weiler lathes used for sale

Key data: 250 mm, 1000 mm, 380 mm

Hamlet of Commodor AC (Constant cutting speed) Year of construction 2004 Machine no. 3634 Circumferential diameter over bed 380mm Circulation diameter over face carriage 190mm Nominal power 5.5kW Spindle speeds 13-2000 rpm Spindle passage 56mm Center width 1000mm Tailstock MK4 Feed force 10kN Accessories/Equipment: - Three-jaw lathe chuck 200mm - Swivel jaws stepped inside and outside - Multifix B base holder incl. 2 tool holders - Coolant device - 3 axis digital display (hamlet) - Constant cutting speed -Operating instructions - Fixed and rotating bezel - Electrically locked chuck guard - Emergency stop - Multiple bed stops The machine has been technically tested and is in very good condition. The geometry was also checked and found to be very good (measured by the flat web layout) Reversal clearance face carriage 0.15mm Backlash upper slid ...

This WEILER E 40 x 1000 was manufactured in 2012. It features a centre distance of 1000mm, a circulation diameter in the bed of 435mm, and a spindle bore of 66mm. The machine has a speed range of 1-3,500rpm and weighs 3400kg. This opportunity to buy the WEILER E 40 x 1000 lathe could be ideal for a variety of turning applications. Contact us for further details regarding this lathe.

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik SL 1 cycle control Year of construction: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation O above bed : 435 mm Circulation O over face slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 4-fold PARAT tool holder 20 PARAT tool holders 3 jaw chucks RÖHM Duro T 200 1 pc Rotating Lynette 0 160 mm Tailstock with extendable drill quill Coolant device Chip drip tray Operating instructions

Key data: 1500 mm, 3000 mm

Control: CNC Weiler (based on Siemens Sinumerik 840 D) Turning length: 3,000 mm Turning diameter: 1500 mm Spindle bore: 165 mm Sledge travel: 790 mm Upper slide: 250 mm Spindle speed: 1 – 1120 /2 steps Tailstock quill mount: MK 6 Tailstock adjustment: 3,000 mm Swivelling C-axis, chip conveyor, clamping cylinder with clamping hydraulics, extraction system, machine platform

Key data: 330 mm, 750 mm, 160 mm

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 Kg, under power

Key data: 330 mm, 750 mm

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 Kg, under power

Accessories: -Three-jaw Chuck -Steel holder multi fix A -Lamp -Coolant Technical data: Tip height 120 mm Top width 450 mm Spindle passage 23 mm Spindle inner taper MK 4 Plan travel 150 mm Tailstock MK 2 Quill way 80 mm Manual 9 levels Speed range 2 travel of bolt turn 30 3000 rpm

-Röhm three jaw Chuck ø 160 mm -Steel holder multi fix A -div. collets -Fixed bezel -Revolving bezel -Chuck -Nivelierelemente Technical data: Tip height 140 mm Top width 500 mm Spindle bore 38 mm Spindle speeds 15-3550 RPM. Machine weight approx. 750 kg

Description Steel holder Multifix type: B Plexiglass Chuck guard Three-jaw Chuck ø 200 mm Live Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)

Description Steel holder Multifix type: B Plexiglass Chuck guard Four-jaw Chuck Face plate ø 300 mm Live Fixed bezel Various gears Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)

Tip height 180 mm Top width 800 mm Turning diameter over bed max. 380 mm Turning diameter over slide to 190 mm Spindle bore 56 mm 13 speed 2000 RPM 7.5 kW Weight 1500 kg

Weighing fraesing machine WEILER FHP750, table 750 / 200 mm, 550 / 180 / 400 mm

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Running bezel of a hamlet E110 The bezel is almost unsubstonible

