weight filler used for sale

Slot weights, commercial weights, test weights PAGUS 250 g brass set 4 pcs. accuracy: M3 diameter Ø 50 mm Dimension: 50 x 50 x 72 mm

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight roll: 12.0 kg

Rear weight, forklift weight -Manufacturer: Clark, rear weight from forklift type C500-Y80 -Recording/Dimensions: see photos -Dimensions: 1275/570/H940 mm -Weight: 1405 kg

Slotted Weight Support Bar, Commercial Weights, Test Weights PAGUS 500 g Beam Bar + 10 pcs Slotted Weights Brass a 500 g Accuracy: M3 Diameter Ø 90 mm Dimensions: 90 x 90 x 410 mm

Slot weights, commercial weights, test weights PAGUS 100 g brass set 5 pcs. Accuracy: presumably M3 diameter Ø 33 mm Dimensions: 33 x 33 x 68 mm

Rear weight, forklift weight -Manufacturer: Clark, tail weight -Recording/Dimensions: see photos -Transport dimensions: 1110/1000/H650 mm -Weight: 1900 kg

Balance weight, wheel weights, balancing weights -25g -30g -40g -50g -60g -100 g -200 g -Complete sale -Weight: 24kg

Slot Weight Carrier Bar, Commercial Weights, Test Weights PAGUS 250 g Beam Bar + 14 pcs Brass Slot Weights a 250 g Accuracy: M3 Diameter Ø 50 mm Dimension: 50 x 50 x 810 mm

Slot Weight Beam Bar, Commercial Weights, Test Weights PAGUS 100 g Beam Bar + 20 pcs Brass Slot Weights a 100 g Accuracy: presumably M3 diameter 33 mm Bore of weights: Ø 8 mm Slot of weights: 6 mm Carrier rod: Ø top 6 bottom 7 mm Dimensions: 33 x 33 x 710 mm

wire electrode, welding wire, welding wire -Manufacturer: Elgar, started roll of MAG wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300/100 mm -Weight roll: 10.1 kg

Equipped with three-point design and towing eye Auction-ID: A1-50597-184

Consisting of 2 parts, including 500KG. Equipped with three-point fitting. Auction-ID: A1-50597-185

Consisting of 16x100KG and mother block Auction-ID: A1-50597-186

Equipped with three-point interior and towing eye. Auction-ID: A1-50597-176

Auction-ID: A3-46111-5792

Auction-ID: A1-51150-159

Auction-ID: A1-51150-160

Auction-ID: A1-51150-158

Auction-ID: A1-51150-58

Auction-ID: A1-51150-47

Weight: approx. 500kg ; Auction-ID: A1-51150-65

2x 600 kg, Auction-ID: A1-47396-703

Stock number: F936, In stock: Yes, Amount in stock: 1 pc., Item: Sliding-weight balance, Construction: Weighing plate L 1570 x W 1800 x H 230 mm, Outer dimensions: L 1570 x W 2000 x H 1150 mm, Weighing area: 1-2.000 kg, Interval: 1,0 kg

Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece

Set of 12 E2 weights from 1 g to 500 g - ZWIEBEL New equipment in its original packaging Type: COFRAC weight series Class: Class E2 Weight: 1g / 2g / 5g / 10g / 20g / 50g / 100g / 200g / 500g Weight Material: Cobalt Alloy / Stainless Steel With wooden box

Technical Specifications & Performance Data The New Bottle Inspector Weight Checking Inspections Unit with Rejection Piston is an inline, high-throughput solution engineered for precise mass verification of individual packages without stopping product flow. Purpose-built for beverage production and industrial packaging environments, it delivers reliable, non-contact rejection for out-of-tolerance items, ensuring consistent quality and regulatory compliance. Application: Inline dynamic weight control with automatic reject piston Maximum speed: up to 11,000 bph (bottles/packs per hour) Inspection type: 2 (dual-threshold underweight/overweight logic) Containers: Brik cartons and cans (aluminum tins/cans) Conveying architecture: multi-conveyor configuration (4 conveyors) for stable weighing and controlled reject Operation: Simultaneous weighing without line stoppage; positive push-off reject ...

