web site used for sale

- Cut off 452 mm - Web width 660 mm - 5 I units ( one unit incomplete ), works 4 4 - Folding till A5 - Gas dryer VITS - Control panel - machine still in production

The weber ultrasonic saphir digital is used for automated inline ultrasonic welding. This device is sold without the automation line. Frequency 35kHz, Power 1000W, 230V AC, Sonotrode TR35Ti The machine was used for the production of about 90000 units.

We offer this used Weber Ultrasonics Saphir Digital Manual Station Ultrasonic Welding Machine, built in 2023. About 92500 units were produced with this machine. Sonotrode TR35Ti Frequency: 35kHz Power: 1000W 230V AC Displacement measuring system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or need more information, please feel free to send us a message or give us a call.

The weber ultrasonic saphir digital station is used for ultrasonic welding. The system is sold with a machine table and workpiece holder as shown in the pictures. Frequency 35kHz, Power 1000W, 230V AC (Schuko plug), Sonotrode TR35Ti, Min force 30N, Max force 380N The touch panel has a small defect, but the use is not affected.

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

x-travel: 1.100 mm y-travel: 900 mm z-travel: 1.250 mm control: SIN 840 D spindle turning speed - gearbox stage 1: 20 - 1.333 1/min. spindle turning speed - gearbox stage 2: 1.333 - 8.000 1/min. power capacity at 60% / 100 % load: 50 / 37 KW tool taper: SK50 B - axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 500 U/min feed X/Y/Z/-axis: 1 - 60.000 mm/min rapid traverse: 60 m/min feed capacity X/Y/Z: 17 kN numbers of pallets: 2 pallet size: 800 x 800 mm table load: 1,50 t tool magacine with: 120 Plätzen tool length - max.: 600 mm tool diameter: 135 mm wotkpiece diameter with 2 vacant positions: 350 mm weight of tools max.: 60 kg total power requirement: 150,00 kW weight of the machine ca.: 35,00 t dimensions of the machine ca.: 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation, Pallett-changer with 2 palletts and hydr.  ...

General SKU227T238 MakeGWA Webb Easyfill LocationBarneveld TypeEasyfill ER11-B Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler Powder fillercheck Valve bag fillercheck With screw dosingcheck Number of dosing heads:1 Screw diameter70 mm With motor220-380 Volt, 0.55 kW With hopper± 30 liter With mixer in hoppercheck MaterialStainless steel With jacketcheck General No.002.972 Year of construction2000 Floorspace0,6x0,6 m Total height2,4 m Weight450 Kg Extra SpecificationsGWA control, type HP5 easyfill 2, foot control,&:nbsp:Powder fillersGWA WebbPackaging machines > Powder fillersBrand > GWA Webb What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

Key data: 1350 mm, 3 , 120 mm

Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.

bore capacity in steel (diameter): 40 mm arm length: 1600 mm bore capacity in cast iron: 60 mm spindle diameter: 85 mm quill stroke: mm tool taper: MK 5 speeds: 24 - 1050 U/min feeds: 0,06 - 1,0 mm/U column diameter: 345 mm vertical adjustment of the arm: 900 mm thread cutting attachment: ja Boring motor: 5,5 kw total power requirement: 7,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,5 x 1,0 x 2,99 m Radial drilling machine - Mounting cube 750 x 500 x 500 mm - Digital display for boom travel - Coolant system - Good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Mahlo Model: Webpro M Year of Manufacture:2021 Power supply: 230 V AC Electrical connection: 1L / N / PE Frequency: 50/60 Hz EMC interference class: G Protection class: IP43 Product: Inline quality measurement system QUALISCAN QMS-12 by Mahlo Function: Inline system for continuous measurement of thickness and basis weight during production. Sensors are mounted on a traversing frame and move left to right across the material to measure over the full production width and length. Measured parameters: Thickness Basis weight Additional parameters possible depending on configuration Measurement principles: Thickness measurement by laser triangulation, double-sided measurement of top and bottom surfaces Measurement range: 0–100 mm Reproducibility: ±25–50 µm Basis weight measurement by X-ray transmission X-ray intensity is reduced according to material mas ...

Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece

TECHNICAL SPECIFICATIONS Manufacturer: WEBER Kunststofftechnik Description: Sludge thickener Year of Make: 2025 Usable volume: 28.50 m³ Material: PE-100-RC-WK-S-8000 Permissible. Volume flow: 30 m³/h Inner container dimensions: Ø 2,800 x 5,496 mm Max. filling height: 5,270 mm Operating Pressure: Pressureless Filling medium: Sludge (density approx. 1.10 g/cm³) Permissible. Operating temperature: 20°C, max. 30°C for short periods Agitator: TURBO mixer type NFL4E FG 13/77 (4.0 kW) SPECIFIC COMMENT - Mint condition, never been in use

Manufacturer: WEBER Type: MSG 460 Power: 0.18 kW Power supply: 400 V/50 Hz Weight: 120 kg Dimensions: Depth 600 x Width 540 x Height 760 mm A special device for precise sharpening of knives. The MSG 460 type is designed to ensure high sharpening quality and suitable blade geometry, which is necessary when processing meat, cheese and other foods where maximum cutting precision is required. Blade diameter range: 420–460 mm Sharpening angle adjustment: 15°-35° Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Manufacturer: Weber KSV 1350 4, Type: KLE 1300, Year: 2008, Control: Weber, Monting of the machine: Quer/längs/Quer/Quer/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 5, Sanding belt dimensions: 1370 X 2620/5100 X 150, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 3, Längsschleifaggregate: 1, Bürstenaggregate: 1, Rubber roller: no, Bürstenaggregate: 1, Band 1 Leistung kW : 15, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 2 Leistung kW : 21, Belt 2 shoe unit: CBF Aggregat, Band 2 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 3 Leistung kW : 15, Band 3 Schuhaggregat: yes, Band 3 Queraggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 4 Leistung kW : 15, Band 4 Queraggregat: yes, Band 4 Schleifbandgesc ...

Manufacturer: Weber, Type: OFZ-KS 2, Year: 1993, Control: Weber, Monting of the machine: Quer/lkombi-Schuh/längs, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350/4650 X 150, Rubber roller: 1, Shore roller 1: 150 mm (gummi), Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 1 Schleifbandgeschwindigkeit m/s : 11/22, Belt 2 shoe unit: Kombi, Band 2 Kombiaggregat Walze/Schuh: yes, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-20, Band 3 Kombiaggregat Walze/Schuh: schuh, Band 3 Leistung kW : 11, Band 3 Schleifbandgeschwindigkeit m/s : 2-20, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 4-25, Intermediate sanding of lacquer: yes, Constant table hight: ...

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Line is consisting of:, Weber slicer, Type: CCS904, Serial number: 7096, Year of construction: 2007, Capacity: 2000 RPM, Slice thickness: 0.5 - 50 mm, Compressed air: 10 Bar, 150 L/min., Power: 3 x 400V, 50Hz, 10 kW, Dimensions: 13400 x 1900 x 2600 mm, Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit, Pago labeler, Type: System 516, Serial number: 212516068, Year of construction: 2012, Mettler Toledo metaldetector and checkweigher, Type: XS3, Serial number: 35000430, Year of construction: 2008, With reject, Bosch Sigpack Systems robot / cartoning line, Type: LDM + TTLi, Serial number: J-01659-LDM-042 / J-01659-TTLi-077, Viewtech optical control, Type: VT2007/010, Serial number: VT2007-DCDCL/057, With reject

Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine.

Equipment: heatable/coolable, overpressure, vacuum, manufacturer: Schleifenbaum & Weber, condition: used, volume: 49,338, vacuum: 1.0, max. overpressure: 6.0, specific gravity of the medium: 1.5, lower shelf: clapper bottom, upper shelf: clapper bottom, design: upright, stand form: feet, number of feet: 4, heating/cooling (filter bar): available, max. permissible Operating overpressure double jacket / pipe chamber / bar: 6.0, Max. permissible Operating Temperature : 200,Temperature Control Cylinder: Half Tube Coil,Temperature Control Underbody: Half Tube Coil,Diameter Inside: 2.800,Diameter Outside: 3.100,Cylindrical Height: 7.483,Total Height:

PART NUMBER 7910 SPECIFICATIONS - max workpiece width 1350mm - max workpiece height 150mm – in advance: - rubber roller, pressure roller And the aggregate (metal cylinder grooved for calibration) II aggregate (two metal rollers, smooth + sequential shoe) - rubber roller, pressure roller - cleaning brush – from below: - Introductory roller, metal - pulling tape - Outlet, slip, metal roller - pneumatic oscillation of belts on photocells - electric table lifting - 2 types of feed speed 2-14m/min - main motor 5.5/15kW - brake - grinding height potentiometer - feed motor 0.75kW - working pressure 8bar - Extraction port diameter 200mm, 120mm - dimensions l/w/h 1860x2200x1980mm - weight 1995kg ADVANTAGES – German production – unpainted – DTR documentation – used grinder, very good condition Net price: 38900 PLN Net price: 9262 EUR d ...