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: 250 mm centre height: 125 mm turning speeds: 1800 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with 6-hole turret acc.: various collets for turret The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2000 mm control: Siemens Sinumerik 805 turning diameter over slide: 430 mm bed width: 480 mm engine output: 27/22 kW spindle head: DIN 55027 Gr. 11 spindle bore: 106 mm speeds: 1 - 1800 U/min Power: 28 KW current capacity: 42 kVA workpiece weight max.: 3800 kg weight of the machine ca.: 5,2 t dimensions of the machine ca.: 4,0 x 2,0 x 1,9 m 2018 Check of the Main Gear Box and change of parts like Bearing, Gears etc CNC control Siemens Sinumerik 805 - 1 Steady 400mm - 1 chuck 400mm - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Weiler W2 hollow: 280 mm centre height: 440 mm bed width: 320 mm weight of the machine ca.: 200 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 110 mm turning length: 350 mm center height over bed: 125 mm centre distance: 350 mm bed width: 170 mm spindle bore: 24 mm turning speed range: 440 - 3600 U/min voltage: 380 V weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,25 x 0,55 x 1,25 m - revolver 5-fold - Collet equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm spindle bore: 38 mm tailstock quill taper MT: 3 spindle turning speed - stepless: 24 - 2800 U/min linear traverse of table: 0,026 - 1,253 mm feeds crossrail-slide horizontal: 0,013 - 0,628 mm/U quill stroke: 120 mm total power requirement: 2,4 / 3,0 kW weight of the machine ca.: 850 kg dimensions of the machine ca.: 1,85 x 0,8 x 1,7 m 3-jaw chuck: Qick Toolholders: Machine Lamp: chip protection wall: Lining protection hood: Coolant System: The machine comes from a training company and was maintained more than needed. The general condition is very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 155 mm turning diameter in the gap: 350 mm turning length: 800 mm turning speeds: 26 - 2000 U/min spindle bore: 24 mm connected load: 1,6 kW weight of the machine ca.: 0,7 t dimensions: 1,55 x 0,8 x 1,3 m Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: E 30 Parameters: Manufacturer: Weiler Year of production / SO / GO: 2018 / - / - Description: Lathe in good technical condition, after agreement the possibility of testing. Maximum turning length (Z axis) 750 mm. Turning diameter above the bed (max) 330 mm. Maximum rotation speed of the main spindle 4500 1 / min. Total power consumption 15 kW. Lathe weight 1.7 t.

It is a Weiler Commodor lathe, turning diameter 308 mm, above the support 190 mm, turning length 1000 mm, spindle 56 mm, tailstock MK4, motor 4 kW, 1600 kg, dimensions 2700 x 1500 x 1800, brand new quick clamping head 1 piece, new knife holders 10 pieces, knives + discs, drills etc.

turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: . Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,300 mm, weight approx.: 250 kg

centre height: 165 mm centre distance: 750 mm spindle bore: 40 mm tailstock taper MT: 3 weight of the machine ca.: 1150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 165 mm centre distance: 750 mm spindle bore: 40 mm tailstock taper MT: 3 weight of the machine ca.: 1150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description WEILER flatbed lathe E70/2 Good general condition, geometry fine. Equipped with Forcardt lining, incl. lynettes. Details Machine No. 48° Year of construction 1995 Operating voltage 400 V Control voltage 24 / 230 V Connected load 28 kW Rated current 45 A Frequency 50 Hz NUM Control

Key data: 570 mm, 1000 mm

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

Lathe Weiler E35 Year of construction: 1997 Center height: 200 mm Distance between centers: 950 mm max. turning length 950 mm maximum turning diameter over bed 410mm maximum turning diameter over face slides 200 mm max. workpiece weight 900 kg Complete with documentation and many accessories, see photos

This machine comes from a training workshop. Technically, the machine is fully functional and in a well-maintained condition.

Swing over bed/ slide: 260/ 140mm, length: 1250mm, width: 550mm, height: 1200mm, weight: 370kg.

