web offset used for sale

Height=1.57 m, Overall length= 0.71 m, Overall width= 0.71 m, Net weight= 120 kg,

Height=2.08 m, Overall length= 0.84 m, Overall width= 4.74 m, Net weight= 900 kg,

Height=1.62 m, Overall length= 0.8 m, Overall width= 0.6 m, Net weight= 220 kg,

Height=1 m, Overall length= 0.9 m, Overall width= 1.15 m, Net weight= 325 kg,

WEBER CCS 304 WITH CHECK WEIGHER

WEBOMATIC APS ML 4600 THERMOFORMER

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 50 kg,

Weber SSM, sharpening station for slicer knives

Weber Derinder ASC 460, function tested

WE sharp 7000, sharpening station for slicer knives, demo machine from exhibition

bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 160 mm : 4 speeds: 60 - 1250 U/min table-size: - mm total power requirement: 3,3 kW weight: 900 kg dimensions: - mm Features: -Gear drilling machine with a robust design -Column-mounted drilling table -Right/left rotation -Feed -Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): mm arm length: mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2 mm, 17

Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...

550 mm working width, with 5.4 kw Hatz engine, 300 kg operating weight

Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Manufacturer: Burkhardt + Weber BW Model: MC 120 Year of Make: 1999 Condition: Used Control: Siemens Sinumerik 840C Pallet sizes: 4 pieces 1000 x 1000 mm, 2 pieces 1250 x 1000 mm, 13 pieces 1600 x 1000 mm Pallet system length: 47000 mm Clamping area: 630 x 800 mm Table load: 1500 kg Spindle taper: DIN 50 Spindle speed: 6000 rpm Engine power: 37 kW B-axis travel: 360° Tool magazine: 144 positions Fuel tank capacity: 230 l Spindle bearing and spindle housing overhauled 09/2024.

Weber Waagenbau u. Wägeelektronik, Automatic scale for weighing, year of construction 1989, with Weber control Dialog 165V-SWA, year of construction 2001, max. 2.5 kg, used, Can be viewed on site beforehand,

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW

Werkend uit productie, heeft altijd gelopen met een 800 mm extrusiekop voor het produceren van HDPE buizen. Bwj Uswr Db Nod Dvycjw

This extruder from WEBER is located in the machine storage at Plastima Used Machinery. The machine is from 1997 and is in excellent condition. Brand: Hans Weber GmbH Model: NE 7 048 Screw type: Single screw Year of manufacture: 1997 Screw diameter: 75 mm Be Ud Detpg D Uovyceww L/D Ratio: 30 Operating hours: 76,200

Deze extruder van WEBER staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1983 en verkeerd in prima staat. Bwj Ud Djq Tr Tbevycow – Merk: Hans Weber GmbH – Model: ZE 30 – Bouwjaar: 1983 – Enkelschroefs extruder – Schroef Ø: 30 mm – verhouding: 20 L/D

WEBER buisextrusielijn inclusief: Bws Ud Dvysvryhyscsw WEBER DS 8.5 Elmepla zaag Battenfeld R200/6 Battenfeld V125

Deze extrusienlijn van Hans Weber GmbH staat bij Plastima Used Machinery in de machine opslag. De lijn komt uit 1991 en verkeert in gebruikte, maar goede staat. – Merk: Hans Weber GmbH – Model: WEBER DS 6.5 – Bouwjaar: 1991 – Schroef Ø: 65 mm – Werkuren: 2.364 Bs Udeqpft Ie Dvyceww