WEIGHT TRANSMITTER DGTQ BRAND DINI ARGEO 12-24VDC Location: F7 Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

Wire electrode, welding wire, MAG welding wire, shielding gas wire electrode -Manufacturer: WDI Westfälische Drahtindustrie, protective gas wire electrode -Type: HO2 Ø 1.2 mm DIN EN ISO 14341-AG 42 4 M21 3Si1 -Application: Metal inert gas welding of unalloyed and low-alloy steels -Quantity: 62 pieces -Price: per piece / from 3 pieces €35.- -Cardboard dimensions: 310/300/H110 mm -Weight of roller: 15.5 kg

Partly new from Wirth / Hachenbach / Osborn, 3 degrees, 4 degrees, 10 degrees and other stock 12 to 20mm Auction-ID: A7-51245-54

Auction-ID: A7-51245-58

Toyota Land Cruiser 3.0 D-4D 4x4 automatic – 2003 – 567,790 km – 3,500 kg towing weight Specifications: Brand: Toyota Model: Land Cruiser Year of construction / first admission: 2003 Odometer reading: 567,790 km Transmission: automatic Drive: 4x4 Tare weight: 2.010 kg Maximum towing weight: 3,500 kg braked Features: 5-door off-road vehicle Automatic transmission All-wheel drive Roof rails Running boards Tinted rear windows Alloy wheels, black All-terrain tires Particularities: Vehicle drives, runs and shifts well. MOT valid until 02-2027. PLEASE NOTE: this vehicle has a license plate registration. NL registration: 48-BJ-VN. Upon collection, the vehicle must be registered with a third party on site or exported. There are additional costs associated with this. Auction-ID: A1-47423-2225

Boxilla AV / IT Manager see photos. Auction-ID: A7-51245-114

Brand: ZIVA Model: Rack and set of 10 urethane loaded bars from 10 to 40 kg Type: Free weights Condition: correct condition / rust / some signs of wear Dimensions: Length 120 cm Auction-ID: A1-50612-1

And various including hammer, screws Auction-ID: A1-50663-1619

Equipped with three-point fitting. Consisting of 18x 45KG, center block with towing eye and trestle. Auction-ID: A1-50597-183

Auction-ID: A1-51150-42

Beer filler with KK

Pastry filler / doughnut filler with 1 plunger NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries5 liter bowl with lid made of stainless steel Details see picture

Pastry Filler / Berlin Filler with 2 Pistons NEW! Pastry filler / doughnut filler with 2 plungers for filling doughnuts or pastries7 liter bowl with lid made of stainless steel Details see picture

Pastry filler / doughnut filler with 1 plunger NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries5 liter bowl with lid made of stainless steel Details see picture

Year: 1989 Type: Monoblok VKVCF 72/12 Bottle type: 0,5l glass Efficiency: 28500 b/h Operation mode: pressure Technical data: -72 filling valves -12 crowning heads -double evacuation -vaccum pump

110 Valves, Division of 100 mm, with SV. Bu. 1995

Handtmann VF 80 vacuum filling machine, filling, portioning, linking. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

Producer: Handtmann Type: VF 50/80 Output: 4 kW Weight: 450 kg Dimensions: Width 525 x length 844 x height 1600 mm Connection: 400V/50 Hz Vacuum filler HANDTMANN typ VF 50/80 - Without loading - MC control - Serving setting from 5 g to 1000 g - Filling pressure up to 55 bar - Portion and turn up to 420 portions / minute - Without calibration gear and without intestinal clamp - Capacity up to 2.600 kg / h - Funnel 80 L Portioning speed: 25 g = 420 portions / minute 50 g = 350 portions / minute 100 g = 250 portions / minute 200 g = 160 portions / minute Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Manufacturer: Nagema . fountain pen Varifill 110/15 regulation: Glass. construction year: In 1995 Type: Monoblok 110/15 technical data: To -110 filling valves to-15-figure Kronenkorker - run direction: left on the right -Doppel-Evakuierung control: Siemens S5

Piston filler with 10 filling points for filling viscous/viscous products in glasses or bottles with bottle mouths from 28 to 38mm Up to a maximum of 0.75ltr

Delivery time: 2 weeks Length: 350 mm Width: 470mm Height: 480 mm Capacity: 8 litres Weight: 20 kg Kw: 0.1 Operating instructions: german Description Pastry filler of manufacturer IZO is an electrical machine for dosing and injection of cream and jam. The machine is designed for professional use in bakeries and pastry shops. -Digital Control Panel - cooler - automatic time dosage

New BIG BAG filling station The device is available immediately from stock. Technical data: Weight: 160 kg Dimensions: 1400 x 1640 x 1960 mm (L x W x H) Maximum dimensions of the big bag's: 1000 x 1400 x 1500 mm (L x W x H) Technical data sheet, see the images on offer. At smaller big bag can be inter's pallets.

New BIG BAG filling station The device is available immediately from stock. Technical data: -Weight: 320 kg -up to 1.5 qbm big bags can be used. -Foldable feet -With EXTRA large funnel to the trucks/excavators filling -Dimensions: 1520 x 1640 (L x W) mm Retracted height feet: 2560 mm Extended height feet: 3060 mm -Hopper opening: 1400 x 1100 mm Technical data sheet, see the images on offer.