Including trim removal unit, Capacity: up to 3 cycles/min, Product length: max 750 mm, Belt width: 800 mm, Seal bar: 1350 mm, Vacuum pump: Busch Panda WV1500B roots, Compressed air: 6 Bar, 250 Nl/min, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 3750 x 1500 x 2200 mm, Weight: 2200 kg

This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.

Description Weber – Bluhm label printing & dispensing system Leg i-Air 4050E-30-RH-2E542-RO90_312-CC from 07/2018 Basic system Legi-Air 40508-CC on K-tripod spindle Rol+Tel Gr2 incl. – vacuum shut-off – digital l/O interface – compressed air monitoring and shutdown – sensor label on stamp – label end of roll warning – 2-stage vacuum – U-arm – terminal terminal – multilingual text display – label large roll unwinding up to 450m running length – design: right / right hand – Pressure module: Zebra 2E500 # 4#-200 dpi – Applicator: rotating stroke 90" – 312mm arm length -RO90_312

This 4-axis Burkhardt-Weber MC100 was manufactured in 1998. It features a working range with an X-axis travel of 3,000 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,500 mm. The machine has a maximum table load capacity of 20,000 kg and a spindle speed of 3,500 RPM. If you are looking to get high-quality milling capabilities, consider the Burkhardt-Weber MC100 horizontal machining centre we have for sale. Contact us for further details.

A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible.

A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible.

A complete Weber slicing and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2006. 2) Weber SCA scanning unit, year of manufacture: 2006. 3) Weber MCS 902 slicer, year of manufacture: 2006, product cross section X/Y: 380mm/125mm, max. product length: 1600mm, slice thickness range: 0.1mm-50mm. 4) Weber inspection and reject unit. 5) Weber transfer station. 6) CFS PowerPak 620, year of manufacture: 2005, film width range: 320mm-700mm, forming depth: 150mm. 7) 2x ELS OP2-SL6215-SMSK302 cross web labeling stations. 8) Videojet Excel 273se printer station. 9) Bizerba MD-SA-F1160/500/200 tunnel metal detector. This is a complete line including an edge trim unit and rewind station. Documentation available. An on-site inspection is possible.

A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Labeler Manufacturer: Weber Alpha Compact Type 150-30-LH Suitable for self-adhesive labels Label width min. 10 mm – max. 150 mm Label length min. 20 mm – max. 300 mm Label roll outside diameter 300 mm Sleeve core diameter 76 mm Including tripod can be moved

Labeler Manufacturer: Weber Alpha Compact Type 150-30-LH Suitable for self-adhesive labels

bore capacity in steel (diameter):5 - 30 mm x-travel:450 mm y-travel:380 mm total power requirement:1,4 / 2,2 kW weight of the machine ca.:1.100 kg dimensions of the machine ca.:1.000 x 1.400 x 2.900 mm gear box:85 - 2.000 U/min spindle diameter:72 mm bore depth:700 mm throat:300 mm spindle taper MT:3 T-slots:3 x 16/25 mm table-size:700 x 300 mm spindle turning speed range:85/170/250/355/475/710/1000/2000 U/min motor speeds::705/1425 Year:ca. 1975

Conveyor Belt/Wire Webbing/Bar Webbing Belt with FU, Control Cabinet - Length 1,000 mm - Width 600 mm -------------------------- Conveyor belt / wire belt / mesh belt with FC, control cabinet - Length: 1,000 mm - Width: 600 mm

Conveyor belt/wire webbing/rod webbing - Length: approx. 3,700 mm - Width: 600 mm --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: approx. 3,700 mm - Width: 600 mm

Conveyor belt/wire webbing/rod webbing - Length: 3,250 mm - Width: 600 mm - Pitch: 12.7 mm - With geared motor --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: 3,250 mm - Width: 600 mm - Partition: 12.7 mm - With gear motor

Conveyor belt/wire webbing/rod mesh webbing belt with center drive - Length: approx. 2,500 mm - Working width: 300 mm - with mid-drive ------------------------------- Conveyor belt / wire belt / mesh belt with center drive - Length: approx. 2,500 mm - Working Width: 300 mm - With center drive

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 16,000 liters double-walled used, with a used diesel pump DK 70 EZ: The pump is 1 year young and was overhauled by the manufacturer general. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 diesel pump DK 70 EZ Container dimensions Length 8,290 mm Diameter 1,600 mm Weight approx. 3,000 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...