weiler 160 used for sale

Key data: 318 t, 318

Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1300 Belt width in mm: 1100 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive  ...

Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws -Clamping jaws: 2 pieces ground steel jaws width 160 mm -Hole spacing: 100 mm / Ø 11 mm -Shipping/Price: complete -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg

HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center weight approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 762 mm - maximum workpiece weight: 4536 kg - maximum spindle rotational spee ...

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LA766-4AA60-ZN00 160L -Power: 15 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Dimensions: 590/315/H360 mm -Weight: 83 kg

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 360 mm stroke: 500 mm table surface area: 1250x630 mm ram surface: 1000x450 mm table height: 1000 mm dayligth: 800 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg

Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 089 746 84 KB 160 RIW -Dimensions: see photos -Dimensions: Ø 275 x 40 mm -Weight: 1.0 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Feed flange: mounting flange -Outside: Ø 160 mm -Recess: Ø 130 mm -Hole: Ø 25 mm -Bolt circle: Ø 139 x 10 mm -Dimensions: Ø 160 x 40 mm -Weight: 2.6 kg

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Conveyor belt rollers, transport rollers, roller conveyor, carrying rollers, roller block -Roller block: with 4 polyamide rollers, diameter 32 mm -Rollers: 4x Ø 75 x 40 mm -Transport width: 160 mm, adjustable, see photos -Shaft: Ø 25 mm, supported on both sides -Dimensions: 350/75/H130 mm -Weight: 6.2 kg

Square, locksmith square, hair square, precision hair square -Angle stop: Leg length 250 x 160 mm -Quantity: 1x angle stop available -Dimensions: 255/160/H22 mm -Weight: 0.5 kg

Hydraulic vise, machine vise, NC compact clamp -Handover in its current condition as inspected The vise has no spindle and is therefore sold as a source of spare parts. -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

electric motor, three-phase motor -Power: 13/17 kW -Speed: 1470/2950 rpm -Shaft: Ø 42 mm -Design: B5 -Protection class: IP 54 -Dimensions: 620/350/H400 mm -Number: 3x motors available Price: per piece -Weight: 130 kg

Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 150 mm -Clamping depth: max. 160 mm -Dimensions: 500/270/H170 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 190 mm -Clamping depth: max. 160 mm -Dimensions: 630/200/H160 mm -Weight: 55 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

end mill, end mill, milling cutter -Outer diameter: 160 mm -Teeth: 16 -needs to be reground -Weight: 10 kg

Rolling jaws, floating center jaws, low-profile jaws -Dimensions: 160/31/H63 mm -Weight: 3 kg

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available -Dimensions: 83/83/H165 mm -Weight: 0.6 kg

ON 17.12.25, A FULL AUDIT OF THE MACHINE WAS CARRIED OUT BY THE MANUFACTURER'S SERVICE Report available WORKING HOURS: 80H (START-UP ONLY) PRICE OF A NEW MACHINE: 7,500,000 EURO • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 •Year of manufacture: 2020/ first commissioning year 2021 • Last operation: 2022 Specifications • Working width: 1600 mm • Suitable material: Polypropylene (PP), MFI 230 /2.16 > 400 g/10 min • Capacity: Up to 65 kg/h per meter of width • Product weight: 10-80 g/m² • Production speed: 5-80m/min • Nozzle head: MB 1600, 50 h/inch • Extruder: RT-1101-1-100, L/D 30 • Rotary beam heating power: 65-172 kW • Winding station: contact winding machine with automatic coil change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tens ...

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 35 mm -Groove: 20 x 60 mm -Dimensions: 275/160/H308 mm -Weight: 28.6 kg

electric motor, three-phase motor -Engine: unused -Power: 18.5 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Design: B3/B5 -Protection class: IP 55 -Quantity: 9 pieces available -Price: per piece -Weight: 110 kg/piece

Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Measuring range: 160-295 mm -Dimensions: 200/485/H135 mm -Weight 4 kg

PART NUMBER 7948 Specifications: - track width 400mm - shaft working width 400mm - max disc diameter (350mm fitted) 450mm - blade bore diameter 70mm - max cutting height (with a blade of 450mm) 160mm - Table top width with widening 710mm - table top length 1900mm -in advance: - 2-row ratchets/flasks - Slip roller, metal, pressure roller - Ratchets/Fluffers - Slip roller, metal, pressure roller - shaft with saws - Smooth, metal, sliding roller -from the bottom: - guide strip - latches - Caterpillar - Electric body lift - central track lubrication - 2 types of feed speed + smooth - total power 32kW - overall dimensions l/w/h 2050x1800x1530mm - weight about 2000kg ADVANTAGES: – Italian production – very good condition – DTR documentation – used multi-saw Net price: 48900 PLN Net price: 11643 EUR depending on the price 4.20 EUR (Prices may c ...

