Matic window system, without function. - Suetron BT20 control unit - Machine incomplete - Details on request - Picture similar. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

2.0pcs Autonomous AGV Shuttle Cart -2 x AGV shuttle trolley with conveyor for 2 boxes each (Automated guided vehicle system with intelligent control for 2 boxes each -Charging

FBM PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-400 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.germanplas ...

COSTARELLI PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-450 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.ger ...

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

Haffmans/Norit karbonisierer, fuer inline karbonisierung von Getränken. Nur verwendet für Testzwecke. Durchflussmesser fehlt, weiter guten zustand.