CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...
Throughfeed Drilling Machine Weeke PKA3 Workpiece length up to 3000mm 6 x 2 drilling units vertical / from below 2 x 2 drilling units horizontal / from left and right side
Key data: 2500 mm, 1000 mm, 80 mm
Weeke BHX 500 with hedgehog buffer in the inlet Hedgehog buffer with 30 buffer places, length overall: 5700 mm Effective width: 2000 mm Manually movable Weeke machining center with one machining support at the top and one at the bottom Insertion table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS min. workpiece length: 200 mm max. workpiece length: 2500 mm min. workpiece width: 70 mm max. workpiece width: 1000 mm min. workpiece thickness: 4 mm max. workpiece thickness: 80 mm max. workpiece stacking: 2 pcs. Machine Configuration: 2V32 HIGH SPEED 7500 Vertical drilling unit arranged in the upper and lower machining support, each with 32 drilling spindles (individually controllable with variable speed range). 2H8X/2Y Horizontal drilling unit arranged in the upper and lower processing support with 10 over Drill spindles can be called up individu ...
Manufacturer: Weeke Model: Profiline ABL 220 Year of Manufacture: 2008 Type of Machine : CNC drilling machine with fitting units CE Certified: Yes Electrical Specifications - Operating Voltage: 400 V / 50 Hz - Power: 24 kW - Current: 50 A - Control Voltage: 24 V DC - Workpiece Dimensions - Length: min. 250 mm / max. 2400 mm - Width: min. 240 mm / max. 850 mm - Thickness: min. 12 mm / max. 60 mm The machine processes rectangular workpieces made of melamine-coated chipboard and similar panel materials. Machine Performance - Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift. - Axis Speeds: - X-axis: 80 m/min - Y-axis: 80 m/min - Z-axis: 20 m/min - Drilling Unit - V18 High Speed 7500 - Configuration: 18-spindle vertical drill unit (CONFIG-V18) - Spindle Speed: 1500 to 7500 rpm (variable speed controlled) - Direction of Rotation: Right / Left - ...
Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008
Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003
Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001
Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007
horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas Dowels: 8 mm x 30 mm, 8 mm x 35 mm Controlls: Powercontrol PC85 with Woodwop software
Process: horizontal drilling - injecting glue - driving dowels 1 drilling and doweling unit, freely programmable Workpiece dimensions: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/ max: 10 / 60 mm Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical pushers Double diaphragm pump 1:1 Dowels: 8 mm x 30 mm, 8 mm x 35 mm Control: Powercontrol PC85T with Woodwop software
Line has got 2 throughfeed drilling machines Weeke 1st drill Weeke BST30/25, N? 0-259-05-3283-01-0810, 1992 Equipment: 2 x hor. Units, split drilling blocks, each with motor 1,8 kW, 13-spindle drilling blocks, centers 32 mm 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm, width 200 up to 800 mm, thickness 12 up to 40 mm 2nd drill Weeke BST30/25, N? 0-259-05-3284, 1992 Equipment: Machine prepared to take 2 horizontal units at later date 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm, ...
X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...
Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -
This 4-axis Weeke Optimat BP 145 was manufactured in 2000. A robust CNC processing center, it offers advanced capabilities for precise and efficient machining. Ideal for those looking to enhance their production with a reliable used machine. Contact us for more information.
This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 Ã 1250 Ã 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine.
This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information.
Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - / Contact us at -
Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992
Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2+ 1, Number of drilling spindles: 18/3, Grid: 25, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999
Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778-33072, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999
Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS02-1-W200-DA01-01-FW, SN Nummer: DDS2.1-W200-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999
Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 269778-3369, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999
Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-W030-RA02-02-FW, SN Nummer: DDS03-1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999
Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS 303.1-W50-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999
Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03. 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999
Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-RA02-02-FW, SN Nummer: DDS03.1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999
Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997
Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-W030-RA01-02-FW, SN Nummer: DD-S 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999
