weinig ag used for sale

Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles: 4 Spindle arrangement Bottom 4wkw Rights Left 5.5kw Top 4kw Feed speed adjustable by variator 4-20m/min Total power 16kw

Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: mm Feed motor: 2,2 kW Feed speed: 5 - 22 , Stufenlos m/min. total power requirement: 17 kw Dimensions (L/W/H): 3.310 x 1.740 x 1.700 mm weight of the machine ca.: kg spindle diameter: 40 mm turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8653 Type: Hydromat 23 Producer: Weinig Generated: 2000 Parameters: Maximum vertical spindle speed: 6000 1/min Number of Spindles: 8 Spindle diameter: 50 mm Machine height: 1740 mm Machine length: 3900 mm Machine width: 1900 mm Machine weight: 4600 kg

Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm

Inv. Num. : 8663 Type: Opticontrol Producer: Weinig Generated: Parameters: Max. tool diameter: 300 mm Max. tool length: 330 mm

SPECIFICATIONS: Machine inlet: 1970 mm Working width: 230 mm Working height: 120 mm Spindles: Ø 40 mm Number of Spindles: 6 Shaft drive Installed power: 38 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (4 kW) 2-3: right-left (11 kW) 4: top (7.5 kW) 5: bottom (5.5 kW) 6: universal (5.5 kW) EQUIPMENT: Miscellaneous Accessories

Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Feed length: 1980 mm Working width: 220 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 8 Shaft drive (7.5 kW) Installed power: 64 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (5.5 kW) 2: right (5.5 kW) 3: left (5.5 kW) 4: right (5.5 kW) 5: top (7.5 kW) 6: bottom (7.5 kW) 7: top (11 kW) 8: bottom (7.5 kW) EQUIPMENT: Complete with accessories

Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system 7.5kw Down Left 11kw rights Mount 75kw Down 5.5kw Pneumatic clamps divided into 2 sections Feed speed adjustable by variator 5-24m/min CE Certificate Technical documentation Net price 68,000zł

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

SPECIFICATIONS: Machinable tool: max. 230 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Replacement Grinding Wheels

Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation

Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Spindle layout: Lower 4kw Rights Left 5.5kw Upper 5.5kw Lower 4kw Universal 4 Feed speed adjustable by variator 6-22m/min 3kw feed motor power Adjustable spindles

diameter - cutter special: 30 mm draw-in arbor diameter: 40 mm clamping height: 310 mm circle diameter: 80-300 mm weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

This WEINIG Unimat 23 E was manufactured in 1999, designed for efficient wood planing. Ideal for woodworking professionals looking to enhance their production capabilities. Contact us for more information.

This 5-axis WEINIG U23 wood moulder was manufactured in 1991. Ideal for detailed woodworking, it offers precision and efficiency. Consider the opportunity to buy this WEINIG U23 wood moulder. Contact us for more information about this machine.

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window system ---------------------------------------------- Manufacturers description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transvers ...

WEINIG moulder, type Profimat 22N

Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details.

Number of spindles: 3 St. Number of tools: 8 St. Spindle diameter: 50 mm Dimensions (L/W/H): 4250x1850x2300 mm ! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION ! ! Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel,  ...

WEINIG moulder, type Unimat 23E (blue line), Manufacture year 1998, Machine specifications:, - Planing width 230 mm, - Planing height 120 mm, - Cardan feeding, motor 4 kW, - Feed speed 6 – 36 m/min, Spindle layout:, 1. Horizontal bottom spindle, 7.5 kW, 2. Vertical spindle right, 11 kW, 3. Vertical spindle left (with no. 2), 4. Horizontal top spindle, 11 kW, 5. Horizontal top spindle, 11 kW, 6. Horizontal bottom spindle, 11 kW, - Surface table 2500 mm, - Motor brakes, - Grooved table, - Feeded table rollers, - Waxalite pump, - Spindle diameter 40 mm, - Complete with tooling and accessories

WEINIG moulder Unimat 23EL, Manufacture year 2002, Machine specifications:, - Planing width 20 - 180 mm, - Planing height 8 - 120 mm, - Electric feeding system, motor 15 kW, - Feed speed frequency drive 6 - 40 m/min, Spindle lay-out:, 1. Horizontal spindle bottom, motor 11 kW, 2. Vertical spindle right, motor 11 kW, 3. Vertical spindle left, motor 15 kW, 4. Vertical spindle right, motor 7.5 kW, 5. Vertical spindle left, motor 15 kW, 6. Horizontal spindle top, motor 22 kW, 7. Horizontal spindle bottom, motor 7.5 kW, 8. Horizontal spindle top, motor 22 kW, 9. Horizontal spindle bottom, motor 18.5 kW, - Spindle diameter 50 mm, - Spindle 2 - 5 + 8 are 8000 rpm, - Spindle 9 adjustable 4000 – 8000 rpm, - LogoCom controller, - Short infeed table, - Automatic lubrication system, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Separate electricity trunk with separate control p ...

Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen. max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300 mm, Maschine ...

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant str ...

Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Window system WEINIG, Unicontrol 6, S/N 035-823, built in 1997 TECHNICAL DATA:  Pneum cross-cut saw. clocked (3 KW) with laser directional light  Slotted spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW  Synchronous spindle 50 x 120 mm - motor 7.5 KW  Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW  Fitting spindle pneum. clocked 40 x 160 mm - motor 3 KW  Saw/groove spindle horizontal top, pneum. clocked - motor 3 KW  Feed adjustable from 6-12 m/min. - Motor 1.1 KW  Screen control for 99 window types  Support strip for rung production pneum. Timed  Studio window setup with digital angle display  Length stop up to approx. 3,500 mm  Milling device with support rail  Return transport device to the machine operator  Machine complete with operating instructions, circuit diagrams, spa ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm # 6726 Weinig Unicontrol 12 CNC -------------------------------------------------------- Sale on behalf of a customer. Machine connected and ready for demonstration. crosscut saw -------------------------------------------------------- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate -------------------------------------------------------- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm -------------------------------------------------------- 1. tenoning Spindle ---------------------- ...

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

Very well preserved, rarely used grinding machine Weinig Tyo RONDAMAT R 980 for planer heads

Washing machine for planer heads Weinig type MTS Very good condition. Fully operational with Simatic OP 7 controller. Operator's manual. Machine can be taken over immediately.

Key data: 10 , 240 mm

Four-sided planer Weinig Type: Unimat 23 / U 23 Year of manufacture 1994 CE Planing width 240 mm Planing height 160 mm (240 mm universal shaft) With 2 universal shafts 360° clamping length 240 mm Length of dressing table 2350 mm 10 planing shafts Arrangement of planing shafts and table rollers 1.Shaft bottom 7.5kw smooth driven roller in the table 2nd shaft right 7.5 kW 3rd shaft left 7.5 kW 4th shaft right 7.5 kW smooth driven roller in the table 5.Shaft top 7.5 kW 6.Shaft bottom 7.5kw smooth driven roller in the table 7.Shaft top 7.5 kW 8.Shaft bottom 7.5kw smooth driven roller in the table 9.Shaft Universal u, right, li, o 360° 7.5 kW smooth driven roller in the table 10.Shaft Universal u, right, li, o 360° 7.5 kW Smooth driven pull-out roller in the table Spindle diameter 40 mm Cardan feed, feed motor 8.6 kW Feed speed 6 – 36 m/min. Electric he ...

CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details.

Weinig Profimat 23 ATS four-sided planer Working width 230mm Working height 120mm Number of spindles 4 Spindle layout: 11kw pit Rights Left 11kw Top 11kw Pneumatic Material Clamps Feed speed adjustable 5-22m/min Input table length 2470mm 4kw feed motor CE Certificate Lashing diameter 4x140mm Net price

Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2500 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2-12 m/min. weight of the machine ca.: 2500 kg 1 WEINIG VARIOMAT Planing and Moulding Machine --------------------------------------- Brief Summary: --------------------------------------- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturers Description: --------------------------------------- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom --------------------------------------- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right --- ...

Part number 7994 SPECIFICATIONS - max width of the workpiece 230mm - max workpiece height 130mm 7 spindle: 1) horizontal bottom 230mm 4kW 2) Vertical right 130mm 3) Vertical left 130mm (2 and 3 spindle) 11kW 4) Horizontal top 230mm 5.5kW 5) horizontal top 230mm 5.5kW 4 & 5 Spindle Electrically Adjustable Up/Down 6) horizontal bottom 230mm 4kw 7) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling input rollers from above - 4 leading, pulling, rubber, smooth shafts from above, including 3 double - metal pulling roller at the bottom - feed on cardan shafts - pneumatically pressed rollers - infinitely variable feed speed control on the inverter - 3kW feed motor - working pressure 6-10bar - Electric planing thickness setting - central lubrication of the table top - length of the introductory tab ...

Tenoning spindle: 2 Stk. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----------------------------------------- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturers Technical Description: ----------------------------------------- Item 1: Weinig Unicontrol 10 NC Window System ----------------------------------------- Cross-cut Saw -------------------------------------------------------------- with laser alignment light, motor power: 3 kW, spindle diameter: 40 mm, spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom roundin ...

This 5-spindles WEINIG DIMTER PROFIMAT 23 E was manufactured in 1998. It features a working width of 230 mm and a working height range of 8-120 mm. The machine operates at a spindle speed of 6000 rpm and has a feed rate of 5-24 m/min. If you are looking to get high-quality wood planning capabilities, consider the WEINIG DIMTER PROFIMAT 23 E machine we have for sale. Contact us for further details.

Automatic planing and moulding machine WEINIG Powermat 700 Year of construction 2023 Tool arrangement (u-r-l-o-u) 1. Spindle bottom 11 Kw 6,000 rpm 2nd spindle right 11 Kw 7,000 rpm 3. Spindle left together with right spindle driven 7,000 rpm 4. Spindle top 15 Kw 7,000 rpm 5. Spindle bottom 15 Kw 8,000 rpm Feed rate 5 Kw Feed speed infinitely variable 5 - 40 m/min Total connection 60 Kw

Key data: 5 , 230 mm, 120 mm

5-spindles automatic planer with grooved table WEINIG PROFIMAT 23 E with grooved plane ( removable ) second hand machine n.5 spindles working condition : Excellent CE mark : Yes volt. 380/50 grooved plane ( removable ) with tools : Yes , as in photos Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 10 ( Kw 7,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved plane ( removable ) Technical details : forward motor power Hp 4 ( Kw 3 ) spindle rotation speed rpm 6000 feed speed : from 5 to 24 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system electric height adjustment set of service keys / documentat ...