General SKU397W1236 LocationBarneveld MakeWeber TypeCE-03 Mach.No.CE 3061 Sizes Screw diameter35 mm Main Features Motor18 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours50927 Screw diameter35 L/D20 Counter rotatingcheck With vacuum pump0,75 kW, 8 m3/h, 2850 rpm Number of heating zones:1 Electric heatingcheck AC-motor18 kW, 220/380 volt Number of temperature controllers:7 Used onPVC Capacity30 kg/h Information Year of construction1985 With switchgearcheck Sizes switchgear0,75x0,37x1,10 m Total height1,50 m Floorspace1,70x0,90 m Weight700 kgDouble screw extrudersWeberExtruders > Double screw extrudersBrand > Weber What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

x-travel: 1600 mm y-travel: 1250 mm z-travel: 1600 mm B-axis (table): 360.000 x 0,001° deg milling-head swivable +/-: (HV) 360.000° deg pallet size:: 1000 x 800 mm table load: 3000 kg tool taper: SK 50-B spindle turning speed range: max. 8000 U/min transmission ratio: 2 spindle drive: (100/40 % ED) 37/50 kW feeds x/y/z -stepless: 30000 mm/min total power requirement: 75 kVA weight of the machine ca.: t dimensions of the machine ca.: 11555 x 7998 x 5050 mm Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line 2-station pallet changer 330-position tool changer (max. tool length 600 mm) Tool taper cleaning system Special cabin Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chi ...

Belt dewarper Weber ASB 400, with a new feed belt (the old one can still be seen in the photo), new pressure wheels for an extra charge, Connection 400V, dimensions LxWxH approx. 103x80x123cm, weight approx. 187kg, very good used condition, runs perfectly and quietly.

Height=1.07 m, Overall length= 1.43 m, Overall width= 1.04 m, Net weight= 598 kg,

Brand: Hans Weber GmbH Model: ZE 20 Type Screw: Single screw Year of construction: 1999 Screw diameter: 20 mm L/D ratio 20 L/D Motor power: 3 kW Control Voltage: 200 V Dimensions (LxWxH): 3100 x 1200 x 1280 mm Weight: Approx. 300 kG Other: – Including swivel mounting arm – Including extra connection box

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

Used vacuum packaging machine made by Webomatic typ CD 120 . New: 2009. Bush vacuum pump type: RA 0100 F 503. 100 m³/h. 400 V, 3 Ph, 50 Hz, 5.4 A, 2.2 kW. Overall dimensions: 1420 mm x 820 mm x 1010 mm. Sealing length: (2x) 640 mm. Chamber dimensions: (2x) 640 mm x 620 mm.

arm length: max 1500 mm taper MK: 5 weight: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell here a vacuum sealer from the manufacturer Webomatic, type Supermax in a good used and functional condition. The machine runs on 400 volts, 1.5 kW, rollable, chamber dimension W/D/H 60/50/24 cm, completely stainless steel, sealing bar right and left, workshop tested, dimensions W/D/H 80/70/95 cm, others on request.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.

- Cut off 452 mm - Web width 660 mm - 5 I units ( one unit incomplete ), works 4 4 - Folding till A5 - Gas dryer VITS - Control panel - machine still in production

A high-performance slicer and portioner Weber including scale, knife sharpener and a conveyor belt is available. Knife type: circular knife, knife diameter: 460mm, slicing thickness range: 0.1mm-50mm, design: 1200mm, machine dimensions X/Y/Z: approx. 2500mm/1200mm/2200mm, weight: approx. 1500kg. An on-site inspection is possible.

We offer this used Weber Ultrasonics Saphir Digital Manual Station Ultrasonic Welding Machine, built in 2023. About 92500 units were produced with this machine. Sonotrode TR35Ti Frequency: 35kHz Power: 1000W 230V AC Displacement measuring system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or need more information, please feel free to send us a message or give us a call.

The weber ultrasonic saphir digital is used for automated inline ultrasonic welding. This device is sold without the automation line. Frequency 35kHz, Power 1000W, 230V AC, Sonotrode TR35Ti The machine was used for the production of about 90000 units.

The weber ultrasonic saphir digital station is used for ultrasonic welding. The system is sold with a machine table and workpiece holder as shown in the pictures. Frequency 35kHz, Power 1000W, 230V AC (Schuko plug), Sonotrode TR35Ti, Min force 30N, Max force 380N The touch panel has a small defect, but the use is not affected.