Length: 1800mm, width: 1000mm, height: 1800mm, weight: 800kg, the top slide of the machine is defective.

turning diameter over bed: 280 mm turning diameter over slide rest: 158 mm turning length: 650 mm turning speed range: 96 - 2500 U/min feeds - longitudinal: 0,02 - 0,63 mm/U feeds - cross: 0,32 x Längsvorschub mm/U 3-jaw-chuck diameter: max.165 mm total power requirement: ca. 2 kW 88140984 380 V - 50 Hz colour: green accessories: set of collets (59 units), multifix tool holder Size A with 6 inlets, 1 punch point - revolving, 2 punch points - fix, 1 boring chuck, 1 turning heart, 1 chuck for three jaws, 1 chuck for four jaws, 5 set of jaws. The machine was equipped afterwards with a 3-axis digital monitoring from RSF in our workshop. #The machine is in a condition as new# The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm centre height: 155 mm centre distance: 800 mm spindle bore: 38 mm spindle turning speed range: 24 - 2800 U/min spindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,026 - 1,253 mm/U feeds - cross: 0,013 - 0,628 mm/U dia. of leadscrew: 24 mm lead of leadscrew: 6 mm tailstock taper MT: 3 tailstock quill stroke: 110 mm total power requirement: 3 kW weight of the machine ca.: 800 kg dimensions of machine L x W x H: 1,80 x 0,70 x 1,23 m Accessories: 3-jaw chuck RÖHM 160 mmø, changing tool post PARAT, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock-No. 1105-0388994 Type of machine CNC Lathe Make WEILER Type 200 CNC Year of manufacture 1992 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis ex location, not dismanteled Technical details turning diameter 450 mm turning length 925 mm control SIEMENS 810 T center height over square guideway 245 mm turning length between centers 500 mm longitudinal bed slide 925 mm Cross travel of cross slide 250 mm swing diameter max. over bed cover 420 mm Swing over the cover of the tailstock slide guide 350 mm total power requirement 25 kW Additional information 12-FOLD REVOLVER SPINDLE 5000 RPM 19 KW POWER SPINDLE PASSAGE 42 MM

Weiler Nachlathe (could be a hamlet FDU260) Converted with speed switching for thread cutting incl. hand lever cross support

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm centre height: 155 mm centre distance: 800 mm spindle bore: 38 mm spindle turning speed range: 24 - 2800 U/min spindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,026 - 1,253 mm/U feeds - cross: 0,013 - 0,628 mm/U dia. of leadscrew: 24 mm lead of leadscrew: 6 mm tailstock taper MT: 3 tailstock quill stroke: 110 mm total power requirement: 3 kW weight of the machine ca.: 800 kg dimensions of machine L x W x H: 1,88 x 0,87 x 1,32 m Accessories: 3-jaw chuck RÖHM 160 mmø, changing tool post TRIPAN with various inserts, collet fixture with various collets, solid steady, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg range L-W-H: 2320 x 1400 x 1600 mm Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis HEIDENHAIN digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel h ...

control: WEILER turning diameter over bed: 410 mm centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 200 mm spindle bore: 54 mm spindle taper ISO: 55027/6 spindle turning speed - stepless: 4-3000 U/min tailstock quill taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm feed - longitudinal/cross: 0-20 mm/min rapid traverse longitudinal and cross: 10/5 m/min spindle drive: 9/13 kW dimensions of machine: 2300x1200x1800 mm weight: 2.0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weiler automatic lathe UD 24 CNC Siemens 820T P1 65574 P2 28618 380 V 11,25 KW Without tailstock Hydraulic feed and clamping Accessories

Weiler automatic lathe UD 240CNC Bosch CC200T 270 mm length max Swing 190 mm Passage 24 mm rod Pneumatic clamping 8 tool slots Speed 5000 rpm Center height 130 mm P1 25563 hrs P2 1044266 h Power: 11.25 KW Rod magazine Collets Cheek chuck

Control: Manufacture: WEILER turning dia. over bed: 330 mm centre height: 165 mm centre distance: 770 mm turning dia. over face-slide: 160 mm spindle bore: 42 mm spindle taper: 55027/5 spindle turning speed - stepless: 1-4500 U/min tailstock quill taper MT: 3 dia. of quill: 50 mm quill stroke: 110 mm feed - longitudinal/cross: 0.001-20 mm/min rapid traverse longitudinal: 10 m/min rapid traverse cross: 5 m/min spindle drive: 9/11 kW dimensions of the machine ca.: 1800x1200x1700 mmxmmxmm weight: 1300 kg 3-jaw-chuck diameter: 160 mm make: FORKKARDT quick change tool holder:: MULTIFIX type: B numbers of toolholders: 6 coolant: misc. accessories: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.