129,238 used machines on RESALE, but how to find them? Machine Search
Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition
White temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test room volume: 500 ltr. Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of construction: 1990 Condition: used Complete plant closure, large selection of mezzanine, pallet racks, shelve ...
Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.
White Temperature Chamber Here we offer a white temperature chamber. White temperature chamber water-cooled Temperature range: from - 70°C to 180°C Temperature change rate cooling 10 K/min Temperature change rate heating 10.0 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ± 2.0 K Test room dimensions: width 580 mm x depth 615 mm x height 750 mm Housing dimensions: width 895 mm x depth 2080 mm x height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW Rated current 26 A Refrigerant: R-404A R-23 Weight: approx. 450 kg Control panel has been updated to a 24 volt version Type: WT11-270/70/10 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with le ...
White temperature cabinet Here we offer a white temperature cabinet. Air-cooled White temperature cabinet with S! MCON / 32 controller Test room capacity : approx. 195 litres Test room dimensions: height 750 mm, width 580 mm, depth 450 mm, External dimensions: height 1775 mm, width 870 mm, depth 1600 mm, Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation temporally in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant: R404 A 2.5 kg Gwicht : 490kg Type: WT3 - 180/40 For you as a buyer for security the following information! The following points are ...
Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft
Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mm fully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good
We offer here a climate test chamber from Weiss with Feucht! The climate test chamber was only serviced by Weiss/Vötsch in Dec, 2020 and has the test sticker until Dec. 2021! All tests were carried out, another test run was carried out in our company, the humidity and temperature were checked with calibrated test equipment. The climate test chamber has been subjected to an annual inspection and is in a perfect condition! The logbook is attached WHITE 1500SB/010JU/40DU Temperature range -40°C - +180°C Humidity 15%- 95% Air conditioning: +10°C - +95°C Pihyv Test room: 1500 liters Internal dimensions: 1490 mm deep, 1100mm wide, 945mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2,00kg Cabinet has no feet and stands stably on a frame If you have any further questions, please do not hesitate to contact us
Technical data: -max load capacity 300 kg -maximum clamping diameter approx. 1500 mm -Chuck diameter 300 mm -Bore hollow shaft approx. 60 mm -Rotation Electr. infinitely variable - right - + links - course -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 800 x 1150 x D 700 mm -Weight approx. 500 kg
new
Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...
Specifications: Manufacturer: Weisser Type: Univertor AM-1L Year of Make: 2020 Control: CNC control Siemens SINUMERIK 840D sl Travels: X 1,700 mm Z 500 mm Spindle unit left side of the machine Speed Limit| 3,500 rpm Rated speed: 780 rpm Torque: 430/610 Nm (100/40% ED) Spindle bearing Ø: 120 mm Spindle flange: A8 according to DIN 55026 Dressing unit Max. speed: 16,000 rpm Dressing disc holder Ø: 40 x 10 mm Revolver Target turret: 12-speed Drive: electric swivel drive Internal grinding spindle with grinding software Tool holder: D28/43 (thread M28x2) Spindle bearing Ø: 45 mm in hybrid version Speed limit: 45,000 rpm. Rated speed: 30,000 rpm Drive power: 15/18 kw (100/60 % ED) Torque| 4.7/5.7 Nm (100/60% DC) External grinding spindle with grinding software Tool holder taper: 1:10; Ø 73 mm Spindle bearing Ø: 80 mm in hybrid version Speed limit: 6,00 ...
Mobile container heating system Year of construction 2023 Original price: 178.500,- € gross Boiler Buderus GE615 Power: approx. 511–570 kW Burner Weishaupt WM-L10/3-A Monarch Oil burner (tbsp heating oil) Regulation Buderus Logamatic 5311 Other components Two large heating buffer tanks Chimney outside Hydraulics complete in the container Connection cables for heating network Location of the machine: 76661 Philippsburg The facility can be visited on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!
Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost ...
White 91 Portioning Machine used Hourly capacity approx.: 1400 portions Ejector diameter: 90mm (other plates on request) Strength adjustment via sliding handle at the front Machine with corresponding traces of use and wear, but in good condition neat and quiet run Machine must be thoroughly cleaned before use Video about test run available
Electric motor, three-phase motor -Power: 0.76 kW -Speed: 3000 rpm -Shaft diameter: 14 mm -Construction: B5 -Protection class: - -Dimensions: 285/195/H215 mm -Weight: 10 kg
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Weissenfels, Lever chain hoist 3 ton -Load capacity: 3 tons -Chain length: 4 m -Quantity: 1 piece -Price: per piece -Transport dimensions: 700/300/H210 mm -Weight: 25 kg
Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T
Z-kneader, Year of construction 1970, engines, bearings, gears, gearbox, electrics, overhauled around year 2022. Machine is immediately available and ready for use. Z-Kneader has an electric tilting device.
Device characteristics: Number of bars: 48 per minute. Hopper capacity: 7 litres. Weight: from 10 to 80 g ( depending on the stamp ). Dimensions ( L x W x H ): 500 x 400 x 650 mm. Total weight: 27 kg.
Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)
CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)
Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked
Ref. -No.: 10294 Manufacturer: SCHNEIDER WERKZEUGMASCHINEN Year of construction: 1983 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 27.0175 Weight Of The Machine Ca.: 4 t Turret places: 8 Pcs Turning Diameter: 595 mm Turning Length: 3000 mm Bezel diameter (inside): 240 - 490 mm Further information: Tool turret, with 8 holders, with chip conveyor, approx. 300 mm wide, Belt filter system Mayfran, 2 bezels, 1 x for diam. up to 240 mm, 1 x for diam. until about 490 mm
WEISHAUPT FUEL BURNER - IN WORKING ORDER - LITTLE USED -
Stock # U825V Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to ...
Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation
Weiss WK-1000/70 Climatic test chamber -70 to +180 °C White WK-1000/70 Climatic test chamber 990 litres Climatic chamber -70 to +180 °C with humidity 10 to 98 % Test chamber dimensions: Height 950 mm Width 1100 mm Depth 950 mm More items - new and used - can be found in our shop! International shipping costs on request!
turning diameter: ca. 500 mm swing diameter: ca. 600 mm travel -x axis: ca. 400 mm travel -z axis: ca. 600 mm spindle turning speed range: 2000 U/min spindle drive: 63 kW control: SIEMENS control: SINUMERIK System 3 tool turret: 1 x 12 Pos total power requirement: kW weight of the machine ca.: 9,3 t dimensions of the machine ca.: m - R-version, turret right hand side of 3-jaw chuck - Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weiss SC 1000/+20IU Corrosion Climate Alternating Test Chamber White SC 1000/+20IU down to –20 °C Salt spray chamber More items - new and used - can be found in our shop! International shipping costs on request!
This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. The visible surfaces are made of stainless steel 1.4301 and are brushed (RA
Weiss Air Conditioning Ultraclean ULTRA 55.2 Manufacturer: Weiss Klimatechnik GmbH Device type: Ultraclean, ULTRA 55.2 DXU Year of construction: 2007 Nachheitzer 10.5 kW Cooler: 12.7 kW Humidifier: 3 kg/h Filter class: F7 Supply air flow 2500 m{h ext. pressing 200
Key data: 400 mm
Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets
CNC lathe WEISSER Univertor AS 90L, Maximum clamping diameter: 200 mm, Maximum workpiece diameter: 120 mm, Maximum workpiece length: 400 mm, travel:, X-axis: 280 mm, Z-axis: 500 mm, Siemens Sinumerik control system, 12-station tool turret, With automated loading and unloading
Manufacturer: Weishaupt Type: WM-G20/3-A Number of pieces: 2 pcs. Year of construction 2019 Power: 2000 kW Location: Wuppertal
CNC lathe WEISSER Univertor AS 90L, Maximum clamping diameter: 315 mm, Maximum workpiece diameter: 400 mm, Maximum workpiece length: 150 mm, travel:, X-axis: 400 mm, Z-axis: 280 mm, Siemens Sinumerik control system, 1 attached industrial filter, 12-station tool turret, 1 measuring system Marposs Compact IPC6
Hand Pastry Filler XL with 7 litre hopper Table attachment Filling quantity from 10 to 70g Adjustable Used device as good as new More pastry fillers in stock!
WEISHAUPT RGL 40/2-A BURNER Power: 500 - 3400 kW Available: Immediately Description: - Execution: ZM - Gas Type: N / Category II - Connection Pressure: 100 - 4000 mbar - Heating Oil: EL according to DIN 51 - Oil Throughput: 55 - 286 kg/h The burner burns both natural gas and heating oil. It was in daily use until it was decommissioned. The burner was maintained annually and is fully operational. Find more here - / Contact us at -
Control Other WEISS CNC Tip width [mm] 650 General: Control WEISS CNC Center width 650 mm Center height 200 mm Grinding wheel dimensions 400x60 mm + 500x60 mm Workpiece headstock: Speed 10 -650 rpm Workpiece weight max. 250 (100) kg Grinding diameter max. 390 mm
Burners for Miwe stoves Please take data from the nameplate. Burner removed immediately after the furnace was switched off Burners cleaned and technically checked no guarantee and warranty
Manufacturer: Weiss Spindle Type: 175047 A P=19KW N=1100rpm NMAX=15000RPM Condition: presumably repaired Functional test could not be carried out. From warehouse liquidation. Location: Stuttgart
Manufacturer: Weiss Spindle Type: 175389A Condition: presumably repaired Functional test could not be carried out. From warehouse liquidation. Location: Stuttgart
A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.
- Manufacturer: Weishaupt, - Type: WM - G30/3-A, - Version ZM, - Gas and dual fuel burners for heat supply and industrial plants, - Power 600 - 5700 kW, - Year of construction 2013, - Operating hours 26,600, - Connection pressure: 15 - 500 mbar, - Control voltage 230 V, 50Hz, 10 A, - Mains voltage 400 V, - Electrical power 16.79 kW, - Protection class IP 54, Sliding-stage or modulating power control (ZM):• The power is adjusted glidingly between partial and full load via actuators depending on the heat requirement• The two load points are approached continuously. There is no sudden switching on or off of large amounts of fuel, Weishaupt gas and dual-fuel burners WM 30 are suitable for intermittent operation and continuous operation on:, • Heat generators according to EN 303, • Hot water systems, • Hot water systems, • Steam boiler, • Warm air generators, • Certain process ...
A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available.
grinding diameter: 100 mm grinding length: 400 mm centre height: 100 mm z-axis: 425 mm table speed -stepless-: 0,05 - 5,00 m/min workpiece spindle head rotation speed: 90 - 1.000 U / min. grinding head swivelling: -2 - +30 Grad tailstock quill taper MT: 3 grinding wheel speeds: 1.800 / 2.000 U/min grinding motor: 3,70 kW dimensions of grinding wheel: 350 x 50 x 127 mm total power requirement: 7,00 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Loos International Weishaupt Brenner 1700 L Volume 1500-1630 KW 6 Bar 110 Degree Temp. Year of construction 2003
maximum number of results exceeded
please refine your search