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

x-travel: 1.100 mm y-travel: 900 mm z-travel: 1.250 mm control: SIN 840 D spindle turning speed - gearbox stage 1: 20 - 1.333 1/min. spindle turning speed - gearbox stage 2: 1.333 - 8.000 1/min. power capacity at 60% / 100 % load: 50 / 37 KW tool taper: SK50 B - axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 500 U/min feed X/Y/Z/-axis: 1 - 60.000 mm/min rapid traverse: 60 m/min feed capacity X/Y/Z: 17 kN numbers of pallets: 2 pallet size: 800 x 800 mm table load: 1,50 t tool magacine with: 120 Plätzen tool length - max.: 600 mm tool diameter: 135 mm wotkpiece diameter with 2 vacant positions: 350 mm weight of tools max.: 60 kg total power requirement: 150,00 kW weight of the machine ca.: 35,00 t dimensions of the machine ca.: 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation, Pallett-changer with 2 palletts and hydr.  ...

General SKU227T238 MakeGWA Webb Easyfill TypeEasyfill ER11-B LocationBarneveld Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler Powder fillercheck Valve bag fillercheck With screw dosingcheck Number of dosing heads:1 Screw diameter70 mm With motor220-380 Volt, 0.55 kW With hopper± 30 liter With mixer in hoppercheck MaterialStainless steel Information No.002.972 Year of construction2000 Floorspace0,6x0,6 m Total height2,4 m Weight450 Kg Extra SpecificationsGWA control, type HP5 easyfill 2, foot control, :Powder fillersGWA WebbPackaging machines > Powder fillersBrand > GWA Webb What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...

Key data: 1350 mm, 3 , 120 mm

Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.

arm length: 1450 mm taper MK: 4 Cube: ja weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm arm length: 1600 mm bore capacity in cast iron: 60 mm spindle diameter: 85 mm quill stroke: mm tool taper: MK 5 speeds: 24 - 1050 U/min feeds: 0,06 - 1,0 mm/U column diameter: 345 mm vertical adjustment of the arm: 900 mm thread cutting attachment: ja Boring motor: 5,5 kw total power requirement: 7,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,5 x 1,0 x 2,99 m Radial drilling machine - Mounting cube 750 x 500 x 500 mm - Digital display for boom travel - Coolant system - Good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible.

Manufacturer: Mahlo Model: Webpro M Year of Manufacture:2021 Power supply: 230 V AC Electrical connection: 1L / N / PE Frequency: 50/60 Hz EMC interference class: G Protection class: IP43 Product: Inline quality measurement system QUALISCAN QMS-12 by Mahlo Function: Inline system for continuous measurement of thickness and basis weight during production. Sensors are mounted on a traversing frame and move left to right across the material to measure over the full production width and length. Measured parameters: Thickness Basis weight Additional parameters possible depending on configuration Measurement principles: Thickness measurement by laser triangulation, double-sided measurement of top and bottom surfaces Measurement range: 0–100 mm Reproducibility: ±25–50 µm Basis weight measurement by X-ray transmission X-ray intensity is reduced according to material mas ...

TECHNICAL SPECIFICATIONS Manufacturer: WEBER Kunststofftechnik Description: Sludge thickener Year of Make: 2025 Usable volume: 28.50 m³ Material: PE-100-RC-WK-S-8000 Permissible. Volume flow: 30 m³/h Inner container dimensions: Ø 2,800 x 5,496 mm Max. filling height: 5,270 mm Operating Pressure: Pressureless Filling medium: Sludge (density approx. 1.10 g/cm³) Permissible. Operating temperature: 20°C, max. 30°C for short periods Agitator: TURBO mixer type NFL4E FG 13/77 (4.0 kW) SPECIFIC COMMENT - Mint condition, never been in use

Manufacturer: WEBER Type: MSG 460 Power: 0.18 kW Power supply: 400 V/50 Hz Weight: 120 kg Dimensions: Depth 600 x Width 540 x Height 760 mm A special device for precise sharpening of knives. The MSG 460 type is designed to ensure high sharpening quality and suitable blade geometry, which is necessary when processing meat, cheese and other foods where maximum cutting precision is required. Blade diameter range: 420–460 mm Sharpening angle adjustment: 15°-35° Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60