NUMER KATALOGOWY 7904 Dane techniczne: - max wysokość cięcia 160mm - max szerokość elementu 700mm - szerokość robocza wału z piłami 600mm - średnica wału 70mm - max średnica piły 450mm - z góry: - zapadki - 2 wały ciągnące, zębate - docisk z rolka metalową poślizgową - z dołu: - rolka poślizgowa - zapadki - wał ciągnący zębaty - wał z piłami - wał ciągnący, gładki - rolka poślizgowa metalowa - płynna regulacja prędkości posuwu - silnik posuwu 1,5kW - silnik główny 55kW - wymiary całkowite dł/szer/wys 1700x1400x1900mm - waga około 2740kg ATUTY – produkcji polskiej – solidna konstrukcja – maszyna używana, stan bardzo dobry Cena netto: 56900 PLN Cena netto: 13548 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

• Reference ID: PP-59393 • Category: Flexo Printer • Manufacturer: Bobst • Model: SPO 1600 / Flexo 160 • Year Built: 1988 • Colors: 2 • Speed: 6,000 sheets/hour • Max. size: 1,600 x 1,100 mm • Min. size: 600 x 520 mm • Condition: Good • Location: Europe • Availability: Immediately Machine Description: • SERCO Feedmaster Prefeeder • BOBST Flexo 160 – 2 Colour Printing Units • Conveyor • BOBST Autoboard SPO 1600 Die Cutter Technical Specifications: • Maximum Sheet Size: 1,600 x 1,100 mm • Minimum Sheet Size: 600 x 520 mm • Maximum Cutting Force: 400 Tons / 4 MN • Maximum Speed: Up to 6,000 Sheets/Hour • Suitable for Corrugated Board Production • Heavy-Duty Swiss Construction • The equipment is currently installed and in production, allowing inspection under power and production testing.

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector -Manufacturer: wöhner, fuse-switch disconnector, 160 A, unused, original packaging -Type: LTS-00 -Quantity: 1x load break switch available -Carton dimensions: 200/105/H125 mm -Weight: 1.3 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Weber Silas, fuse-switch disconnector, circuit breaker 160 A -Type: STL-00 -Number: 2x load break switches available -Price: per piece -Dimensions: 190/105/H80 mm -Weight: 0.6 kg/piece

DECKEL MAHO DMU 160P duoBLOCK CNC Machining Center TECHNICAL FEATURES: Year: 2008 CNC Type: HEIDENHAIN TNC 530 Number of continuous axes: 5 X-axis stroke: 1600 [mm] Y-axis travel: 1250 [mm] Z-axis travel: 1000 [mm] X, Y and Z axis travel speed: 15000 [mm/min] Fast travel speed X, Y and Z: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Maximum weight Tabletop Allowable: 4000 [Kg] Pin attachment: SK 40 (DIN 69871) Minimum speed. Spindle: 20 [rpm] Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 60 Machine weight: 35000 [Kg] EQUIPMENT INCLUDED: x1 HEIDENHAIN workpiece probe x1 Laser Gauge x3 HEIDENHAIN measuring rulers on the X, Y and Z axes x1 Watering Center Spindle x1 Chip Conveyor x1 Paper Filtration Unit More information on request.

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: 125 liter fuel tank capacity; Water Tank Volume [l]: 125

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 128 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 160 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 230.9 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/volvo-td710g-generator-160kva- used/389, , = More information =, , Empty weight: 2.030 kg, Type number: TD710G GENERATOR 160KVA

Automatic Transfer Switch - ATS Panel - ATI Panel, 160 Ampere - Applicable for generators up to 110 kVA; Gross weight [kg]: 60; Registration Number: 3

Flywheel size: SAE3/11.5; Gross weight [kg]: 594

Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring for conical brake disc, unused -Type: 089 746 84 KB 160 RIW -Dimensions: see photos -Dimensions: Ø 278 x 35 mm -Weight: 1.0 kg

Engine Brand: DAF, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 116 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 160 , Generator Hz: 50 , Generator Volts: 380/220 , Generator Amps: 243 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/daf-dk1160mg-generator-160kva- used/321, , = More information =, , Empty weight: 1.760 kg, Type number: DK1160MG GENERATOR 160KVA

; Gross weight [kg]: 3651; Engine: Perkins 1206J-E70TTAG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 822